Wilson Performance and Coatings

Wilson Performance and Coatings Offer a full line of ceramic coating
Thermal barriers
heat dispersement
antifriction
firearm coating
lsx performance parts

Offering a full line of ceramic coating! Thermal barriers for your headers and exhaust ,turbo hot sides to keep the heat in the pipe and cut down on engine bay temps. It makes a 400* difference in treated surfaces vs uncoated. The same can be used on intake manifolds and anything you would like to aid in the prevention of heat soaking. Piston coating to cut down cylinder temps and it aids in the p

revention of hotspots! the same can also be added to the combustion chambers of heads and the face of the valves. Anti-friction coating which is a dry film l**e that is used on piston skirts,camshafts,crankshafts, bearings and gears. It decreases the friction and wear of the item. Heat dispersement coating that is used on radiators, intercoolers,turbo cold side piping, and intake manifolds. It allows heat to leave the part faster than an untreated part. Turbine coating that is also a thermal barrier, is used on cast wheel turbos, compressor housings,and inside intake manifolds. it has shown to increase CFM between 2-5 all while decreasing heat soke. Firearm coatings in many colors and a coating to allow it to run l**eless. I also specialize in LSX performance, whether you need parts installed or carry out i'm happy to meet your needs. I'm a dealer for brian tooley racing.

Another custom kit, done in Glacier black. Really appreciate the business!
06/11/2016

Another custom kit, done in Glacier black. Really appreciate the business!

A kit done up in Glacier gold. Kit was built by Nick sherlock, and going out to a customer of his. Entire kit is stainle...
06/11/2016

A kit done up in Glacier gold. Kit was built by Nick sherlock, and going out to a customer of his. Entire kit is stainless steel.

Customer Bobby Kruck with his beast of a turbo back on the great white after I coated the hotside. Appreciate the busin...
06/07/2016

Customer Bobby Kruck with his beast of a turbo back on the great white after I coated the hotside. Appreciate the business Bobby!

Thermal coating on some pistons and combustion chambers. Anti friction on the skirts. Just finished them up,and on to ...
02/12/2016

Thermal coating on some pistons and combustion chambers. Anti friction on the skirts. Just finished them up,and on to the next set. I'm still running behind a couple weeks, please bear with me. I appreciate the overwhelming business and support!

Just wanted to let everyone know that I am the only certified applicator in this area,and 140 mile radius of Fort smith...
12/12/2015

Just wanted to let everyone know that I am the only certified applicator in this area,and 140 mile radius of Fort smith AR. NIC Industries stands behind me as an applicator of their products. Don't spend your money twice. I'll make sure it's done right the first time! I offer cerakote firearm and cerakote automotive ceramics. As well as prismatic powders powder coating. There are over 2200 colors in that line up! Please share this with your friends and let them know where to go for their needs of coating. As always thank you for your continued support!

Subaru equal length header and up pipe.
10/29/2015

Subaru equal length header and up pipe.

10/28/2015

Stay tuned! Will be offering a full line of powder coating within the next month. Thanks everyone, it's a big step forward!

A few more I just knocked out. Just want to say thanks everyone for the opportunity to prove my work and for your contin...
10/25/2015

A few more I just knocked out. Just want to say thanks everyone for the opportunity to prove my work and for your continued support.

A couple turbo housings done for a customer in Mo. That should keep the Temps down a little for him!
05/21/2015

A couple turbo housings done for a customer in Mo. That should keep the Temps down a little for him!

1911 done in o.d. green!
01/22/2015

1911 done in o.d. green!

A few handmade knives coated for a customer.
01/21/2015

A few handmade knives coated for a customer.

01/01/2015

Happy new year everyone! Thank you for your business in 2014! Can't wait to see what 2015 has in store!

Address

Arkoma, OK
74901

Telephone

+14794596422

Website

Alerts

Be the first to know and let us send you an email when Wilson Performance and Coatings posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category