DaYu Auto Suspension shocks/coil springs.

Directions Website Contact the business

DaYu  Auto Suspension shocks/coil springs. We are Suspension specialist stocking original Shock absorbers and coil springs and other suspension components for all car models. Our Contacts are 0746560486

We are Fast Reliable and Honest. WE OFFER 30,000 KM OR 1 YEARS WARRANTY ON EACH.

BM Series is designed with a suspension system that balances driving comfort, handling precision and road stability. How...
05/11/2026

BM Series is designed with a suspension system that balances driving comfort, handling precision and road stability. However, its relatively low ride height can become a challenge when navigating Kenyan roads, especially over raised speed bumps, potholes, uneven surfaces and steep driveways.
When a vehicle sits lower than its intended operating height, one of the important areas to investigate is the condition and performance of its coil springs.
Coil springs are fundamental load-bearing components. They support the vehicle's static weight, determine suspension ride height and influence how the suspension responds to varying road loads.
Over time, repeated compression cycles, material fatigue and operating conditions can affect spring performance, potentially resulting in reduced ride height and inadequate suspension support.
For this Mazda Axela BM Series, we focused on improving ground clearance through the replacement of all four coil springs.
Replacing the complete set allowed us to address both front and rear spring support rather than correcting only one axle. This is important because front-to-rear ride-height balance influences vehicle attitude, suspension geometry and overall handling characteristics.
However, a proper spring replacement is not simply about making a vehicle taller. Spring rate, free length, load capacity, suspension travel and compatibility with the existing shock absorbers must all be considered.
The objective is to achieve practical ground clearance without unnecessarily compromising ride comfort, stability or the vehicle's original driving characteristics.
At DAYU AUTO SUSPENSION, we understand that every vehicle has its own suspension requirements. We don't believe in random spring fitting; we believe in selecting the right suspension solution for the vehicle and its operating conditions.
YOUR MAZDA AXELA DOESN'T HAVE TO STRUGGLE WITH EVERY SPEED BUMP. THE RIGHT SPRING SETUP MAKES A DIFFERENCE!
📞 Call/WhatsApp: 0746 560 486 / 0734 671

This Mazda Axela BM Series came through Workshop for a comprehensive suspension assessment and ground-clearance adjustme...
03/11/2026

This Mazda Axela BM Series came through Workshop for a comprehensive suspension assessment and ground-clearance adjustment. Rather than concentrating on ride height alone, we went further and inspected the entire suspension and relevant undercarriage components to identify wear, looseness and potential sources of unwanted vibration and noise.
We achieved the desired ground clearance while attending to several important mechanical details.
The stabilizer links were replaced to restore proper connection between the anti-roll bar and suspension assembly, helping control lateral body movement during cornering. We also replaced the worn stabilizer D-bushes, which are responsible for securing the anti-roll bar and allowing it to function correctly.
Both the large and small suspension arm bushes were attended to, addressing deterioration in the rubber isolation points responsible for controlling unwanted movement between suspension components and the vehicle chassis.
The cross bearings were serviced, while the CV joints were inspected and serviced to maintain proper torque transmission through the drivetrain. We also replaced the inner driveshaft boot rubber to restore protection against grease loss and prevent dirt and moisture from entering the CV joint assembly.
On the braking system, we replaced the brake pads and serviced the brake calipers to ensure proper component movement and braking operation.
The tie-rod ends were inspected and found to be in serviceable condition, so replacement was unnecessary. They were lubricated where applicable. On the rear suspension, we replaced the two worn bushes, restoring the required support and reducing unwanted movement.
What makes this job particularly important is the attention given to the relationship between suspension geometry, rubber bushings, steering linkages, drivetrain components and braking performance.
i believe in addressing the entire system rather than treating isolated symptoms. ground clearance, comfort, stabilit

The Mazda 6 is admired for its elegant design, sporty character, refined handling, and comfortable driving experience. I...
01/11/2026

The Mazda 6 is admired for its elegant design, sporty character, refined handling, and comfortable driving experience. Its suspension is engineered to deliver a balance between road comfort and precise handling.
However, driving on Kenyan roads presents a different challenge. Steep speed bumps, potholes, uneven surfaces, and rough access roads can make the relatively low ride height a concern for some Mazda 6 owners.
Improving ground clearance on a vehicle like the Mazda 6 requires more than simply installing taller or stiffer springs. The suspension geometry, shock absorber compatibility, wheel alignment, and overall vehicle dynamics must all be considered.
Another important factor is spring fatigue. Over time, repeated loading, corrosion, and normal wear can weaken coil springs, potentially reducing ride height and affecting suspension performance.
At DAYU AUTO SUSPENSION, we believe a successful suspension upgrade should address the actual problem without unnecessarily compromising the vehicle's original driving characteristics.
Our approach considers:
Appropriate spring selection and spring rate.
Correct ride height and ground clearance.
Shock absorber compatibility.
Suspension geometry and wheel alignment.
Maintaining a balance between comfort and stability.
Modern Mazda 6 models may also feature advanced i-ACTIVSENSE safety technologies, depending on their specifications. Any suspension modification must take these systems into consideration, including relevant inspections and calibration where required.
The objective is simple: improve everyday practicality while respecting the engineering that makes the Mazda 6 such a refined vehicle.
At DAYU AUTO SUSPENSION, we don't just raise vehicles. We work towards the right height, the right suspension balance, and the right driving experience.
The right springs. The right height. Comfort in every journey!
Call/WhatsApp: 0746 560 486 | 0734 671 090

Suspension system does more than provide comfort. It is responsible for maintaining tyre contact with the road, controll...
01/11/2026

Suspension system does more than provide comfort. It is responsible for maintaining tyre contact with the road, controlling body movement and supporting stability during braking, acceleration and cornering.
At the centre of this operation are the shock absorbers, technically known as dampers.
While coil springs support the vehicle's weight and determine ride height, shock absorbers control suspension movement through hydraulic resistance. They regulate how quickly the suspension compresses and rebounds after encountering road irregularities.
As shock absorbers wear out, their damping efficiency gradually deteriorates. The warning signs may include excessive bouncing after passing speed bumps, nose diving during braking, excessive body roll when cornering, poor stability on uneven roads, unusual tyre wear patterns and visible hydraulic oil leakage around the damper body.
You may also notice that your vehicle feels unsettled when negotiating potholes, changing lanes or driving over rough surfaces. This happens because weakened damping allows excessive suspension oscillation, making it harder to maintain consistent tyre contact with the road.
One important detail many motorists overlook is that worn shock absorbers and weakened coil springs are not the same problem. Springs support vehicle weight and maintain ride height, while shock absorbers control suspension movement. Both must work together for the suspension system to perform correctly.
On Kenyan roads, where potholes, speed bumps and uneven surfaces are part of everyday driving, a properly functioning suspension system is essential.
At DAYU AUTO SUSPENSION, we don't believe in replacing parts through guesswork. We assess the suspension system, identify the actual problem and recommend the appropriate solution to restore comfort, control and stability.
Remember: ur shock absorbers are not just comfort components; they are essential to your vehicle's road-holding performance and safety.
Call/WhatsApp: 0746 560 486

German vehicles are engineered with precision, balancing comfort, stability, handling and driving performance. But when ...
01/11/2026

German vehicles are engineered with precision, balancing comfort, stability, handling and driving performance. But when that engineering meets Kenyan roads, even a well-designed vehicle can face a practical challenge: limited ground clearance.
Potholes, uneven surfaces, steep driveways and aggressive speed bumps can make driving a low-sitting Mercedes-Benz uncomfortable and stressful.
That is where suspension expertise matters.
At DAYU AUTO SUSPENSION, our approach is not simply to make a vehicle taller. It is to achieve the right ride height while respecting the suspension characteristics that make the vehicle what it is.
We recently worked on this beautiful silver Mercedes-Benz C-Class, giving it a carefully executed ground-clearance lift.
The objective was clear: improve its practicality on Kenyan roads while maintaining the balance between ride comfort, stability and handling.
A proper suspension adjustment requires more than fitting stronger springs. Spring rate, vehicle weight distribution, shock absorber compatibility, suspension travel and geometry all matter. Wheel alignment is also essential after ride-height changes.
The goal is to avoid a setup that looks impressive but compromises the vehicle's road behaviour.
A Mercedes-Benz should still feel like a Mercedes-Benz after a lift!
At Dayu Auto Suspension, we believe in engineering solutions, not guesswork. Every vehicle deserves a suspension setup suited to its design and the roads it travels.
THE RIGHT SPRINGS. THE RIGHT HEIGHT. COMFORT IN EVERY JOURNEY!
📞 Call/WhatsApp: 0746 560 486 / 0734 671 090

Every time your vehicle encounters a speed bump or pothole, its suspension system goes into action.The coil springs comp...
30/10/2026

Every time your vehicle encounters a speed bump or pothole, its suspension system goes into action.
The coil springs compress and extend to accommodate road impacts, while shock absorbers control these movements, preventing excessive bouncing and helping maintain tyre contact with the road.
When crossing a speed bump, shock absorbers control suspension compression as the wheels climb and rebound as they descend.
When hitting a pothole, they control the suspension as the wheels drop and rise again.
WHAT HAPPENS WHEN SHOCK ABSORBERS ARE WORN?
Excessive bouncing after speed bumps.
Reduced tyre contact with the road.
Poor stability when cornering.
Excessive nose-diving during braking.
Oil leakage and reduced damping performance.
Shock absorbers are not designed simply to make your vehicle stiff. They are engineered to control suspension movement while balancing comfort, stability, and handling.
At DAYU AUTO SUSPENSION, we understand that springs and shock absorbers must work together. Replacing one while ignoring problems with the other may not solve the underlying suspension problem.
Remember: Springs support the vehicle; shock absorbers control its movement!
The right springs. The right height. Comfort in every journey!

📞 Call/WhatsApp: 0746 560 486 | 0734 671 090

Wish is a popular family-oriented vehicle, appreciated for its spacious interior, versatility, fuel efficiency, and comf...
30/10/2026

Wish is a popular family-oriented vehicle, appreciated for its spacious interior, versatility, fuel efficiency, and comfortable driving experience.
However ,like many family MPVs, its relatively low ride height can become a challenge when navigating Kenya's steep speed bumps, potholes, uneven roads, and rough access routes.
With passengers and luggage on board, insufficient ground clearance can make everyday journeys even more challenging, particularly when the suspension is no longer performing as originally designed.
The suspension system plays an important role in supporting the vehicle's weight, maintaining ride height, absorbing road irregularities, and ensuring predictable handling.
Over time, coil springs can weaken or sag due to repeated loading, mileage, corrosion, and metal fatigue. This may result in reduced ride height, increased risk of scraping, rear-end sagging under load, and changes in suspension geometry.
It is also important to remember that springs and shock absorbers perform different functions. Springs support the vehicle and establish ride height, while shock absorbers control suspension movement.
Simply installing stiffer springs without considering the vehicle's weight, shock absorber compatibility, and suspension geometry may introduce new problems rather than solve the original concern.
When addressing ground-clearance concerns on the Toyota Wish 2013, our focus is on selecting a suitable spring solution based on the vehicle's condition and intended use.
Our considerations include:
Appropriate spring rate and load support.
Correct ride height and ground clearance.
Shock absorber compatibility.
Suspension geometry and wheel alignment.
Maintaining a practical balance between comfort and stability.
The objective is not to transform the Toyota Wish into an off-road vehicle. It is to make it more practical for everyday driving while respecting the suspension engineering behind its comfort and handling.

This Honda Vezel owner had previously attempted to improve the vehicle's ground clearance using randomly selected spring...
29/10/2026

This Honda Vezel owner had previously attempted to improve the vehicle's ground clearance using randomly selected springs by his mech in ngong . Unfortunately, the experience was far from satisfactory. The desired height was not enough on its own; the overall driving experience also mattered.
After coming across our Facebook posts, the owner made enquiries at DAYU AUTO. We explained our approach and assured the client that our goal was to find a suitable suspension solution that addressed ground clearance without unnecessarily compromising comfort and stability.
Following the visit to our workshop, the results were satisfying! The vehicle achieved improved ground clearance while maintaining the comfortable, stable driving experience the owner wanted.
The Honda Vezel does not necessarily leave the factory with inadequate ground clearance. However, like other SUVs and crossovers, its suspension springs can weaken or sag with age, mileage, corrosion, and repeated loading.
As spring performance deteriorates, several problems may develop:
Reduced ground clearance: The vehicle may sit lower than intended, increasing the risk of scraping on speed bumps.
Excessive bouncing: Worn or weakened springs can contribute to poor suspension performance, although faulty shock absorbers are often a major cause of uncontrolled bouncing.
Rear-end sagging: The rear may sit unusually low when carrying passengers or luggage.
Nose-diving: Excessive front-end dipping during braking can indicate suspension wear or other issues requiring inspection.
Poor performance over speed bumps: Under heavy loads, reduced clearance can make negotiating high speed bumps more challenging.
The important lesson is that not every ground-clearance problem requires random, stiffer springs. The suspension must be assessed as a system, with spring selection, shock absorber condition, component compatibility, and suspension geometry all taken into consideration.
Dayu Auto: 0746560486
0734671090

A vehicle's suspension does much more than absorb bumps and improve comfort. It also plays an important role in controll...
29/10/2026

A vehicle's suspension does much more than absorb bumps and improve comfort. It also plays an important role in controlling body movement, maintaining tyre contact with the road, and supporting predictable handling during cornering.
One of the most noticeable suspension behaviours is BODY ROLL the sideways leaning of a vehicle when turning.
Although some body roll is normal, excessive leaning can affect the vehicle's handling and may indicate that the suspension needs inspection.
When a vehicle enters a corner, lateral forces cause weight to transfer towards the outside wheels. The suspension compresses on one side and extends on the other, resulting in body roll.
Coil springs influence how the vehicle's weight is supported and how much the suspension compresses under these forces.
Weak or sagging springs: Can reduce ride height and available suspension travel, potentially affecting handling and increasing the risk of suspension bottoming out.
Incorrect spring rate: Springs that are too soft or too stiff for the vehicle and its intended use can compromise the balance between comfort, stability, and grip.
Uneven spring performance: Differences in spring condition or ride height from side to side can affect the vehicle's balance and handling.
However, body roll is not controlled by springs alone.
Shock absorbers regulate suspension movement, while anti-roll bars help resist differences in suspension compression between the left and right sides of the vehicle.
As Ayub always say at the workshop ; Installing stiffer springs does not automatically guarantee better handling. Excessive stiffness can compromise comfort and reduce tyre contact on uneven roads, depending on the suspension setup.
Proper suspension performance requires the right balance between spring rate, shock absorber performance, anti-roll bar operation, vehicle weight, and intended use.
At DAYU AUTO SUSPENSION, we look beyond ground clearance. We consider how the suspension supports the vehicle.

The Mazda 3 combines sleek styling, sporty handling, modern safety technology, and a refined driving experience. However...
27/10/2026

The Mazda 3 combines sleek styling, sporty handling, modern safety technology, and a refined driving experience. However, its relatively low ride height can present challenges when navigating Kenya's speed bumps, potholes, steep entrances, and uneven roads.
Improving ground clearance on a modern vehicle like the Mazda 3 requires more than simply installing taller springs. The suspension system is engineered to work as a complete unit, with spring characteristics, shock absorbers, suspension geometry, and wheel alignment all contributing to the vehicle's performance.
The challenge is finding the right balance between additional ground clearance, driving comfort, and stability without overlooking the vehicle's advanced technologies.
Depending on its specification, the Mazda 3 may feature Mazda i-ACTIVSENSE technologies, including Smart Brake Support, Lane-keep Assist, Blind Spot Monitoring, and Mazda Radar Cruise Control. Any suspension modification must take these systems into consideration, with the appropriate inspections and calibration checks carried out where required.
At DAYU AUTO SUSPENSION, we believe every suspension solution should be approached with technical precision. The goal is not merely to raise a vehicle, but to achieve a suitable ride height while paying attention to suspension geometry, component compatibility, alignment, and overall driving performance.
Because on a vehicle as refined as the Mazda 3, ground clearance should never be considered in isolation from comfort, handling, and safety.
DAYU AUTO SUSPENSION
The right springs. The right height. Comfort in every journey!

📞 Call/WhatsApp: 0746 560 486 | 0734 671 090

Address

Maragwa

Alerts

Be the first to know and let us send you an email when DaYu Auto Suspension shocks/coil springs. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to DaYu Auto Suspension shocks/coil springs.:

Shortcuts

Share

Nearby autos & automotive services