VE Haldex Controller

Startpagina
Nederland
Beusichem
VE Haldex Controller

vd Veer engineering – Specialists in Haldex controllers, CANbus converters & custom electronics.
(1)

From Gen1–Gen5 Haldex standalone controllers to PQ–MQB CAN integration for swaps, we deliver performance solutions for VAG cars and custom projects worldwide. vd Veer Engineering – Performance Electronics & Control Solutions

At vd Veer Engineering we design and build advanced electronic solutions for performance cars. Our products and services focus on giving enthusiasts and professionals full co

ntrol over their drivetrain and vehicle electronics.

⚙️ Our specialties:
• Haldex Controllers – custom standalone & plug-and-play solutions for Gen1–Gen5, optimized for performance, drag racing, and AWD tuning.
• CANbus Converters – bridging PQ ↔ MQB platforms for engine swaps (R32, R36, and more).
• Custom ECU & Wiring – standalone looms, CAN integration, and swap support.
• Software Development – firmware, mapping tools, and AI-based optimization.

🚗 What we do:
From VAG Haldex upgrades to complex engine swaps and CANbus integration, vd Veer Engineering delivers tested, proven, and innovative solutions that make modern performance possible.

🌍 Serving both workshops and private customers worldwide.

24/04/2026

Golf 7R with 3.6L R36 VR6 and DQ250 DSG running through our PQ–MQB CAN Convertor.

Most faults cleared.
Full diagnostics.
VCDS communication working like OEM.

That’s the difference between “running” and “done”.

05/04/2026

Not gonna lie… sometimes we mess up 😅
That’s what happens when wiring looms are built by actual humans.

But hey — that’s why this little tester exists 👇

⚡ Plug it in
🔴 Spot the mistake instantly
🟢 Fix it and good to go

In this reel: one wrong harness… and one quick save thanks to the LEDs.

No drama, just a quick check and back to building 👌

03/04/2026

🚨 OLD STOCK SALE – LIMITED UNITS AVAILABLE 🚨

The CAN Convertor RPM Coil is now available at a reduced price as old stock — but here’s the key:
Brand new hardware + flashed with the latest firmware

Perfect for Engine Swaps
Running a modern ECU in a classic VAG? This is your plug-and-play solution to keep your OEM tachometer and speedometer fully functional.

✔ Convert CAN RPM → Analog (coil / 12V)
✔ Convert CAN speed (ABS/DSG) → VSS output
✔ Works with PQ, MQB, MLB + standalone ECUs
✔ Supports Mk1 / Mk2 / Mk3 / Corrado / Passat B3 clusters
✔ Coil & digital tacho support (4 & 6 cylinder)

⚙️ Advanced Features
• Needle sweep on startup
• Built-in WiFi (live data + configuration)
• CAN simulation (avoid swap-related errors)
• Flexible signal conversion (RPM + speed both ways)

💡 Ideal for builds like:
R32 / R36 swaps, TFSI conversions, standalone ECU setups, or full custom projects.

⚠️ Important:
This is older hardware revision stock → fully tested, fully functional, and updated to the latest firmware.
📦 Once it’s gone, it’s gone.

⚙️ Advanced Features
• Needle sweep on startup
• Built-in WiFi (live data + configuration)
• CAN simulation (avoid swap-related errors)
• Flexible signal conversion (RPM + speed both ways)

💡 Ideal for builds like:
R32 / R36 swaps, TFSI conversions, standalone ECU setups, or full custom projects.

⚠️ Important:
This is older hardware revision stock → fully tested, fully functional, and updated to the latest firmware.
📦 Once it’s gone, it’s gone.

CAN Convertor Digital
https://www.dsgcontroller.com/shop/can-convertor/can-convertor-rpm-digital-old-stock/

CAN Convertor Coil
https://www.dsgcontroller.com/shop/can-convertor/can-convertor-rpm-coil-old-stock/

13/03/2026

VD Veer Engineering | PQ & MQB DQ250 DQ500 DQ381 DSG Motorsport Gear Selector — Now Available

The Vd Veer Engineering DSG Motorsport Gear Selector is now available.

A plug & play CAN-based gear selector designed for VAG PQ and MQB platforms with DSG transmissions, developed for motorsport, drag racing and high-performance builds where the OEM selector is removed.

• Compact 6-button motorsport keypad
• Full electronic P / N / D selector simulation
• Real-time gear position feedback from DSG
• CAN-integrated communication with DSG TCU
• Backlighting linked to vehicle lighting
• Error and fault indication via keypad
• Paddle-Driven Selector Mod
• Plug & play installation

Optional Paddle-Driven Selector Mode
Allows selector control using OEM CAN shift paddles:
• P / N → D via Shift Up (vehicle speed 0 + brake active)
• D / S / M → N via Shift Down (vehicle speed 0 + brake active)
All transitions are validated to maintain DSG plausibility and drivetrain safety.

Designed for:
• Race cars
• Drag builds
• DSG conversions
• Interior-simplified builds

Compatible with many performance platforms such as:
• Golf 6R
• Golf 7R
• Audi TTRS
• Audi RS3
• and other VAG DSG-equipped builds

Built for reliability, deterministic state control and motorsport use.

Available now:
https://www.dsgcontroller.com/shop/dsg-controller/dsg-motorsport-gear-selector/

18/02/2026

vd Veer Engineering | Retrofitting a Scirocco auxiliary gauge into a Golf MK7

This setup converts MQB CAN to PQ protocol so the factory PQ gauge operates exactly as intended.
OEM look, seamless integration — designed for a customer project.

www.vdveer-engineering.nl

26/12/2025

VD Veer Engineering | PQ and MQB DSG DQ250 DQ500 DQ381 Motorsport Development

We are developing a motorsport-focused MQB DSG gear selector replacement for the Golf 7R platform but can be used on any PQ or MQB car.

• Compact button-based gear selection
• Integrated feedback LEDs
• Real-time gear status directly from the DSG TCU
• Backlight working with interior lights
• Can indicate errors or fault codes
• No OEM selector required
• Plug and play

Designed for race cars, track builds, and interior simplification.

This project is part of our custom product development for a motorsport client, tailored to specific vehicle and driver requirements.

Built for reliability, clarity, and driver focus under high-load conditions.

www.vdveer-engineering.nl

dsg canbus vag racecar trackbuild

21/12/2025

VD Veer Engineering | MQB DSG DQ250 DQ500 DQ381 Motorsport Development

We are developing a motorsport-focused MQB DSG gear selector replacement for the Golf 7R platform.

• Compact button-based gear selection
• Integrated feedback LEDs
• Real-time gear status directly from the DSG TCU
• No OEM selector required

Designed for race cars, track builds, and interior simplification.

This project is part of our custom product development for a motorsport client, tailored to specific vehicle and driver requirements.

Built for reliability, clarity, and driver focus under high-load conditions.

More details soon.
www.vdveer-engineering.nl

dsg canbus vag racecar trackbuild

10/12/2025

Black Friday is almost over!
Save up to 20% on engine swap electronics:
Haldex controllers, CAN convertors, DSG wiring, EHPS controllers & more.
Perfect for your winter build or upgrade.

👉 Grab your discount before December 12!

www.vdveer-engineering.nl/shop

01/12/2025

26/11/2025

⚡ HYDRAULIC STEERING FOR ENGINE SWAPS 🔥
BLACK FRIDAY 2025 – 15% OFF

Swapping engines but want to keep your hydraulic steering rack? The VE VAG EHPS Controller lets you remove the mechanical pump while retaining full steering functionality.

✔ Electrically powered hydraulic steering controller
✔ Ideal for all VAG engine swap projects
✔ Keeps your original engine intact
✔ Maintains full hydraulic steering performance

Perfect solution for engine swaps where mechanical pump removal is needed without losing steering feel.

⏳ Grab 15% OFF this Black Friday!
👉 Shop here: www.vdveer-engineering.nl/shop/eps-controller/vag-ephs-controller-detail

26/11/2025

⚡ DSG SWAPS MADE EASY 🔥
BLACK FRIDAY 2025 – 20% OFF

Planning a DSG swap into an older VW/Audi platform? The VE DSG Wiring Harnesses make installation simple and reliable, supporting DQ250, DQ500, DQ381, PQ, and MQB transmissions.

✔ Wiring solution for DSG swaps
✔ Swaps into cars like: Mk2 Golf, Mk3 Golf, Corrado, Passat, and more
✔ Saves time and reduces installation complexity

⏳ Black Friday discount active now – 20% OFF
👉 Shop here: www.vdveer-engineering.nl/shop/wiring-harness/dsg-wiring

Adres

Beusichem

Website

http://www.vdveer-engineering.nl/

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer VE Haldex Controller nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.