CODE 3 Solutions

Call Directions Contact the business

CODE 3 Solutions Built on craftsmanship! Bushnell, Florida. Specialized in Classics, Electrical, and Fabrication

Off the beaten path from the classics and hot rods. Manufactured a jig to assemble some production parts for an aviatio...
10/17/2026

Off the beaten path from the classics and hot rods. Manufactured a jig to assemble some production parts for an aviation project.

Mobile service for Mr. Kevin on a low mile 99 Camaro. All new hydraulics and clutch kit w/ flywheel.
10/17/2026

Mobile service for Mr. Kevin on a low mile 99 Camaro. All new hydraulics and clutch kit w/ flywheel.

Mr. Mike’s early Ford Mustang — 260 V8/automatic.After a few mobile visits, we were able to get the fluid leaks sealed u...
09/28/2026

Mr. Mike’s early Ford Mustang — 260 V8/automatic.

After a few mobile visits, we were able to get the fluid leaks sealed up. All of the bad wiring was corrected and cosmetically adjusted to match the original harness.

We updated the ignition with an electronic pickup, new coil, custom-fit wires, cap, rotor, and plugs. A very nicely restored two-barrel carburetor from National Carb was also added to the list.

To finish it off, we recharged the A/C after correcting the leaking Schrader valves.

We appreciate the opportunity to bring this Mustang back to where it belongs!

After 13 years of sitting on jack stands, we were fortunate enough to give Mr. Brown an opportunity to drive it around t...
09/23/2026

After 13 years of sitting on jack stands, we were fortunate enough to give Mr. Brown an opportunity to drive it around the block again.

09/23/2026

Just the daily routine....

Of course we had to alter everything to fit correctly. Larger condenser, updated compressor, relocated dryer, trinary...
08/21/2026

Of course we had to alter everything to fit correctly. Larger condenser, updated compressor, relocated dryer, trinary switch, electric fans, relays and custom hoses.

Project T BU🇬🇧KKIT update. Beautiful new brass lantern tail lights are mounted. And we now have an updated brake pedal ...
08/21/2026

Project T BU🇬🇧KKIT update. Beautiful new brass lantern tail lights are mounted. And we now have an updated brake pedal assembly we modified to fit the cabin. We fabricated new stainless hard lines to try to match the existing holes in the chassis for mounting. We may be a little biased but we think they turned out okay.

08/01/2026

Anyone a fan of a 396 Big lots Chevy in the morning?!?!?! Craig's 1963 Impala SS black on black is mere completion for this stage. We took this project down as a non-running or operating vehicle to a no pedal needed cold start champ. Craig also gave us the go-ahead to clean up a lot of the engine details. The car is also equipped with a tremec 5-speed and exhaust cutouts.

The difference is in the details. These little changes take time, patience, and plenty of trial and error—but seeing the...
07/28/2026

The difference is in the details. These little changes take time, patience, and plenty of trial and error—but seeing the finished product makes every minute worth it.
Quality isn't rushed, and the satisfaction of getting it right is why I love what I do. Thanks to everyone who trusts me with their projects!

P.S. I ruined a $25 tee that is in the photos on the lathe trying to machine it too fast. One of the very first times I've machined stainless.

07/27/2026

We had the privilege of helping Mr. Vance diagnosed, change a few parts, and tuned this beautiful 1969 Charger RT big block beauty right in his own garage.

Address

Bushnell, FL
33513

Telephone

(352)8150221

Website

Alerts

Be the first to know and let us send you an email when CODE 3 Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CODE 3 Solutions:

Shortcuts

Share

Category