Scales Snails Turbocharger Upgrades

Scales Snails Turbocharger Upgrades Turbo Upgrades and Rebuilds - specialising in Borgwarner Mazda Mps and Mitsubishi turbos

Are there any CT26 enthusiasts out there wanting a sick upgrade to their rig? A while back I mistakenly purchased the wr...
10/08/2026

Are there any CT26 enthusiasts out there wanting a sick upgrade to their rig?

A while back I mistakenly purchased the wrong parts for a different Toyota turbo - so these ones have been sitting around for a while now ready to go.

They feature the 40% lighter, improved aero, 9 bladed turbine along with a Supra sized, billet compressor upgrade.

This combination on the 1HD has proved incredibly potent, producing over 5psi by 1300rpm and over 15psi by 1800rpm, not dropping at all by redline.

There is only one of these available at this special price, so first come first served 🐌

This Evo X turbo had let go in quite a spectacular fashion. Luckily with a spare turbo not far away, I was quickly able ...
07/04/2026

This Evo X turbo had let go in quite a spectacular fashion. Luckily with a spare turbo not far away, I was quickly able to rectify the situation and upgrade to a more reliable and higher flowing setup without the need for expensive machining 🐌

SSTX4 all finished up with a spicy bronze cerakote from to finish it off
30/03/2026

SSTX4 all finished up with a spicy bronze cerakote from to finish it off

There's just something next level about these air curve compressor wheels 🐌
04/10/2025

There's just something next level about these air curve compressor wheels 🐌

Pretty rare to get to do two types of Evo turbo these days back to back - bits it's been my pleasure this week!Both an E...
22/05/2025

Pretty rare to get to do two types of Evo turbo these days back to back - bits it's been my pleasure this week!

Both an Evo 3 and Evo 7 turbo here which spin in opposite directions to each other.

Carrying out basically identical upgrades on these turbos can bring them twenty plus years into the future. Fitting the much more efficient and taller billet compressor wheels with the much improved aero package on the 9 blade turbine wheel packs a massive punch for its size. These upgrades are effective and don't require any additional machining so keep costs to a minimum. Expect to see 10-15% more power from these while improving both bottom end and transient response.

Like any of my turbos these wouldn't go without the usual upgraded bearing and seal package to help take the extra load and provide that reliability we are all after

🐌

Well this was a first for me last night!Scales snails turbocharger upgrades does not authorize the use of o-rings in lie...
16/05/2025

Well this was a first for me last night!

Scales snails turbocharger upgrades does not authorize the use of o-rings in lieu of the normal metal piston ring style seals 🫠

A couple of unique turbos here - possibly the world's only T51r K0422 which I have upgraded with a Xona turbine and a GT...
09/04/2025

A couple of unique turbos here - possibly the world's only T51r K0422 which I have upgraded with a Xona turbine and a GTX compressor wheel.

Then we have an extra spicy T51r SSTX2867r with an air curve compressor. These flow a lot for their size and have performed great in the past!

I will be taking a slight break as we relocate again to a new town. I will still be available on messenger but I should be back into things around mid May 🙂

🐌

Looking for something in between a stock turbo and a big boy but don't want to break the bank? Enter the K0422X. With a ...
18/11/2024

Looking for something in between a stock turbo and a big boy but don't want to break the bank? Enter the K0422X.

With a high flowing, air curve, point milled compressor, and a Xona turbine wheel - this turbo can eat more air for its size than any other turbo in factory configuration.

We have had really good results with these designs of compressor wheels and I expect great numbers out of it.

Starting from $1050, this is slightly more than the K0422+, but worth every penny

🐌

Selling my barely used Garrett based SSTX-3076r reverse rotation gen 2 supercore.This turbo is rated for between 400-750...
07/10/2024

Selling my barely used Garrett based SSTX-3076r reverse rotation gen 2 supercore.

This turbo is rated for between 400-750hp, featuring a 58mm gen 2 compressor wheel it's capable of flowing up to 67lbs/min of airflow.

The turbine on this turbo is a 5+5 blade xona style which reduces top end back pressure and is 15% lighter than the equivalent gt30r turbine, improving transient response and spool.

This turbo was built for a 4g63t, being reverse rotation and with the correct turbine housing this can bolt straight to a stock fl**ge Evo 4-9 manifold for OEM style placement with great response. Expect power to continue increasing up to 8500rpm with a 2L engine.

Flick me a message if you are interested 😉

01/09/2024

The new workshop is almost set up so I am available to take orders!! Flick me a message and let me know what you're after and I can get you sorted!

Address

Whenuapai
Auckland
0618

Website

Alerts

Be the first to know and let us send you an email when Scales Snails Turbocharger Upgrades posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category