Pesl Distributor of Swepco Specialty Lubricants

04/04/2025

27/03/2025

Swepco Lubricants Call Us @ 799-9002

02/08/2024

Testimony From Customers Who Used Swepco Lubricants In Trinidad & Tobago

From: "John Wick"
Subject: John Wick Racing Proposal

Good morning Sir,

As per telephone discussion, I am pleased to inform you of our satisfaction with your company's engine oil product, having tested its ability to withstand our performance standards. We were able to run our boat in very rough water conditions, pushing the engine through extreme stress, which it responded well, with very low emissions, stayed within a comfortable operating temperature, accelerated and idled smoothly.
We would like to thank you for allowing us to test your product and revert with our review.

Best Regards
Nicholai Assam
Throttleman
Team John Wick

Call now to connect with business.

02/08/2024

Testimony From Customers Who Used Swepco Lubricants In Trinidad & Tobago

From: "trevor sun"
Sent: Tue, Apr 10, 2018 at 10:09 AM
Subject: Endorsement of Swepco TCW-3 2-stroke engine oil
I use SWEPCO TCW-3 2-stroke engine on my Mercury 250efi racing engine and have observed less smoke from the exhaust, less spark plug residue, and a drop in high rpm engine temperature of around 10 degrees F as compared to previous oils used.

Trevor Sun (Powerboat Racer, Racing Outboard builder)

02/08/2024

Testimony From Customers Who Used Swepco Lubricants In Trinidad & Tobago

On Tue, 30 Jul 2024 at 7:38 pm, Dennis Jonathan
wrote:
To Swepco, within this email, you will find my honest feedback regarding the oil test done on 2×135hp Honda fourstokes at Jeff Outboard Services.
The test was done on 2007 Honda Outboards. We used tcw3 15w 40 as the age of the engines as we would like to see if a thicker body oil made a difference in tik noises when the engine is cold/has a cold start on mornings. Those engines have a timing chain that makes noise when the engine first starts or is parked up for a couple of hours. Firstly, with swepco's oil, we've noticed less noise from the timing chain and also a smoother idle. When oils have been drained, we also notice the body of the oil stood up much better to other oils. The oil filter looked good and did not feel heavy or sluggish. I would recommend this oil to customers with new and used fourstroke outboards. Approved

15/11/2023

Pesl Distributor of Swepco Specialty Lubricants
SWEPCO 123 ULTRA EP MULTI-SERVICE GREASE IS A PREMIUM HIGH PRESSURE GUN GREASE.
Advanced overbased complex calcium sulfonate gelling chemistry
Delivers exceptional EP characteristics without the addition of other additives
Superior heat and wear resistance
High loading or pressures resistance
Protects metal surfaces from damaging metal to metal contact
Excellent water and corrosion resistance
Inherently high dropping point of 580°F (300°C)

07/11/2023

SWEPCO 801 Clear Penetrating Lubricant is a premium quality penetrating oil and lubricant. Use it for loosening frozen and
corroded bolts, nuts, screws, clamps and other threaded parts.

Convenient aerosol – spray any way – even straight up
Penetrates, loosens and dissolves rust, corrosion, paint, dirt, dope, grease
Loosens frozen/corroded parts fast with less wait time
Helps protect against future rust and corrosion
Clear formula makes clean-up easier
Works as a protective lubricant too
Perfect for screws, nuts, bolts, allen screws, chains, pins, hinges, clamps and threaded parts of all kinds

07/11/2023

A Premium Quality, Non-Melt, Multi-Purpose Grease Made With Technical Fine Grade Powdered Moly for Unexcelled Control of Wear, Friction & Heat.

SWEPCO 101 Moly Grease represents the “state of the art” in grease technology, combining superior base stocks and gelling agent with the proven performance of powdered moly and other highly effective additives.

friction reduction
heat and wear control
high heat and oxidation resistance
cold temperature performance
service life and lubrication cost control
Non-melt grease that will not melt at any temperature
Contains the technical fine grade Molybdenum Disulfide (Moly Powder)
Optimum performance range is -30°F to 500°F (-34°C to 260°C)
Withstands up to 500,000 pounds per square inch of pressure
Contains SWEPCO’s proprietary anti-friction and anti-wear additive, LUBIUM

07/11/2023

SWEPCO 201 MULTI-PURPOSE GEAR L**E
Superior Extreme Pressure Performance
Resists Shock Loading & Wear
High Performance Adhesive/Cohesive Additive Prevents Cold Start Wear ( Great For Maxi Taxi)

Exceeds military specifications MIL-PRF-2105E
Oxidation, rust and corrosion inhibitors
Anti-catalyst and anti-foam inhibitor
Anti-wear inhibitors and extreme pressure (EP) additive
Adhesive/cohesive characteristics for climbing action
Pour point depressant
Limited slip characteristics

07/11/2023

Pesl Distributor of Swepco Specialty Lubricants Interested in retailing SWEPCO give us a call today 740-7010