Latta Performance & Repair

Latta Performance & Repair Holley carburetor tuning & setup, Rust repair & patch panel fabrication, Custom performance exhaust.

XA Falcon coupe in for some tough Ho**er Aerochamber mufflers & custom tail pipes to suit its new 9” diff setup. Slash c...
23/07/2026

XA Falcon coupe in for some tough Ho**er Aerochamber mufflers & custom tail pipes to suit its new 9” diff setup. Slash cut stainless tips exiting behind the fat 295s to send that smoke sideways.

Fresh Holley carb fitted and set up, repairs done to a noisey header, full set of fresh spark plugs screwed in with the appropriate gap to suit the electronic ignition setup.

A quick road tune got the 351W singing some sweet SBF music through the new exhaust.

Enjoy melting some tyres Malcolm!

Full stainless system for Spencer’s 54 chevy. Stainless block huggers up front and some curly header pipes to get around...
16/07/2026

Full stainless system for Spencer’s 54 chevy. Stainless block huggers up front and some curly header pipes to get around the rack & pinion conversion in the front end. X-piped for power, sound and drone reduction. Wideband port equipped for tuning. Straight through performance stainless mufflers, and some tough hot rod style type pipes out the back. Fully V-band equipped and serviceable system.

Want it shiny? Get in touch.

01/07/2026

What Stu said!

Custom alloy intercooler piping now available! It’s been a goal of mine to get my head around alloy TIG and we’re gettin...
25/06/2026

Custom alloy intercooler piping now available!

It’s been a goal of mine to get my head around alloy TIG and we’re getting there at pace.

Madoc from Skyline Roofing has a serious R32 drift car and the Fenix Radiators ‘cooler setup needed a bit of a re-do to match recent upgrades.

After remounting the unit itself I welded some quick-release intercooler clamps to the ‘cooler itself and fabbed up a pair of 3” alloy solid pipes on both sides from the turbo and to the throttle body.

This should help to keep the IATs on the big bad built RB nicey-icey and eliminate the issues previously faced with running high boost causing the several silicone couplers to pop off when least desired.

Looking forward to plumbing up more boost! If you need a custom intercooler and cold-side setup sorted, hit me up for a good deal! I give discount rates for Motorsport vehicles especially if they want a big Latta Performance logo on them.

MERCH DROP! Been a long time coming, massive shoutout for repeat artistic offender for the hand drawn original artwork ...
04/06/2026

MERCH DROP!

Been a long time coming, massive shoutout for repeat artistic offender for the hand drawn original artwork of my dirty old pickup & .nz for the layout, colouring and original logo.

knocked it out the park with some high quality, long lasting screen prints on some really nice hoods and tees.

Hoods S-2XL available, super warm heavyweight AS Colour ‘Heavy Hood’ - my favourite hoodie for working in the colder months and they smell kinda tasty when you burn them with a welder - $100 all sizes, they are an oversized fit so trying on recommended

Tees M-2XL available Comfy & relaxed fit Gildan ‘Hammer’ tees, soft heavyweight cotton with a large front logo/pickup design -$40
*only one M left, I will be doing another run so S*M can preorder*

Hats - one size. Large frame style, full panel trucker shape Realtree style camo with the Latta logo in blaze orange embroidered on the front - transmission fluid blends into the camo for when you bonk your dome working on that crusty old project car -$35

DM to secure yours now or come down to 307 Vogel street to grab something, shipping also available. Can possibly drop off some local items.

Support your local Carburetor Cowboy!

19 feet of cold steel and cool appeal 😎Big ‘67 Cadillac Fleetwood all sorted for important wedding car duties coming up....
08/04/2026

19 feet of cold steel and cool appeal 😎

Big ‘67 Cadillac Fleetwood all sorted for important wedding car duties coming up.

Very original under the hood, the big Caddy was in need of some repairs and upgrades to ensure the 429 big block can keep running smooth for years to come.

Main parts of the job were: Replacement water pump and ignition upgrade parts imported from the US and fitted, removing the points ignition system to upgrade to a 12V electronic system, some oil leaks sorted, a bit of a checkup on the carb tune, some unnecessary components under the hood removed and fresh hoses & gaskets etc where needed.

Ran it through for a WOF and we needed some tyres and couple small bits, all sorted now and it’s on the road.

This behemoth rides like a cloud but gets up and boogies when the big shiny pedal meets the carpet.

#429

29/03/2026

I had a great time at the Lawrence 1/4 Mile sprint as per usual, one of the best events in the south. I bolted on my dirty side-exit straight pipes and the big ol’ Chebby cut high 13s on my dragy all day. It was a privilege to see some customer cars do well also. See you there next year!

Back on the tools for 2026!If you’ve got some goals this year for your project vehicle, daily driver, race car, hot rod ...
04/01/2026

Back on the tools for 2026!

If you’ve got some goals this year for your project vehicle, daily driver, race car, hot rod or more get in touch and we can bring those horsepower dreams to life.

I’m pretty screwed for bigger jobs until March or so at this stage but may be able to sneak in tunes or exhaust jobs so hit me up.

Address

307 Vogel Street
Dunedin
9016

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+6421632462

Website

Alerts

Be the first to know and let us send you an email when Latta Performance & Repair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Latta Performance & Repair:

Shortcuts

Share

Category