What are the opening hours?

Monday 8:30am - 5:30pm Tuesday 8:30am - 5:30pm Wednesday 8:30am - 5:30pm Thursday 8:30am - 5:30pm Friday 8:30am - 5:30pm Saturday 8:30am - 5:30pm

Flamingo Car Care Philippines - Authorized Distributor

Home
Philippines
Quezon City
Flamingo Car Care Philippines - Authorized Distributor

Authorized Distributor in the Philippines

19/06/2026

❗Flamingo Car Care Philippines - Authorized Distributor🦩 ❗

Flamingo Helmet Disinfecting Foam is a fast-acting, deep-cleaning aerosol foam engineered to sanitize, deodorize, and refresh the inner fabric linings of motorcycle helmets, racing helmets, and protective gear. It lifts away sweat, hair oil, and bacteria without requiring you to completely remove the interior padding.

Step-by-Step Instructions
Prep the Helmet: Pop open your helmet's visor completely or remove it entirely to give yourself full, unrestricted access to the interior padding.

Shake Well: Shake the aerosol can vigorously for 10 to 15 seconds to ensure the active sanitizing agents and foaming properties are fully blended.

Apply the Foam: Hold the can upside down and spray a generous, even layer of foam directly onto all the fabric linings inside the helmet (the cheek pads, brow pad, and neck roll). Let the rich foam fill the interior cavity.

Let it Dwell (1–2 Minutes): Allow the expanding foam to sit undisturbed. As it bubbles, it actively breaks down trapped body oils, releases embedded dirt, and neutralizes odor-causing bacteria deep within the foam padding.

Wipe and Agitate: Take a clean, dry microfiber towel and firmly wipe down the interior fabric. Press into the pads to lift away the collapsed foam along with the loosened dirt and grime. For stubborn stains, give the fabric a gentle scrub with the towel.

Air Dry Fully: Set the helmet in a well-ventilated, shaded area to air dry completely before wearing it.

18/06/2026

❗Flamingo Car Care Philippines - Authorized Distributor🦩 ❗

Flamingo Wheel Cleaner is a heavy-duty, fast-acting spray cleaner formulated to rapidly dissolve stubborn brake dust, road grime, tar, and oily grease from automotive wheels and rims. Its acid-free formula cleans deeply without damaging your wheels, clear coats, or braking components.

Step-by-Step Instructions
Ensure Wheels are Cool: Never spray the cleaner onto hot wheels or immediately after driving. Let the rims and braking components cool completely down to prevent the chemical from drying prematurely, which can cause spotting or streaking.

Wash One Wheel at a Time: Focus on one wheel assembly completely from start to finish before moving to the next. This ensures the cleaner never sits on the surface for too long.

Spray Thoroughly: Shake the bottle well. Spray a generous, uniform layer of Flamingo Wheel Cleaner over the entire rim, ensuring you coat the spokes, face, inner barrel, and brake calipers.

Let it Dwell (30–60 Seconds): Allow the active formula to sit and pe*****te the stubborn grime. You will see the cleaner loosen and lift the dark brake dust. Do not let the product dry completely on the wheel.

Agitate with a Brush: For heavily caked-on brake dust, use a soft-bristled wheel brush or a dedicated microfiber wheel mitt to scrub between the spokes, around the lug nuts, and deep inside the wheel barrel.

Rinse Completely: Thoroughly blast the wheel, tire, and brake assembly with a sharp stream of water from a hose or a pressure washer to completely flush away all chemical residues and loosened dirt.

17/06/2026

❗Flamingo Car Care Philippines - Authorized Distributor🦩 ❗

Flamingo Wash & Wax is a premium, dual-action car shampoo engineered to cut through heavy road grime, dust, and bird droppings while simultaneously depositing a thin, protective layer of high-gloss carnauba wax to enhance shine and water-beading in one easy step.

Step-by-Step Instructions
Park in the Shade: Always wash your vehicle out of direct sunlight on a surface that is cool to the touch. This prevents the shampoo and wax conditioners from drying prematurely, which leaves stubborn water spots or streaks.

Pre-Rinse: Thoroughly spray the entire vehicle with a hose or pressure washer from the top down. This flushes away loose mud, sand, and gritty debris that could accidentally scratch your clear coat during the hand wash.

Mix the Solution (Two-Bucket Method Recommended):

Bucket 1 (Soap): Add 2 to 3 capfuls of Flamingo Wash & Wax into a clean bucket, then blast it with a sharp stream of water to activate a rich, thick, wax-infused suds blanket.

Bucket 2 (Rinse): Fill a separate bucket with plain, clean water.

Wash from Top to Bottom: Dip a clean microfiber wash mitt into the soapy bucket. Wash the vehicle in sections, starting from the cleanest upper panels (roof, hood, trunk) and working down to the dirtier lower panels. Wipe gently using straight, overlapping lines rather than circular motions to avoid swirl marks.

Rinse the Mitt Frequently: After washing a panel, dunk your mitt into Bucket 2 (Rinse) to release trapped dirt before dipping it back into Bucket 1 for fresh soap and wax suds.

Final Rinse & Dry (Crucial for Shine): Thoroughly rinse the vehicle from the top down to wash away all remaining soap. Immediately dry the car using a clean, plush microfiber drying towel. The drying process is what cures the premium gloss conditioners and reveals a deep, streak-free, mirror-like wax shine.

16/06/2026

❗Flamingo Car Care Philippines - Authorized Distributor🦩 ❗

Flamingo Car Wash Shampoo (F006) is a highly concentrated, pH-balanced, high-foaming soap engineered to lift away road grime, bird droppings, and dust while protecting your vehicle’s existing wax or ceramic coating. It dries completely residue-free, ensuring a brilliant, streak-free shine.

Step-by-Step Instructions
Park in the Shade: Always wash your vehicle out of direct sunlight on surfaces that are cool to the touch. This prevents the shampoo from drying prematurely on the paint, which causes hard water spots.

Pre-Rinse: Blast the entire vehicle with a hose or pressure washer from top to bottom. This removes loose dirt, sand, and gritty debris that could scratch the clear coat during the hand wash.

Mix the Shampoo (Two-Bucket Method Recommended):

Bucket 1 (Soap): Pour 2 to 3 capfuls of Flamingo Car Wash Shampoo into a clean bucket, then blast it with sharp water pressure to generate a thick, rich blanket of suds.

Bucket 2 (Rinse): Fill a separate bucket with plain, clean water to rinse your wash mitt.

Wash from Top to Bottom: Dip a clean microfiber wash mitt into the soapy bucket and wash the vehicle in sections, starting from the roof, hood, and trunk, and working down to the lower, dirtier panels. Wipe using straight, overlapping lines rather than circles to prevent swirl marks.

Rinse the Mitt Frequently: After wiping each panel, dunk your mitt into Bucket 2 (Rinse) to release trapped dirt before gathering more fresh soap from Bucket 1.

Final Rinse & Dry: Thoroughly rinse the shampoo off the car from the top down. Immediately dry the vehicle using a clean, plush microfiber drying towel to prevent water spots and reveal a deep, streak-free gloss.

14/06/2026

❗Flamingo Car Care Philippines - Authorized Distributor🦩 ❗
The Flamingo CVT/FI Throttle Body Cleaner! 🦩⚡

Specially engineered for modern fuel-injected (FI) engines and CVT scooter intake systems, this professional-grade formula instantly dissolves sticky varnish, heavy carbon deposits, and oily sludge from your throttle valves, idle air control valves, and throttle bodies. No tedious scrubbing required—just heavy-duty cleaning power that brings back a perfectly smooth idle and immediate acceleration.

The countdown to a smoother ride begins now. Stay tuned for the official drop!

13/06/2026

❗Flamingo Car Care Philippines - Authorized Distributor🦩 ❗
Thick foam, deep clean, and that signature Flamingo shine. 🦩✨

12/06/2026

Malaya mula sa takot, malaya para sa pag-asa. May pagmamahal sa Diyos at sa bayan. Happy Independence Day! 🙏❤️

11/06/2026

❗Flamingo Car Care Philippines - Authorized Distributor🦩 ❗

Flamingo Headlight Restorer (F131) is a specialized, compound-based formula designed to chemically dissolve oxidized, yellowed plastic and fine scratches from cloudy polycarbonate headlight lenses, restoring optical clarity without requiring heavy sanding.

Step-by-Step Instructions
Wash and Dry (Crucial Step): Thoroughly wash the headlights with car soap and water to remove surface dirt, grit, and bugs, then dry them completely.

Mask the Paint: Apply automotive masking tape (painter's tape) to the painted metal and plastic bumper edges surrounding the headlight lens. This protects your vehicle's paintwork from accidental contact with the abrasive compound.

Shake and Apply: Shake the bottle vigorously. Pour a small, nickel-sized amount of the restorer directly onto a clean, firm microfiber cloth or a dedicated foam applicator pad.

Scrub with Firm Pressure: Buff the headlight lens firmly using back-and-forth, linear motions (horizontal or vertical). Avoid rubbing in circles, as circular motions can create tiny swirl marks that scatter light. Work on one section of the lens at a time, adding more product if the cloth dries out.

Wipe Clean Immediately: Before the compound has a chance to dry completely on the lens, use a separate, clean, dry microfiber towel to wipe away the hazy residue and loosened oxidation.

Inspect and Repeat: Inspect the lens. For severely neglected, heavily yellowed headlights, repeat the process a second or third time until the plastic is crystal clear.

10/06/2026

❗Flamingo Car Care Philippines - Authorized Distributor🦩 ❗

Flamingo Dash and Glass Interior Detailer (F319) is a fast-acting, 2-in-1 maintenance formula specifically engineered to safely clean and protect both hard interior electronics/dashboards and clear glass surfaces simultaneously without leaving behind greasy residues or cloudy streaks.

Step-by-Step Instructions
Park in the Shade: Always use the detailer when the vehicle's interior surfaces are cool to the touch. If the dashboard or windshield is hot from sitting under the sun, the cleaner will evaporate too quickly, causing product smudges.

Shake Well: Vigorously shake the bottle before use to fully activate the cleaning polymers and UV-blocking agents.

Control Your Spray (The Towel Trick): * For Glass and Touchscreens: Spray the product directly onto a clean, low-pile microfiber towel rather than misting it onto the surface. This prevents over-spray from drifting onto areas you aren't cleaning.

For Dashboards and Plastics: Mist the product lightly and evenly directly across the vinyl or plastic panels.

Wipe Clean: Using your microfiber cloth, wipe down the surface in a structured grid pattern to lift dust, fingerprint oils, and light smudges away.

Buff to a Matte Finish: Immediately flip your microfiber towel to a completely fresh, dry side (or use a second, dry microfiber cloth) and give the surface a quick, light buff. This flashes off any remaining moisture, leaving glass crystal-clear and giving plastics a clean, factory-satin look with zero oily glare.

Address

Banawe
Quezon City
1114

Opening Hours

Monday	8:30am - 5:30pm
Tuesday	8:30am - 5:30pm
Wednesday	8:30am - 5:30pm
Thursday	8:30am - 5:30pm
Friday	8:30am - 5:30pm
Saturday	8:30am - 5:30pm

Website

http://Flamingocarcareph.com/

Alerts

Be the first to know and let us send you an email when Flamingo Car Care Philippines - Authorized Distributor posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Autos & Automotive Service in Quezon City?