Muscle Rod Shop

Muscle Rod Shop Blending Art with the Muscle Car. Focused Widebody concepts while Respecting Original Design.

Throwback to when we had double trouble in the shop. 👀Two 1968 B-bodies. Two 392 Hemi swaps. Two 4-speed automatics. Bot...
09/03/2026

Throwback to when we had double trouble in the shop. 👀

Two 1968 B-bodies. Two 392 Hemi swaps. Two 4-speed automatics. Both coming together side-by-side at the exact same time.

It’s what’s underneath that makes the difference. 🔥This ’68 C10 is just as dialed in underneath as it is on the outside....
09/01/2026

It’s what’s underneath that makes the difference. 🔥

This ’68 C10 is just as dialed in underneath as it is on the outside. From the chassis to the LS power, brakes, wiring, interior details and everything in between, every piece of this build was chosen with a purpose.

A lot of great partners came together to help us build one seriously well-rounded street truck. 👊

Roadster Shop Spec Chassis
Smeding Performance LS
Wilwood Engineering Brakes
Billet Specialties Wheels
American Autowire Harness
Vintage Air AC
Nu-Relics Power Windows, LLC
Dakota Digital RTX Gauges

A classic 1967 Ford Bronco… built completely from the ground up. 👏We’re wrapping up this build after putting over 500 mi...
08/31/2026

A classic 1967 Ford Bronco… built completely from the ground up. 👏

We’re wrapping up this build after putting over 500 miles on it and completing testing. While it may look like a ’67 Bronco, there isn’t a single original part on it.

▪️ Kincer “Adventure Series” chassis
▪️ Gen 3 5.0L Coyote
▪️ 10R80 transmission
▪️ Atlas Transfer Case
▪️ Custom leather-wrapped interior

Classic Bronco styling with an entirely modern foundation. Now that testing is complete, this one is just about ready to hit the road. 🔥

08/29/2026

We were excited to have Eli Cuevas’s 1966 Superformance GT40 in the shop and get the opportunity to work on such an iconic piece of automotive history.

Powered by a 427” Roush aluminum block and backed by a 5-speed ZF transaxle, this is one of those cars you could stare at all day.

08/28/2026

When a car has had nearly 60 years of its life documented, you don’t stop now. 👀

Eli Cuevas brought us his 1966 Superformance GT40 for some TLC, and while we took care of the car, we made sure everything we did was documented along the way.

We’re excited to be working with Rowan @ GlobalWorkshop to track and manage our builds using Global Workshop’s Smart Code feature. It keeps our notes with the car, creating a permanent record of the work performed, what we observed, and recommendations for future service.

That means every visit adds to the car’s history and no important detail gets lost along the way. 🔧

Hard to believe that just a couple years ago, there wasn’t much more here than a floor pan and some frame rails. Seeing ...
08/25/2026

Hard to believe that just a couple years ago, there wasn’t much more here than a floor pan and some frame rails. Seeing how far this build has come makes going back through these old photos even better.

Next up: a Redeye crate motor and 8-speed 8HP90. 🔥

Can't wait to get the ’57 out of the shop and stretch its legs! 🔥After a little taste driving under its own power, we're...
08/24/2026

Can't wait to get the ’57 out of the shop and stretch its legs! 🔥

After a little taste driving under its own power, we're itching to start putting some miles on it and getting everything dialed in after interior. Hard to beat seeing this one sitting out in the Texas sun. 😎

08/21/2026

426 cubic inches of Gen-3 HEMI goodness. 🔥

This BluePrint Engines 426 arrived for our ’70 Cuda build, paired with a TKX 5-speed. Safe to say this combination should make this Cuda a whole lot of fun. 👀

The ’68 Bronco interior has officially arrived. 👀Everything from the seats and door panels to the dash pad, center conso...
08/20/2026

The ’68 Bronco interior has officially arrived. 👀

Everything from the seats and door panels to the dash pad, center console, and even the cupholders came ready to completely transform the inside of this build.

Huge thanks to Velocity for helping us get this Bronco one step closer to finished. 🔥

Michael’s 1964 Corvette has come a LONG way. 🔥From classic American icon to a completely modernized performance build, t...
08/19/2026

Michael’s 1964 Corvette has come a LONG way. 🔥

From classic American icon to a completely modernized performance build, this one is rounding the corner on completion and headed off for interior. The before and after on this car speaks for itself.

Roadster Shop Spec-Seven chassis
Smeding Performance 427 LS
TKX
Baer Brakes

American Autowire
OPTIMA Batteries
Tanks, Inc.

Address

30875 IH 10 Bldg. H
Boerne, TX
78006

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+18307557700

Website

Alerts

Be the first to know and let us send you an email when Muscle Rod Shop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Muscle Rod Shop:

Shortcuts

Share

Category