Dodzo’s - Vapour Blasting and Cerakote finishing.

Dodzo’s - Vapour Blasting and Cerakote finishing. Specialising in Vapour Blasting giving options of finishes on alloy, copper, brass & plastics and steel components.

We are also a Certified Cerakote applicator and it is all done in house. Automotive, Motorcycle, Marine, and restoration specialists.

What we have here is a magnesium engine case set and gearbox cases from a 1954 Volkswagen Kombi.In 1954 these magnesium ...
09/09/2026

What we have here is a magnesium engine case set and gearbox cases from a 1954 Volkswagen Kombi.

In 1954 these magnesium parts would have been coated in a product called Alodine, a corrosion inhibitor that was applied to the exterior.
We were asked if we could replicate the colour in Cerakote.

With no direct colour matching it was time to put some mixology to the test as we were very fortunate to have a spare engine case half that had been sitting in the dark for close on 70 years.
(Shown in the second picture)

We used a number of colours in the Cerakote H series and had a large number of spray outs as there was no formula to work with and the metallics varied in each colour we were mixing.

After quite a few late nights we (Callum and myself) I finally got to spray the result that you see here.

Great to be involved in what will no
doubt be another stunning restoration.

Had in a couple of Honda  NSR 250 cylinders in for a clean up.
09/09/2026

Had in a couple of Honda NSR 250 cylinders in for a clean up.

This week it was time to recolour a set of Vortex (black anodised) handlebars to match a top clamp. All finished in Sati...
09/09/2026

This week it was time to recolour a set of Vortex (black anodised) handlebars to match a top clamp.
All finished in Satin Silver.

Last week we managed to get the 1991 Honda NSR 250 frame and swingarm completed. After removing the anodising we worked ...
31/08/2026

Last week we managed to get the 1991 Honda NSR 250 frame and swingarm completed.

After removing the anodising we worked through several test scenarios to rectify the orbital sanding results a previous owner had left in an effort to polish the frame and swing arm.

We have vapour blasted and applied a finish to replicate the original brushed look on the non casts aluminium parts.

Some photos of the CR250 one of our customers is doing up. The frame, swingarm, wheel hubs, master cylinders, brake call...
31/08/2026

Some photos of the CR250 one of our customers is doing up.

The frame, swingarm, wheel hubs, master cylinders, brake callipers, tripple clamps and the full frame and engine bolt kits have all been vapour blasted.

Bolts and axles are now all away for plating.

Here is some before and after photos of a nice wee Ford Falcon intake we had in for a vapour blast.
31/08/2026

Here is some before and after photos of a nice wee Ford Falcon intake we had in for a vapour blast.

Nice wee Chevrolet 350 intake in for a spruce up while the engine gets a rebuild.
31/08/2026

Nice wee Chevrolet 350 intake in for a spruce up while the engine gets a rebuild.

Some weeks are more exhausting than others, 🙂Suzuki RM80 chamber finished inV series “Jet Black”Ford Prefect headers fin...
31/08/2026

Some weeks are more exhausting than others, 🙂

Suzuki RM80 chamber finished in
V series “Jet Black”

Ford Prefect headers finished in C series “Burnt Bronze”

Mazda Rotary exhaust manifold finished in V series “Jet Black”

We had a Honda CR500 ignition cover in to blast and re-colour to match the new clutch cover.Finished in one of our F ser...
31/08/2026

We had a Honda CR500 ignition cover in to blast and re-colour to match the new clutch cover.
Finished in one of our F series blacks.

How does this Porsche 911 magnesium transmission look? We finished it in H series “Sniper Grey”
31/08/2026

How does this Porsche 911 magnesium transmission look?
We finished it in H series “Sniper Grey”

Address

Dodzo’s/Unit E2 C/o National Storage 229 Kaikorai Valley Road
Dunedin
9011

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 4pm

Website

Alerts

Be the first to know and let us send you an email when Dodzo’s - Vapour Blasting and Cerakote finishing. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Dodzo’s - Vapour Blasting and Cerakote finishing.:

Share