01/06/2026
Your 2026 Dirt Track Driveshaft Health Check! If you have any questions about your driveshaft Trevor is the best in the business.
The Checklist Content
1. The "Every Wash" Quick-Check
Mud Clearance: Scrape all dried clay/rubber from the shaft and yokes. (Weight imbalance = Vibration).
Visual Scan: Check for "rock dings" or tube scoring. A single dent is a failure point under torque.
Phase Alignment: Verify yokes are perfectly in line. Misalignment destroys trans seals.
2. Weekly Maintenance Checks
Inspect U-Joints: Check for any looseness or excessive play in the universal joints.
Lubrication: Ensure all grease fittings are properly lubricated with high-temperature grease, and remove any excess.
Slip Yoke Functionality: Verify that the slip yoke moves freely and is adequately greased.
3. Critical Safety Inspections
Driveshaft Loop: Confirm that the driveshaft safety loop bolts are securely tightened.
Fastener Security: Check the torque of all driveshaft strap bolts.
Seal Condition: Inspect for any signs of oil leakage at the transmission or differential seals.
Important Maintenance Considerations
Regular Replacement: Consider replacing U-joints after a certain number of race laps or hours of use, even if they appear in good condition.
Proper Length: Ensure the driveshaft is the correct length to prevent damage to the transmission or differential during suspension travel.
Send a message to learn more
