Insomnia Bagger Audio

10/31/2026

Happy Halloween!!!

10/28/2026

Bike rolled back into the shop ready for serious bass reinforcement and power. We overhauled the sub stage and amp rack from the ground up:
​🔹 Sub Stage: Pulled the previous 8" woofers and stepped up to Nemesis Audio 10" subs. Cut in Nagy’s 10" rings with custom carpeted toppers and 3" Aero ports.
🔹 Power: Replaced the previous 1600.4 with a Nemesis NAX3000.1D mono block to deliver clean, dedicated headroom.
🔹 Control: Custom laser-engraved Keith Dube Dubes Bass K**b giving that factory fit and finish you can only get with the Dubes bass k**b.
🔹 Fabrication Details: Custom embossed Insomnia Bagger Audio tour pack amp tray, plus a custom 3D-printed Grim Reaper accent on the lid.
🔹 Acoustic Tuning: Complete full-system DSP retune on the RTA for clean, balanced output at highway speeds.
​Built clean. Wired right. Tuned to perform.
​📍 Insomnia Bagger Audio | Battle Creek, MI
📞 269-224-8119
MECP Expert Certified Installation & Authorized Dealer
​

Send a message to learn more

10/25/2026

if your bike has a monoblock amp or Mid-bass or Subwoofers, you need precision control on the bars or the dash.
Here’s a workbench look at why we install Dube’s Custom Street Machines controllers on our builds:
• Plug-and-play fitment for Dashes and Handlebars
• Single & multi-amp configurations for Supported Brands
• Dual clip indicator models & laser-engraved billet k**bs
• Weatherproof, vibration-tested, and built 100% in-house by Keith Dube
Hit the video for the full breakdown, or contact the shop to lock in your hardware and custom audio build.

🔊 Insomnia Bagger Audio | Battle Creek, MI
📞 269-224-8119

Ride Hard. Play Louder!

Keith Dube Riding With Brendan

10/17/2026

I have a pretty stellar announcement upcoming involving a NEW long term partnership that has been in the works for a while. If I’m being honest, this one makes a lot of sense. I have gathered premiere sponsors for the future that are really going to unleash the shows true potential as we grow. The picture might give it away but formal announcement to follow!

10/14/2026

Harley Ultra in for a 4 speaker Cicada Audio LLC setup.

Cicada CXK6.5 kit up front
Cicada CXX in the tour pack.
Cicada FLX700.4PRO

And as always... No cutting or splicing into any factory harnesses! All proper wiring and routing.

Tuned up with the RTA and dialed in on the Cicada DIALD software DSP! She's sounding good!

Still more to come! Trying to get a little caught up on videos and what's been going on.

Give a call and let's get your bike in before the 2027 season hits! Be ready, be prepared. And get it done!

Insomnia Bagger Audio
Battle Creek Michigan
269 224 8119

10/14/2026

Something a little different. How about audio on a Yamaha!

Client had another shop install Audio last season. And let's just say the 2 Bluetooth 3" handlebar speakers that were installed were a little better than the phone itself is questionable.

Not anymore. Took the old stuff out and did it right this time! Client was ecstatic!

Added a Cicada Audio LLC FLX700.4PRO in the Saddlebag. All in 1 amp, DSP, Bluetooth.

Cicada 4ga 3-in-1 quick disconnect at the saddlebag for Power, Ground and remote, used the Molex waterproof connector at the Saddlebag for the speaker quick disconnects. Making the saddlebags and the bike 100% serviceable in the matter of seconds.

Installed 6.5" pods to the engine guard bar with a set of Cicada CH6.5s. so you know it's loud and crystal clear! I forgot to get a video of it playing. But, it's a set of Cicada CH series so, we all know it sounds GOOOOOD!!!!!

What do you have? Do I only do Harley's? No! Harley's, Indian, Golf Carts, Classics, Boats, Side by Sides. If it needs an audio upgrade? Let's hear about it.

Insomnia Bagger Audio
Battle Creek Michigan
269 224 8119

10/14/2026

Harley Ultra in for a 6 Speaker Cicada Audio LLC system and the new Vinland Rebel Head unit.

All in the bike was treated to:
Vinland Rebel Head Unit
Bike came back a week later and we added lowers as well.
3 Sets of Cicada CXX6.5s
Cicada FLX700.4PRO amp.
309 Custom Audio Waterproof Fairing Shroud
Proper wiring and routing.
No cutting or splicing of any factory harnesses.

After a solid tun with the PRO amp DIALD DSP this bike is singing, Crystal clear and ready for the road.

The new Vinland head unit has about as many widgets and apps as your phone! This thing is an On-Board PC! Hooked it up to WIFI and played music videos! Not that you'll be using that function often. But, DAMN pretty sweet you can! It's in stock! Who needs one?

Head unit also comes with dual front and rear facing cameras with a DVR. And a ton of recording options.

Want to film your next run through the Tail of the Dragon? This thing will do it! Front and rear cameras will catch it all.

Someone mess with your bike or did it get hit in the parking lot while you were grabbing a cold one? The embedded sensor will feel that nudge and start recording immediately! Catch who and what happened? Need to activate the cameras from your phone? Check your bike and see what's going on around it? Yup... You can do that too.

Plus, it has embedded digital outputs. Control LED lights, air ride, center stand? It can do that to. And the list goes on.

Call or text to get on the schedule or go over your build!

Insomnia Bagger Audio
Battle Creek Michigan
269 224 8119

10/12/2026

Share - Like- Follow

​RIDE HARD. PLAY LOUDER. 🔊 Factory sound doesn’t even cut it at 25 MPH, and forget about it at 75MPH! Upgrade your ride with a crystal-clear Cicada Audio systems professionally installed and tuned.

​Choose your build package starting at:

​2-Speaker Setup (Fairing Only): $1,800

​4-Speaker Setup (Fairing + Lids): $2,700
(Already have 6x9 lids? Take $300 OFF Excludes factory 5x7s)

​6-Speaker Setup (Fairing, Lids & Tour Pack): $3,050
(Alternative setup: Fairing, Lowers & Tour Pack Pods for $2,700)

​🔥 Custom Add-Ons & Upgrades:
​10-Inch Mid-Bass Drivers complete with the industry standard Keith Dube Dubes bass k**b: Call for custom enclosure pricing and setup
​2023.5+ Harleys: Add $400 for required A2B Module integration

​Every build is complete with a DSP, a waterproof fairing shroud and calibrated for zero distortion, maximum road output, and clean power delivery. Spots fill quickly—lock in your installation date today.

​📍 Insomnia Bagger Audio
158 Peck St, Battle Creek, MI
📞 (269) 224-8119
✉️ [email protected]

​Send a message directly to the page or call the shop to book your build.

​

07/05/2026

And another Client installed system. This one came in for a DSP install and full tune. Client and his boy hung out for a couple hours while the install and tune was done.

Client did a very nice job on his self install. I just added in wire ferules on the power ground and speaker wires at the amp to make sure theres no chance of arcing, fraying and a positive permanent connection at the amp.

Client supplied a new Arc Audio PSM PRO DSP. Got it all wired in and tuned up the full Cicada Audio LLC CXX Speaker setup. Nice and crystal clear now.

Thank you for the opportunity to get your Cicada setup singing!

Insomnia Bagger Audio
Battle Creek Michigan
269 224 8119

07/05/2026

Client installed full Cicada Audio LLC 6 speaker high power RG in for a little wiring rescue and Tune.

After the Client did the original install it ended up in a couple others hands for some tuning. But, it never really sounded like a full Cicada bike should.

Unfortunately due to the way the wires were routed to the Saddlebags. The wiring came into contact with the drive belt. And that's never going to end up good. Client ended up bringing the bike down and it definitely sounds and looks like a killer 6 Speaker High Power Cicada bike should now.

Swapped in a new Limitless Lithium V3 Battery.
All wires are properly routed now for safety and reliability.
Found potential fire and arcing issues with the 1/0 ga fuse holder under the side cover leading up the fairing distribution block. Made the necessary repairs there.
Added in a 309 Custom Audio Waterproof Fairing Shroud to protect that big investment!
Final tune and she's singing and the Cicada 10s are putting in work!

All it needs now is an upgraded Keith Dube bass k**b for the Cicada FLX 2500.1 sitting in the fairing.

Need a funnel install?
Need a Tune?
Need some wiring help?

Insomnia Bagger Audio is here to get it done right!

Insomnia Bagger Audio
Battle Creek Michigan
269 224 8119