Zen-X moto works

Zen-X moto works Wel come in

Permanently closed.
12/11/2023

Good morning ZEN-X FAMILY ❤
16/12/2021

Good morning ZEN-X FAMILY ❤

 # # #  .. Basic trouble shooting  # of your motorcycle ..
09/12/2021

# # # .. Basic trouble shooting # of your motorcycle ..

Ride with pride 🤘 Bikemandu
09/12/2021

Ride with pride 🤘
Bikemandu

09/12/2021

Zen-X moto works
We r located near suncity apartment , PepsiCola ....

09/12/2021
 # zen X moto works # # # motorcycle workshop.. #+ Remember us for genuine service...
09/12/2021

# zen X moto works # # # motorcycle workshop.. #
+ Remember us for genuine service...

26/11/2021

Do u love ur motorcycle machine????
_ If yes ,let's get some tips to care ur own machine ( motorcycle )..

GENERAL SAFETY TIPS..

# It is best to change your oil when it is HOT, or at least warm, from running and everything is mixed up.

# L**e your rear chain when you return from a ride and the chain is HOT, so the oil will pe*****te better.

# If your engine is water cooled, check the coolant level in the overflow reservoir when it is HOT.

# To get the most accurate reading, run your compression tests when the engine is HOT, but I never do. I mean really... IT'S HOT!

# To get an accurate reading, check your tire pressures when the tire is COLD. Air expands when it is hot from running.

# Only remove the Radiator Cap when it is COLD, so you do not get sprayed with boiling water. A good thing that.

# Check Valve Clearances when the engine is COLD. Remember, metal expands when it is hot.

"Speed costs money, how fast can you afford to go?".......
26/11/2021

"Speed costs money, how fast can you afford to go?".......

 # STARTING BIKE WHEN SELF NOT WORKING AND HAVE NO KICK ....                                If you don't have a kick sta...
25/11/2021

# STARTING BIKE WHEN SELF NOT WORKING AND HAVE NO KICK ....

If you don't have a kick starter and your electric starter fails, you only have one choice... push start it. The drill is this. Put the engine in second gear. This will allow the rear wheel to turn the engine over easier. Now pull the bike BACKWARDS with the clutch engaged. You will feel the engine turn over and then the rear wheel will lock up from the engine compression. This means that the piston is just past Top-Dead-Center of the compression stroke only in reverse. This is right where you want to be. With the ignition on, choke and throttle set, pull the clutch lever in and start pushing. Push as fast as you can. When you are going as fast as you can push jump onto the bike and let go of the clutch. You want to release the clutch exactly when your rear end hits the seat. You can land side saddle or straddling the bike. If the engine starts, pull in the clutch lever, keep the engine running, seat yourself properly on the bike and off you go! If it does not start, you will have to reset the engine and try again. On a big bike you can work up quite a sweat doing this! It helps if you can push down hill

19/11/2021

Overall works and engine works garna sakne motorcycle mechanic wanted.
PepsiCola near suncity apartment..

Address

05
Kathmandu
44600

Telephone

+9779869996916

Website

Alerts

Be the first to know and let us send you an email when Zen-X moto works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Zen-X moto works:

Share