Dyno-ChiptuningFiles

22/05/2026

🔥We are proud to announce that Dyno-ChiptuningFiles has developed stage 1 software for the Iveco Daily 3.0 (EUR6Df) with 180hp!🔥

********************

Capacity: 2998cc
Bore x stroke: 95.8 x 104.0 (mm)
Compression ratio: 18.0 (:1)
Power approx: 180hp
Power output: 220hp
Torque approx: 430nm
Torque output: 550nm
ECU: Bosch MD1CS069
Read Method: AutoTuner OBD Mode in BENCH

13/05/2026

🔥We are proud to announce that Dyno-ChiptuningFiles has developed stage 1 software for the Audi RS3 2.5 TFSI with 400hp!🔥

********************

Capacity: 2480cc
Bore x stroke: 82.5 x 92.8 (mm)
Compression ratio: 10.0 (:1)
Power approx: 400hp
Power output: 460hp
Torque approx: 500nm
Torque output: 620nm
ECU: Bosch MG1CS163
Read Method: bFlash OBD ( After Unlock by other Company )

23/04/2026

🔥We are proud to announce that Dyno-ChiptuningFiles has developed stage 1 software for the Porsche Panamera 4.0T GTS with 480hp!🔥

********************

Capacity: 3996cc
Bore x stroke: 86.0 x 86.0 (mm)
Compression ratio: 10.1 (:1)
Power approx: 480hp
Power output: 640hp
Torque approx: 620nm
Torque output: 880nm
ECU: Bosch MG1CS008
Read Method: AutoTuner BENCH / OBD

27/03/2026

🔥We are proud to announce that Dyno-ChiptuningFiles has improved stage 1 software for the Iveco Daily 160 2.3 (EUR6) with 156hp!🔥

********************

Capacity: 2287cc
Bore x stroke: 88.0 x 94.0 (mm)
Compression ratio: 16.0 (:1)
Power approx: 156hp
Power output: 185hp
Torque approx: 350nm
Torque output: 420nm
ECU: Bosch EDC17C49
Read Method: AutoTuner BENCH

26/02/2026

🔥We are proud to announce that Dyno-ChiptuningFiles has developed stage 1 software for the full electric Porsche Taycan 4 (PB+) with 475hp!🔥

********************

Power approx: 475hp
Power output: 730hp
Torque approx: 500nm
Torque output: 660nm
ECU: Siemens/Continental ASG1
Read Method: Autotuner OBD

12/02/2026

🔥We are proud to announce that Dyno-ChiptuningFiles has developed stage 1 software for the Audi A4 35 TFSI with 150hp!🔥

********************

Capacity: 1984cc
Bore x stroke: 82.5 x 92.8 (mm)
Compression ratio: 10.5 (:1)
Power approx: 150hp
Power output: 245hp
Torque approx: 270nm
Torque output: 420nm
ECU: Bosch MG1CS031
Read Method: AutoTuner OBD

28/01/2026

🔥We are proud to announce that Dyno-ChiptuningFiles has developed stage 1 software for the Audi SQ8 with 507hp!🔥

********************

Capacity: 3993cc
Bore x stroke: 84.5 x 89.0 (mm)
Compression ratio: 10.1 (:1)
Power approx: 507hp
Power output: 660hp
Torque approx: 770nm
Torque output: 950nm
ECU: Bosch MG1CS008
Read Method: AutoTuner OBD

20/01/2026

We are proud to announce that Dyno-ChiptuningFiles has developed stage 1 software for the Ford Ranger 2.0 Ecoblue with 205hp!

********************

Capacity: 1996cc
Bore x stroke: 84.01 x 90.03 (mm)
Compression ratio: 15.8 (:1)
Power approx: 205hp
Power output: 225hp
Torque approx: 500nm
Torque output: 560nm
ECU: Continental SID213
Read Method: CMD OBD

11/12/2025

🔥We are proud to announce that Dyno-ChiptuningFiles has developed stage 1 software for the Opel Insignia 1.5 Turbo with 165hp!🔥

********************

Capacity: 1490cc
Bore x stroke: 74.0 x 81.0 (mm)
Compression ratio: 10.0 (:1)
Power approx: 165hp
Power output: 180hp
Torque approx: 250nm
Torque output: 300nm
ECU: Delco E88
Read Method: MagicMotorsport OBD ( After BENCH unlock)

26/11/2025