Sticky Autoworx

Call Directions Website

Sticky Autoworx Sticky Autoworx β€” Custom fabrication, performance mods & full builds done right. Steel, stainless, aluminum, titanium, we craft precision, power & perfection.

Built by hand for drivers who demand more. Taupō, NZ. πŸ”§πŸ”₯

06/10/2026

Take a look at our DIY Chassis Notch Kit being assembled and welded together by our customer π™Žπ™π™π™π™Ž ! πŸ‘ŒπŸ”₯

Zak smashed this out over 2 days:

πŸ›  Tray off
πŸ“ Measure it up
🧹 Prep & clean
πŸ”₯ Weld
βš™οΈ Cut
🧹 Clean
πŸ”₯ Weld again
πŸ“ Measure again
βœ‚οΈ Cut the tub
πŸ”© Assemble it all back together!

That’s exactly why we designed these kits β€” to take the guesswork out of building a chassis notch from scratch while still leaving the fabrication and final fit-up in your hands.

Find them on our website!

Made right here in NZ πŸ‡³πŸ‡Ώ

Want to go lower? We can also custom make larger notch kits to suit your build.

Not keen on doing it yourself? We also offer a full drive-in, drive-out service and can organise LVVTA certification.

Built tough, built right β€” The Sticky way. πŸ€™

Introducing our new Sticky Autoworx 4" Chassis Notch Kit! πŸ‡³πŸ‡ΏDesigned and made right here in NZ from 4mm steel, these kit...
05/10/2026

Introducing our new Sticky Autoworx 4" Chassis Notch Kit! πŸ‡³πŸ‡Ώ

Designed and made right here in NZ from 4mm steel, these kits come ready to assemble and weld in. Nice and simple, with everything you need to get the job done.

Need more than a 4" notch? No worries β€” we can custom make larger drop kits to suit your build.

Rather leave it to us? We also offer a drive-in, drive-out service where we can fit the notch and organise the LVV certification for you.

Available now on our website πŸ‘‡
www.stickyautoworx.co.nz

Built tough, built right – The Sticky way. πŸ”§

🚨 NEW SERVICE – VEHICLE TUNING! 🚨We're excited to announce that Sticky Autoworx now offers vehicle tuning using Alientec...
28/09/2026

🚨 NEW SERVICE – VEHICLE TUNING! 🚨

We're excited to announce that Sticky Autoworx now offers vehicle tuning using Alientech, with Alt Tune as our trusted tuning partner!

Whether you're chasing more power, better drivability or improved fuel economy, we've got you covered.

πŸ”§ What can tuning do for your vehicle?

βœ… Increased power & torque
βœ… Improved throttle response
βœ… Smoother drivability
βœ… Improved fuel efficiency
βœ… Custom tuning solutions to suit your vehicle

From daily drivers and work utes to modified performance vehicles, we can help you get more out of your setup.

πŸ’° TUNING STARTING FROM JUST $300 + GST!

Not sure what tuning options are available for your vehicle? Get in touch and we'll discuss what's possible.
πŸ“ž 027 577 8040

🌐 www.stickyautoworx.co.nz
πŸ“ Sticky Autoworx – Taupō, NZ

Built tough. Built right. The Sticky Way.

πŸ”₯ FOLLOW. LIKE. SHOP. SAVE! πŸ”₯We appreciate every single one of you who follows our journey, supports our business and ke...
22/09/2026

πŸ”₯ FOLLOW. LIKE. SHOP. SAVE! πŸ”₯

We appreciate every single one of you who follows our journey, supports our business and keeps us doing what we love!

As a little THANK YOU to our awesome Facebook and Instagram followers, we're giving you 5% OFF your next order! 🀘

Whether you're chasing parts for your next build, fabrication supplies, or just need a few bits and pieces to get that project finished, we've got you covered!

πŸ›’ Shop our full range online at www.stickyautoworx.co.nz

πŸ’₯ Use code SOCIAL5 at checkout to receive 5% OFF your order!

Every order supports our small, Kiwi-owned business and helps us keep bringing you quality products, custom fabrication and plenty more cool builds!

Thanks for being part of the Sticky crew! πŸ‘Š

Built tough, built right – The Sticky Way!

πŸ”₯ NEW PRODUCT β€” RC COLORADO 4” STAINLESS SNORKEL πŸ”₯Our new Sticky 4” Stainless Snorkel to suit the RC Holden Colorado is ...
14/09/2026

πŸ”₯ NEW PRODUCT β€” RC COLORADO 4” STAINLESS SNORKEL πŸ”₯

Our new Sticky 4” Stainless Snorkel to suit the RC Holden Colorado is here! 🀌

Big 4” stainless. Tough styling. Great airflow. But making a stainless pipe look good running up the side of a guard is the easy part...

The magic happens underneath the guard. πŸ‘€
That’s where the Sticky Way really comes into it.
We’ve put the time into designing the under-guard section properly β€” focusing on fitment, routing and airflow rather than taking shortcuts just to make it β€œeasy”.

Because what you can’t see is just as important as what you can.

πŸ”§ DIY installation friendly
πŸ› οΈ Professional installation available
πŸ’¨ 4” stainless construction
πŸ‡³πŸ‡Ώ Designed & fabricated right here at Sticky Autoworx

πŸ“¦ Can be used with the factory airbox or paired with one of our Sticky Snorkel Boxes
Available to order now through our website.

Got an RC Colorado and want us to fit the complete setup? Send us a message and we’ll get you sorted.

Built tough. Built right. The Sticky Way.

Very proud to receive feedback like this! My team did a great job in a short time and Carl was clearly very happy with h...
01/07/2026

Very proud to receive feedback like this! My team did a great job in a short time and Carl was clearly very happy with how everything turned out!

Ontop of that Carl and his partner and co driver Lynsey finished 5th in their first series, super proud of them and happy to be apart of the journey!

Johan's Chevy C10 chassis is looking super sharp. 🀌We're getting close now. The chassis is almost finished, with all the...
01/07/2026

Johan's Chevy C10 chassis is looking super sharp. 🀌

We're getting close now. The chassis is almost finished, with all the major fabrication wrapped up and ready to receive the body for the final time. A bit of plumbing and a few last tidy-up jobs, then it's time to drop the cab back on.

What started out as a simple LS swap quickly turned into, "this thing has to sit on its ass." From there, the classic "while we're at it" snowball took over. Every nut, bush and bolt has been replaced or upgraded, meaning this C10 is going to feel like a brand-new truck underneath.

She's going to be low. She's going to be loud. She's going to turn heads everywhere she goes.

Built right. Built tough. The Sticky Way. πŸ‘Š

Finally sinking our teeth into this VF Valiant.The mission?Take an already tough old girl and make it downright disrespe...
10/06/2026

Finally sinking our teeth into this VF Valiant.

The mission?

Take an already tough old girl and make it downright disrespectful. We're starting at the ass end, chasing the sort of fitment that gives enthusiasts a chub and has purists reaching for the keyboard.

Then there's the engine.

Let's just say it's got enough attitude to turn that chub into a hardon before the tyres have even done a full rotation.

Tough stance. Tough engine. Zero intention of being sensible.

Stay tuned. This one's going to get a little out of hand.

26/05/2026

Fresh stock just landed on the website πŸ‘Š

We’ve been busy adding a heap of new products including mild steel & stainless steel turbo downpipe flanges, turbine flanges, and manifold flanges πŸ”₯

Built for fabricators, tuners, and anyone who’s sick of wasting time with poor fitting parts. More options, more sizes, and more products being added regularly.

Check out the latest additions πŸ‘‡

stickyautoworx.co.nz⁠

Built tough, built right – The Sticky way πŸ‘Š

LVVTA CERTIFICATION DAY IS BACK πŸ‘ŠGot a project that needs certifying?We’ve locked in another LVVTA Certification Day at ...
13/05/2026

LVVTA CERTIFICATION DAY IS BACK πŸ‘Š

Got a project that needs certifying?

We’ve locked in another LVVTA Certification Day at Sticky Autoworx on Friday 29th May.

Whether it’s suspension, chassis mods, engine conversions, airbags, brake upgrades, steering mods or a full custom build β€” now’s the time to get your ride legal and back on the road.

βœ” Avoid costly fines & rego issues
βœ” Increase safety & peace of mind
βœ” Add value to your build
βœ” Support Kiwi car culture

Spots are limited and these days fill up fast.

πŸ“ Sticky Autoworx
28 Manuka Street, Taupo

πŸ“ž Message us now to book your cert inspection.

Built tough, built right – The Sticky way πŸ‘Š

Address

28 Manuka Street
Taupo
3378

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm

Telephone

+64275778040

Website

Alerts

Be the first to know and let us send you an email when Sticky Autoworx posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category