Mills-Tui

05/10/2026

Here’s one of our Medium Water Tankers built for Timaru

27/09/2026

Another tough Mills-Tui steel tipper ready to go.

This 6.3 metre steel tipping body has been built for CAL Isuzu and fitted to this Isuzu 8x4.

Built for hard work, the body features:

• Hardox HX500 wear steel construction
• Edbro tipping hoist
• Rockinger tow coupling
• Peterson LED lighting
• Roadrunner hydraulic tank
• Two-way taildoor for added versatility
• Body lock and Tiger Hook tie downs in bin

The body is manufactured using our Lincoln Electric Rapid Arc welding process, giving us exceptional weld quality, consistency and finish while maintaining the strength these bodies are built for.

A solid, practical setup built right here in Rotorua for New Zealand conditions.

Need a steel tipper body built for your operation? Talk to the Mills-Tui team.

☎ 0800 MILLS-TUI
🤳027 289 0300 Garth Paton

15/09/2026

Big cube. Hardox. Built to work.

Another serious scrap-metal unit out of the Mills-Tui workshop, this high-cube steel truck and trailer unit has been manufactured for Symons Group in New Plymouth.

Designed for high-volume scrap and recycling work, the build features:

🔹 High-cube bodies manufactured from Hardox HX500 wear plate
🔹 Strenx high-tensile steel trailer chassis
🔹 PowerTarps full wet-weather electric retractable tarp system
🔹 High-lift, air-operated taildoors for maximum discharge clearance
🔹 Edbro tipping rams
🔹 Roadrunner hydraulic tank
🔹 SAF disc brake axles
🔹 WABCO EBS braking
🔹 Heavy-duty construction throughout for demanding scrap-metal work

Hardox HX500 gives these bodies the wear resistance needed for abrasive loads while allowing us to keep unnecessary weight out of the build — putting the steel where it needs to be.

A great-looking combination and another purpose-built Mills-Tui unit ready to earn its keep. Thanks to the team at Symon's Group for once again choosing Mills-Tui.

Need a high-cube scrap, recycling or bulk transport solution? Talk to us.

☎ 0800 MILLS-TUI
🤳027 289 0300 Garth Paton

28/08/2026

27/08/2026

💪 BUILT TO SHIFT ROCK 💪

Fresh out of the Mills-Tui workshop for HES Earthmoving — this new 4-axle steel bathtub ejector trailer has been built specifically for the tough stuff.

Designed as a rock-spec body, it features a seriously heavy-duty Hardox wear package, 5mm side sections and a 6mm floor, heavy duty rear posts giving it the strength and abrasion resistance needed for hard, demanding loads.

Instead of tipping, the ejector system uses a heavy-duty double-acting Delta ram to drive the moving sled through the body, pushing the load out the rear. That means controlled unloading without needing to raise the bin — a big advantage when working on uneven ground or where overhead clearance is limited.

Other features include:

⚙️ 7.4m steel bathtub body
💪 Heavy-duty Hardox rock body
➡️ Moving ejector sled with Hardox wear face
🔩 Heavy-duty double-acting Delta ram
🛞 Hendrickson INTRAAX disc brake suspension
🛑 Knorr-Bremse EBS braking system
🧴 Strenx hi-tensile Low Rider chassis
✨ Mills-Tui polished alloy wheels
🟢 Finished in HES green and silver

A tough bit of gear built for a tough application — and another ejector trailer ready to earn its keep. Thanks to the team at Transport Hydraulic Solutions, Real Steel and HES Earthmoving for their collaboration on this build.

Built in Rotorua. Built by Mills-Tui. Built for the job.

Are you interested in finding out more about Mills-Tui Ejector Trailers? ☎️📞 Call us now on 0800 MILLS-TUI (645 578) ☎️📞

27/08/2026

🔥 SPECIAL PRICE – ONE ONLY! 🔥

Mills-Tui ‘Two Simple’ 2-Axle Steel Bathtub Tipping Trailer

$105,000 + GST – INCLUDING ALLOY WHEELS

We’ve got one Two Simple trailer in build now at this special price, and we’re throwing in the alloy wheels at no extra cost!

Designed to deliver the proven Mills-Tui strength and build quality in a simple, competitive package, the Two Simple comes in at an impressive 4,000kg tare weight.

✅ 4.3m Hardox® steel bathtub – 4mm floor and sides
✅ Mills-Tui Diamond Strength one-piece top coaming rail
✅ Ground-operated two-way double swing taildoor
✅ 20-ton underbody hoist with chrome stages - no hoist cage to avoid hang ups
✅ Hendrickson 22.5” disc brake axles & air suspension
✅ Knorr-Bremse EBS braking system
✅ Alloy wheels INCLUDED at this price
✅ WIKA air suspension weight gauge
✅ Resene Nason 2K paint finish
✅ On-road costs included
✅ Free first service

A strong, lightweight and straightforward tipping trailer that’s built to work — the best spec without the big price tag.

ONE ONLY IN BUILD NOW – $105,000 + GST

📞 Call 0800 MILLS-TUI (845 578) today to secure it.

Mills-Tui – Built tough. Built to work.

24/08/2026

🔥 **BUILT FOR THE UNDERGROUND** 🔥

A little different from the usual fire appliance build for the Mills-Tui team — this one has been designed specifically for OceanaGold and the Waihi Mine Extension Project.

Built on an Iveco Eurocargo 4x4, this appliance had to meet the specialised requirements of an underground mining environment. We worked closely with an Australian mine rescue consultant to develop a unit capable of supporting both fire response and mine rescue operations. Wheelbase length was critical to be able to navigate the tunnels in the mine and Iveco Eurocargo 4x4 ticked the box here.

Some of the key equipment includes:

🚒 **3,000 litre water tank**
🔥 **200 litre foam tank and proportional foam system**
💦 **Gaam MK450 firefighting pump**
🎯 **Tornado front-mounted monitor**, remotely controlled from the cab
🧯 **Twin hose reels** with 30m and 60m hoses
📊 **TankVision monitoring** for both water and foam levels
🚨 Comprehensive Whelan emergency and work lighting package for underground operation
🧰 Six equipment lockers with dedicated storage for **mine rescue gear, SCSR/SCBA/BA equipment and other emergency response equipment**

There’s been plenty of engineering, plumbing, electrical work and detail involved in bringing this one together — and a fair bit of learning for our team along the way as we adapted our fire appliance experience to the underground mining environment.

A seriously capable piece of emergency response equipment, and another great example of what can be achieved when we get the opportunity to engineer something a little outside the ordinary.

**Built in Rotorua. Built by Mills-Tui. Built for the job.** 🔥🚒

With a dedicated team of expert designers and fabricators, give 0800 MILLS-TUI (645 578) a call for your next build.

24/08/2026

New chassis underway…what’s it going to be??

24/08/2026

🚛🔧 MILLS-TUI PARTS – NOW ONLINE! 🔧🚛

Need trailer parts without the hassle? You can now shop the Mills-Tui online parts webstore anytime, from anywhere in New Zealand.

We stock a growing range of genuine Mills-Tui trailer parts and quality components from leading industry brands — all backed by the knowledge and experience of the Mills-Tui team.

✅ Genuine Mills-Tui parts
✅ Trusted leading brands
✅ Easy online ordering
✅ Fast nationwide delivery
✅ More products being added regularly
✅ Credit cards accepted

Whether you’re carrying out routine maintenance, replacing worn components or need parts to keep your gear on the road, take a look through the range.

👉 Shop online today: mills-tui.co.nz/shop/

Can’t find what you need? Give our Parts team a call on 0800 MILLS-TUI (645 578) or 027 PARTS NZ (727 8769) and we’ll help track it down.