Quali sono gli orari di apertura?

Lunedì 08:00 - 13:00 13:30 - 22:00 Martedì 08:00 - 13:00 13:30 - 22:00 Mercoledì 08:00 - 13:00 13:30 - 22:00 Giovedì 08:00 - 13:00 13:30 - 22:00 Venerdì 08:00 - 13:00 13:30 - 22:00

Magicmotorsport

Casa
Italia
Partinico
Magicmotorsport

Magicmotorsport is one of the leading companies for mechatronic equipment
(5)

Through a cutting edge technological development of excellence, we strive to improve people’s lives, offering efficient solutions that are human, simple and sustainable

Founded in Poland by the Skutkiewicz brothers in 1996, today the company has its headquarters in southern Italy with branches in Germany, Spain, Poland and China, as well as a network of distributors spread all over the globe. Mag

icmotorsport has been developing solutions for the automotive industry for more than twenty five years. The MAGPro2 product line has been recognized worldwide since the early 2000s as a reference point in the field of reprogramming and repairing of electronic control units (ECUs) and automatic gearboxes (TCUs). Today our flagship product a programming tool called Flex, the perfect partner for mechatronic workshops, which has been designed to increase productivity and offer customizable solutions that fully support the latest developments in all electronic modules. Our customer care has always been one of our main strengths, offering rapid solutions to our end users all over the world. As of today, our highly skilled technicians offer you 14 hours of continuous multilingual technical and customer support via chat, phone and email. Our range of products does not stop at chiptuning, we also offer solutions for power measurements with our DynoRoad, with our mapping software, StageX developed by our partner Power Division and through the solutions offered by our partner XHorse for both diagnostics and key programming.

17/06/2026

🔥 Dynomag June Deals

Boost performance while saving up to 20%.

⏳ Offer ends June 29.
🔗 magicmotorsport.shop/en/shop/dyno/dyno-accessories.html

16/06/2026

🚀 2 TOOLS IN 1: Are you maximizing your Flex?
Hey tuners! Did you know Flex is actually two powerful tools packed into one device?

As shown in flex pills 4.mp4, it completely redefines your bench work:

Memory Programmer: For secure, seamless module programming.

Breakbox (FlexBox): For clean troubleshooting by splitting lines right on the bench.

💡 The Bench Trick: Use the 2.14 cable to connect your diagnostic tool to the ECU or transmission on your bench. The FlexBox makes the tool think the ECU is still inside the vehicle, allowing you to analyze and program with ease.

Best part? The 2.14 cable and all essential wiring are already included in the kit. No extra purchases needed.

🎯 Many solutions, one tool. Flex.

15/06/2026

☀😎 June Boon!

🤓 Special price, special deals

🔗 magicmotorsport.shop/en/shop/offers/promo.html

09/06/2026

Every workshop has that customer.
Every customer has that request.

Some are challenging.
Some are ambitious.
Some belong in a science fiction movie.

👉 Watch the full video now on our YouTube channel

08/06/2026

⚡ No unlock. No Bench. Just OBD.

With Flex version 7.59.0.0, working on Continental SID212 and SID212EVO ECUs installed on Ford vehicles becomes even faster and more efficient.

The new protocol gives you direct access to the map area and EEPROM memory through the vehicle’s diagnostic port, eliminating the need for Bench unlocking procedures.

Key benefits:
✔ Direct OBD access
✔ No Bench unlock required
✔ Map area read
✔ EEPROM read
✔ Reduced acquisition times
✔ Faster workshop operations

Less time preparing. More time delivering results.

Update your Flex now and discover a smarter way to work on Ford SID212 and SID212EVO ECUs

🔗 magicmotorsport.com/en/flex-sid212-sid212evo-no-unlock/

03/06/2026

A damaged TCU doesn't always mean a new one.

With Flex, you can read the original unit, transfer critical data to a used TCU, and get the vehicle back on the road quickly and safely.

✔ TCU recovery solutions
✔ Used TCU replacement
✔ Reduced downtime
✔ More services for your workshop

Turn a complex repair into a profitable opportunity.

👉 Discover Flex and expand your repair capabilities

29/05/2026

☀ Make June memorable with our trainings
🔗 academy.magicmotorsport.com

28/05/2026

Locked Bosch T93-T87 TCUs?
Not anymore.

With Flex, you can unlock supported TCUs in Bench mode and then work directly via OBD on the vehicle.

Camaro, Silverado, GMC Sierra 1500 and more.

✔ Unlock once
✔ Program via OBD
✔ Flash + EEPROM access
✔ Faster turnaround
✔ Keep every job in-house

And after the unlock?
Your customer can continue programming via OBD with IXI Personal Flasher.

Flex.
Unlock more. Work smarter.

25/05/2026

🏍️ New Flex protocols for Triumph motorcycles are here.

With version 7.58.0.0, Flex adds new OBD support for Keihin KTKS_v1 and KHR4 ECUs installed on Triumph EU4 and EU5 bikes.

This update confirms our continuous commitment to the motorcycle world, developing dedicated solutions for modern two-wheel platforms and giving workshops faster, safer, and more efficient operations directly through the bike diagnostic port.

Now you can:
✔ Virtual read of the ECU
✔ Read map area in OBD
✔ Optimize throttle response
✔ Improve engine efficiency and rideability

Supported ECUs:
• Keihin KTKS_v1 with RH850 processor
• KHR4 with SH72531 microcontroller

⚠️ Required accessories:
FLX2.68 EU5/EU5+ cable or MMS03.002 adapter.

The motorcycle market keeps evolving.
We keep building the tools to stay ahead.

👉 Update your Flex now and discover the new Triumph protocols
🔗 magicmotorsport.com/en/new-flex-protocols-triumph-ecus/

20/05/2026

Two different realities.
One shared obsession: uncompromising performance!

For the first episode of Season 2 of Workshops of Success, we visited Bulldozer & TC Engineering
Between legendary Cosworth engines, advanced aftermarket ECUs, and dyno testing with Dynomag Hub, we captured what it really means to work at the highest level every single day

🎥 An episode built on technique, experience, and real passion
👉 Watch the full video now on our YouTube channel

Indirizzo

C/da Margi Soprano Snc, Zona Artigianale
Partinico
90047

Orario di apertura

Lunedì	08:00 - 13:00
	13:30 - 22:00
Martedì	08:00 - 13:00
	13:30 - 22:00
Mercoledì	08:00 - 13:00
	13:30 - 22:00
Giovedì	08:00 - 13:00
	13:30 - 22:00
Venerdì	08:00 - 13:00
	13:30 - 22:00

Sito Web

http://www.magicmotorsport.com/

Notifiche

Lasciando la tua email puoi essere il primo a sapere quando Magicmotorsport pubblica notizie e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.