Midwest Air-Cooled & Machine LLC

Midwest Air-Cooled & Machine LLC Specializing ONLY in Air-Cooled VWs! Service work, full machine shop, in house engine dyno! We also offer metal work and rust repair.

Specializing in air-cooled VWs of any model: Bug, Ghia, Bus, Type 3, VW powered dune buggies or kit cars. If it has an air-cooled engine in it, or was built out of a Volkswagen, we can perform any kind of repair or restoration work needed. From tune ups, electrical system repair, or brake work, to interior/exterior finish work, and everything in between. We have an in house machine shop and build

engines in any configuration from 36hp to stroker 2300cc+. Naturally aspirated or turbo. We have built hundreds upon hundreds of these engines and can build you a combination to suit street, strip, off road, or for a dependable daily driver. From the machine work, assembly, turbo system fab work, to carb tuning... Its all done here at Midwest Air-Cooled. We rebuild all types of VW transaxles: swing axle Bug, swing axle early Bus w/ reduction boxes, IRS, and Bus 3/5/6 rib. Stock and performance builds are available. Over 50 years of professional experience with air-cooled VWs between all of us at the shop. There isn't a nut or bolt we haven't touched on these cars. We operate with the "quality over quantity" mindset. All our work is done right, and we stand behind it. All of our engines are backed by a warranty. Check out our feedback rating and take a look at the comments left by our customers. Business hours are listed as M-F, however we are available Saturdays by appointment for pick up or drop off of vehicles. We will do our best to work around your schedule, just give us a call!

We've got some parts left over from a couple jobs for sale:EMPI 2.5" drop spindle King Pin wide 5/Porsche pattern disc b...
08/25/2026

We've got some parts left over from a couple jobs for sale:

EMPI 2.5" drop spindle King Pin wide 5/Porsche pattern disc brake kit (spindles already rebuilt with new king and link pins). This is a brand new kit that was never installed, all parts included. Will need a set of KP spindles in exchange for the knuckles. $800 for the kit, which between the kit, king pins, and link pins you're getting the spindle rebuild labor for free.

Good used set of 5.7" Chevy journal H beam rods, 5/16 bolts. Rods don't have much time on them, bushings are tight. We changed up the engine combo on a build. These are out there for around $400 for the set. Selling for $200

08/24/2026

Judson Supercharged 36H for sale, details in the next post down

For sale:  completely rebuilt, dyno tested/tuned Judson supercharged 36H. Complete with stainless CSP Sebring exhaust. T...
08/24/2026

For sale: completely rebuilt, dyno tested/tuned Judson supercharged 36H. Complete with stainless CSP Sebring exhaust. This includes the correct thin slot 12V 90mm generator rebuilt with Porshe armature. 12v coil and Pertronix electronic ignition fit in the 36H distributor. Also included but not pictured is a set of cotton jacketed original style plug wires. Can also be set up to be 6v if the buyer chooses. Engine has the Wolfsburg West Okrasa cam, all NEW: pistons/cylinders, exhaust valves, lifters/pushrods, valve springs, bearings, and oil pump. We have a full build sheet for the engine with all the details. It can be put back on the dyno if you'd like to hear it run, or we can install it in your VW. Please call us for further details. Price is $9500 outright.

Before anyone gets worked up over the price, keep in mind the Judson kit is easily worth $2500 by itself (the charger has been rebuilt with new bearings, sliding veins, etc). Additionally the CSP exhaust was nearly $1,000, and 12v 90mm generators are going for $600+ these days. If you're interested, please call the shop @ 314-775-6000

Thickwall 1835cc set up for a customer's   getting finished up on the dyno today at
08/20/2026

Thickwall 1835cc set up for a customer's getting finished up on the dyno today at

This 1600 running original fuel injection was pulled and cleaned up from a customer's VW that's been sitting 20 years. W...
08/19/2026

This 1600 running original fuel injection was pulled and cleaned up from a customer's VW that's been sitting 20 years. We have all the necessary wiring and fuel system built onto our dyno to make FI and engines a plug and play affair. This allows us to test these engines as equipped and tune the injection with wide band 02 readings before installation.

  in for some tune up work and general once over..
08/17/2026

in for some tune up work and general once over..

07/30/2026

We are closed for Vacation! We will reopen Monday, August 10th. Thanks!

Back on the dyno again with the 2233.. First block ended up having an oil leak issue thanks to some incorrect machine wo...
07/28/2026

Back on the dyno again with the 2233.. First block ended up having an oil leak issue thanks to some incorrect machine work on one of the case halves that unfortunately slipped our radar when it was built. This block is nice and dry!

Haven't had a chance to post many updates lately, we have been extremely busy! VW's everywhere!
07/14/2026

Haven't had a chance to post many updates lately, we have been extremely busy! VW's everywhere!

Address

7280 Old Missouri 21 (Building #2)
Barnhart, MO
63012

Opening Hours

Monday 9am - 5:30pm
Tuesday 9am - 5:30pm
Wednesday 9am - 5:30pm
Thursday 9am - 5:30pm
Friday 9am - 5:30pm

Telephone

+13147756000

Website

Alerts

Be the first to know and let us send you an email when Midwest Air-Cooled & Machine LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Midwest Air-Cooled & Machine LLC:

Shortcuts

Share