Kapiti Vapour Blasting

Kapiti Vapour Blasting Helping people restore and clean automotive parts through ultrasonic and vapour blasting to restore the surface of components to as factory.......

Vapour blasting used in conjunction with ultrasonic cleaning helps maintain the highest standards of engineering when dealing with high performance and collectable vehicles.

“I like to clean, I like cars. Most of the cars I have owned have been VW’s of one kind or another but really I just really like cars. And I like being an instrumental part of a successful restoration project. You’re welcome

to sound me out about your bike, too.”

Vapour blasting is suitable for most metals such as aluminium, bronze, magnesium, titanium, brass and copper, the vapour blasting process will gently clean exterior surfaces without damage and leave a factory type satin finish, which is very easy to keep clean. Ferrous metals can be cleaned this way but need to be treated afterwards to stop flash rusting.

A gearbox in for a refresh......
02/09/2026

A gearbox in for a refresh......

A bunch of wheels in to clean up, these were blasted and then off to get the lips polished and or machined then paint......
31/08/2026

A bunch of wheels in to clean up, these were blasted and then off to get the lips polished and or machined then paint......

a nice little job, well the last part to finish the engine was found and in for a clean to match the rest of the engine....
26/08/2026

a nice little job, well the last part to finish the engine was found and in for a clean to match the rest of the engine......

Well it had to happen some time my SD card failed so I have no before images of this Kawasaki 550 engine and parts, they...
24/08/2026

Well it had to happen some time my SD card failed so I have no before images of this Kawasaki 550 engine and parts, they were black but worn and it will all be black again before the rebuild.....

Barrels in for a once over before going off for new nikasil plating......
19/08/2026

Barrels in for a once over before going off for new nikasil plating......

a few parts in to be media blasted to remove paint and some corrosion, so repairs can be started and then on to fresh pa...
17/08/2026

a few parts in to be media blasted to remove paint and some corrosion, so repairs can be started and then on to fresh paint.....

A few smaller motorbike parts from a new project in to remove coatings and tidy up before fresh paint is applied.....
13/08/2026

A few smaller motorbike parts from a new project in to remove coatings and tidy up before fresh paint is applied.....

A small collection of parts in for a clean up before going back to work.....
10/08/2026

A small collection of parts in for a clean up before going back to work.....

A set of vintage VW wheel bolts in for a fresh coat of gold zinc, first degrease then a quick media blast to remove all ...
05/08/2026

A set of vintage VW wheel bolts in for a fresh coat of gold zinc, first degrease then a quick media blast to remove all the years of dirt and corrosion then fresh zinc and then back to work......

motorbike engine and parts in for a clean before it get some tlc and back on the road.....
03/08/2026

motorbike engine and parts in for a clean before it get some tlc and back on the road.....

Address

268 Main Road North
Paraparaumu

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Kapiti Vapour Blasting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Kapiti Vapour Blasting:

Shortcuts

Featured

Share

Category