The Race Engine Shop

The Race Engine Shop Shop Slogan: Make Engines Great Again (M.E.G.A.) Break Records Not Parts! We specialize in building high performance engines from mild to wild.

08/23/2024

Iron Headed Big Block Chevy Playing in the mud

08/02/2024

Rob’s 781 headed .060 over 454 that we built him at The Race Engine Shop

The hydraulic. Roller camshaft is pretty mild too.

Rob took it to a facility with an engine dyno and it put out 615 Horse Power & 689 Ftlbs of Torque not too shabby Robbie it should be fun in that truck.

LS9 Cylinder Heads Casting Number 1771 Backstory: Same Customer From my piston post. Customer who was referred to me by ...
09/10/2023

LS9 Cylinder Heads Casting Number 1771

Backstory: Same Customer From my piston post. Customer who was referred to me by a tuner / chassis builder and the customer who was supplied these heads got pi**ed off at the tuner / chassis shop and called me to cancel the build. Refused to take his parts and pay the labor I’d already performed to that point and did a credit card charge back on me to the tune of about $15K and forced me to take these heads. He will be dealt with, in the mean time I want to move these heads. They are good heads and will work well in a variety of applications. See below for details.

•356-T6 Rotocast Aluminum Castings
•Performance Valve Job
•CNC Ported Intake & Exhaust Runners
•Thicker Decks Than The LS3 Castings
•reenforced Webbing
•Del West Titanium Intake Valves
•Chevy Performance Exhaust Valves
•Intake Valve Lash Caps
•Approximately 70cc Combustion chamber (Factory)
•will include free of charge Factory Rockers With CHE Trunion Upgrade

•Comes With .660” Lift Valve Springs (not installed but pictured) and Titanium Retainers
Set up to your provided cam specs. (Sorry about the packaging dust on them they will be disassembled, cleaned and reassembled prior to buyer getting them.

If you are serious and need a good set of heads get in contact with me: (989) 971-7585 (Cell), [email protected] (Email) or though Facebook messenger here or on my shop page The Race Engine Shop (Social Media)

$3,835

Spec’ed and designed these for a customer who was referred to me by a tuner / chassis builder and the customer who was s...
09/10/2023

Spec’ed and designed these for a customer who was referred to me by a tuner / chassis builder and the customer who was supplying his own custom 3.750” stroke crank but never did. Instead the customer got pi**ed off at the tuner / chassis shop and called me to cancel the build. Refused to take his parts and pay the labor I’d already performed to that point and did a credit card charge back on me to the tune of about $15K he will be dealt with, in the mean time I want to move these custom pistons. See below.

These Pistons are ready to go to war! These were designed for big power adder applications.

•Custom 2618 Aluminum LS Full Round Design
•Thick Skirts & Crown
•Banana Grove Oil Slots
•Hard Anodized & PTFE Coated
•Piston Pin Buttons (This is the best pin Locking system for big power adder stuff)
•Total Seal Advanced Profiling Stainless Ring Pack: Gapless 1/16” Top Ring, .043” Ductile Iron Napier 2nd Ring and 3/16 Oil Ring.
•H13 Tool Steel Wrist Pins Diamond Like Carbon (DLC) Coated. .927” Diameter.
•1.240” Compression Height
•Designed for a 6.125” Rod and a 3.750” Stroke

These pistons in this configuration Retail for about $2,800 or so. I’m willing to take significantly less than that just to move them. However out of respect for Diamond Pistons, my fellow engine builders / distributors and the industry as a whole I will not post what I’m willing to let these go for in public. If you are serious and need a serious piston and these fit your stroke and rod combo get in contact with me: (989) 971-7585 (Cell) [email protected] or though Facebook messenger here or on my shop page The Race Engine Shop

08/17/2023

Our Customer Everett Laforge Rollin out with one of our LS combos!

05/15/2023

Rick has the 421 sbc we repaired for him running already.

Our Customer Rick Came to pick up his 421 SBC we repaired for him. He’s got it back in the chassis and running (see late...
05/15/2023

Our Customer Rick Came to pick up his 421 SBC we repaired for him. He’s got it back in the chassis and running (see latest video post) ready to go turn some laps.

Our customer Everett Laforge and his Car “Side Bitch” Rippin! Everett Runs one of our 388 CID Dart Machinery LS Next Bas...
04/27/2023

Our customer Everett Laforge and his Car “Side Bitch” Rippin! Everett Runs one of our 388 CID Dart Machinery LS Next Based Combinations.

Our customer Eric Englert getting a reaction from his wife in his Mitsubishi 3000GT! This had one of our Dart Machinery...
04/19/2023

Our customer Eric Englert getting a reaction from his wife in his Mitsubishi 3000GT! This had one of our Dart Machinery based short blocks under the hood. Outfitted With Diamond Pistons and Callies Performance Products Ultra Connecting Rods.

The car still retained all wheel drive. Unfortunately the car was involved in an accident and is no more. But it sure was neat!

Address

3591 Schumann Road Unit #8
Bay City, MI
48706

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+19899717585

Website

Alerts

Be the first to know and let us send you an email when The Race Engine Shop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Race Engine Shop:

Shortcuts

Share

Category