Chicken Creek Customs

Chicken Creek Customs Welcome to Chicken Creek Customs. We build what we like. And sometimes that build is something you like, too. WHY DOES IT COST SO MUCH? And thats just a sample.

Reach out if you want to buy a bike, or need a custom International built for you. It often comes up that building a Gentleman's or Gentlewoman's transport can be quite expensive, and you're right. But if you want to build something old that lasts as long as something new, here's an example of the work that goes into a modern classic:
-Full disassembly for blasting/cleaning
-Full engine service

-Seals
-Gaskets
-Cylinders honed
-New Pistons, rings and clips/pins
-All moving parts are checked for wear tolerance
-Any part below the middle of wear tolerance range replaced
-Cleaned, painted/cleared
-All seals are replaced
-(Motorcycle) rims are cored and new bearings and seals installed
-Frame is checked and welded or modified for future design
-New bearings are installed
-New suspension bearings
-All parts are either powder coated or paint-matched, based on chosen design
-Tanks are cleaned, resealed and custom painted
-New tires are added
-New brake upgrades, or replacements installed in front and back
-Electrical is completely new, including stator, regulators, and new technologies are added like blue-tooth remote start. Our goal is to create a modern classic that will outlive any vehicle purchased today.

Meanwhile, back in the garage, we've been quietly working away on the 70 International Scout 800, affectionately referre...
03/16/2026

Meanwhile, back in the garage, we've been quietly working away on the 70 International Scout 800, affectionately referred to as Limon. More to follow...

Bullitt Boy is up for sale. Check out the video below to learn more!
12/07/2025

Bullitt Boy is up for sale. Check out the video below to learn more!

This is a custom 1982 Honda CM450A we're currently putting up for sale. While its an older show-bike build, its still a great around-town bike for anyone loo...

If you're looking for a project, we're looking to make room! Pick up this 83 Honda CM450A with brand new everything, and...
10/21/2025

If you're looking for a project, we're looking to make room! Pick up this 83 Honda CM450A with brand new everything, and we'll throw in two crates of CM parts! We said we were making room in the shop, so yeah, even parts have to go. PM/IM if you're interested. CM450A is going for 3200. More than 5K in it with engine rebuild and all new parts throughout, including Moto gadget mUnit Blue.

Are you looking for a great starter bike? We have to let this 1983 Honda CM450A go. Engine was resealed, top end rebuilt...
10/06/2025

Are you looking for a great starter bike? We have to let this 1983 Honda CM450A go. Engine was resealed, top end rebuilt, all seals changed, front shocks rebuilt, new rears, new Kenda tires, rims powder coated, stator rewired, and much more. The best part is it's already got a Motogadget mUnit Blue in it, wired and fires up. Needs a couple small things to complete it: Seat completed, carb balancing, larger petcock for tank, and gear shifter—that's about it. Has about 6K in it, asking $3200 firm. Reach out if interested.

08/27/2024

Its taken a while to get this engine built, but well worth the wait. This will power the 1954 International R110 Pickup, affectionately known as Lock Jaw. We ended in the mid 400s for horsepower and torque. The new Holley system is awesome.

With Born Free motorcycle show – Chicken Creek Customs just got recognized as one of their top fans! 🎉
07/06/2024

With Born Free motorcycle show – Chicken Creek Customs just got recognized as one of their top fans! 🎉

SOLD: The 1984 Jeep CJ7—affectionately known as Black Mamba. This is a really unique restomod in that its done with an a...
03/25/2024

SOLD: The 1984 Jeep CJ7—affectionately known as Black Mamba. This is a really unique restomod in that its done with an all AMC drive line. It starts with a built AMC 401 using a COMP Cam Magnum hydraulic cam and flat tappet lifters, mated to the four-speed T-177 transmission, tied to the Dana 300 transfer case, driving to the one-year-only, solid axle Dana 44 wide-track rear end. This was a fun build and you can see more on the website. Just go to https://chickencreekcustoms.com/home-2/builds/black-mamba-the-1984-jeep-cj7/

The   BMW K75 has its frame back, swapped front end for a set from a Suzuki GSX and its all coming together! Stay tuned ...
01/23/2024

The BMW K75 has its frame back, swapped front end for a set from a Suzuki GSX and its all coming together! Stay tuned for more...

Progress report: The   BMW K75Engine is painted and assembled while the seat design begins taking shape. Stay tuned as w...
01/10/2024

Progress report: The BMW K75
Engine is painted and assembled while the seat design begins taking shape. Stay tuned as we complete the frame work and it starts to look like a bike again!

Progress report:   BMW K75Parts replaced, leak tested, reassembling, and frame modifications complete. Follow us to get ...
01/03/2024

Progress report: BMW K75
Parts replaced, leak tested, reassembling, and frame modifications complete. Follow us to get next weeks update as we begin paint and assembly!

Address

Alpharetta, GA
30004

Alerts

Be the first to know and let us send you an email when Chicken Creek Customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Chicken Creek Customs:

Share