Sam's Miniworks

Sam's Miniworks Here at MiniWorks, we will do our best to upkeep our customers mini in the best running condition...

A fast road 1275 build in progress.....-Piper BP 300 rally profile camshaft -Centre main strap-All new 0.10 main and con...
13/06/2024

A fast road 1275 build in progress.....
-Piper BP 300 rally profile camshaft
-Centre main strap
-All new 0.10 main and con rod bearings
-New piston rings
-Changed the original Clubman 1275GT crankshaft to the A series crankshaft
-Dry Decked

Engine wash on a sunny day anyone?
22/02/2024

Engine wash on a sunny day anyone?

Parts don’t come easy hence custom fabrication works. Not an easy job indeed… Next up powder coating or alcantara leathe...
26/01/2024

Parts don’t come easy hence custom fabrication works. Not an easy job indeed… Next up powder coating or alcantara leather perhaps…

Not all temperature sender units gives the correct temperature readings to the Temperature Meter.....I have to test each...
20/01/2024

Not all temperature sender units gives the correct temperature readings to the Temperature Meter.....
I have to test each and every sender unit to match the meter readings.....
A test till 85° degrees the radiation electric fan kicks in...

Finishing touches to AC system
19/01/2024

Finishing touches to AC system

Busy Friday evening for the start of new year 2024!
05/01/2024

Busy Friday evening for the start of new year 2024!

Fitted new piston rings size 0.40Next to fit it in the block....
05/12/2023

Fitted new piston rings size 0.40
Next to fit it in the block....

All ready for fitment....
01/12/2023

All ready for fitment....

So the MGA's block is painted....the cylinder head is back to the machine shop for some fine adjustments so it too nee...
01/12/2023

So the MGA's block is painted....the cylinder head is back to the machine shop for some fine adjustments so it too needs to be painted...

All parts ready after putting in piston sleeves, slightly lightened the flywheel and of course balanced it with the cran...
29/11/2023

All parts ready after putting in piston sleeves, slightly lightened the flywheel and of course balanced it with the crankshaft too....

Preparation engine block for the MGA's full overhaul....Now l managed to dig out those rust running in the engine block,...
29/11/2023

Preparation engine block for the MGA's full overhaul....
Now l managed to dig out those rust running in the engine block, where before the drain plug hole water doesn't comes out from it...well many years of unflushing the radiation system leads to blockage of the water ways in the block cooling system...next is to high pressure water through all the water holes to at least get rid of whatever that's left in .....

Delivery to the owner....
22/11/2023

Delivery to the owner....

Address

Kampong Pasir, Segambut
Kuala Lumpur
51200

Opening Hours

Monday 11:00 - 20:00
Tuesday 11:00 - 17:00
Wednesday 11:00 - 17:00
Thursday 11:00 - 17:00
Friday 11:00 - 17:00

Telephone

+60123700737

Website

Alerts

Be the first to know and let us send you an email when Sam's Miniworks posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Sam's Miniworks:

Shortcuts

Share

Category