The Bullet Factory

Call Directions Website Contact the business

The Bullet Factory The Bullet Factory (aka TBF) specialises in customisation, repaints and servicing Royal Enfield bikes with care and dedication.
(241)

If you own an Enfield, you should consider calling us at 89399-72020. The Bullet Factory is a full-service Rebuilt and Service center in Chennai. It is dedicated to all Royal Enfield fans who love and care for their bikes. Swing by sometime, talk to our mechanics and look at the impeccable bikes that roll out. Whether it's an old Royal Enfield Bullet, or a new Thunderbird 500, you can get everything done right here.

2026 RIDES, RAJASTHAN:March 2025 & thereabouts we rode thru 15 locations around Rajasthan starting at Jaipur. 5,200 kms ...
25/09/2026

2026 RIDES, RAJASTHAN:

March 2025 & thereabouts we rode thru 15 locations around Rajasthan starting at Jaipur. 5,200 kms 43 days. Excitement and thrills unlimited!

JAIPUR FOR YOU: The Splendour of the forts and palaces here are too difficult to show in a few photographs. However here goes:

There are three forts in Jaipur a few kilometres away from each other, the main fort being the Amber Palace and Fort. Also the City Palace.

With a history of over 500 years, these monuments are awe inspiring. One can only imagine their splendour at the peak of their grandeur & power!

For those of you who are not following us: Sudhakar (74) Sulekha (72) now.

23/09/2026

THE ENGINE OF OUR TOURER:

We got back the engine from the lathe shop and found that there was nothing really wrong with it. Minor adjustments were done.

I believe the E20 fuel has something to do with the ceasing of the piston. So now we are mixing normal E20 fuel with and equal quantity of 95 Octane fuel to check results. We will deal with the results seperately.

I think the ideal situation for Cast Iron Overhauled engines, is to open the engine if it is even slightly problematic after (say) 3,500 kms, to check its condition and clearances. May not be possible for all! But now we know that this engine can be pushed for higher performance.

I was considering installing a 17 tooth front end sprocket as the motorcycle is slightly slow on some 450+ km runs. But now, I do not want to tax the engine. Your views?

19/09/2026

AT 74: WORKING POWER TOOLS:

Last week I was surprised that I could work with a power angle grinder for more than two and a half hours! Stiff muscles next morning but good to go again. We are in the process of freshening up our stores' slotted angles!

This video is showing the reshaping of our long distance riding seat! Custom Seats: a hobby for the past decade or more.!!!

15/09/2026

CHECKING OUR ENGINE:

Checking out the heart of our old faithful, I have noted a stiffness in the crank which shouldn't be there having 5,500 kms now.

It is smooth but stiff. Good that it isn't rattly or loose!!! Taking it back to the lathe shop, without opening up the engine so that they can make the required adjustments.

This is something very difficult for normal Cast Iron owners to do because they do not have the facilities to do this!!! We are looking to have this motorcycle running as noiselessly as possible for another 25 to 30,000 kms. Hoping that we have no more trouble with this trusty old steed!

The motorcycle in the background is a 1970 B1 Heavy Crank.

13/09/2026

OUR OLD FAITHFUL:

This is our Royal Enfield Bullet 350 Cast Iron, Engine and Structural design of 1959, on which we have done many many rides. The machine has taken us through tens of thousands of kilometres.

The two times we had a problem, this old faithful brought us back to a safe place where the breakdown could be attended to. Now, after 5500 kms after overhaul, and after 43 days out in rather unfamiliar, hot and lonely roads of Rajasthan, we had a surprise problem when the mechanic took the machine for some short rides locally. A ceased piston!!! After 5,500 kms of high speed (relative) riding in the hot terrain of Rajasthan and the Thar Desert.

Now, since we haven't taken on external work like we used to, we decided to open the engine to check what went wrong.

Your views are welcome. The pump was working very well.

TBF CUSTOM:This is a 500 cc Cast Iron RE Bullet. The work wasn't initiated by us. It came to us on a truck, in a conditi...
10/09/2026

TBF CUSTOM:

This is a 500 cc Cast Iron RE Bullet. The work wasn't initiated by us. It came to us on a truck, in a condition which was perilous to the life of the rider and in terrible condition, unridable!!!

It went back like this. And not a source of danger to the rider! Almost flawlessly finished by us!

09/09/2026

TBF CUSTOM SCRAMBLER:

We customised this 1974 Royal Enfield Cast Iron Bullet 350 to a Scrambler following the basic design of the 1965 British made Continental GT. This was only cosmetically customised.

07/09/2026

MAKING OF OUR CUSTOM SEATS:

We take a lot of trouble making our custom seats. Seat positioning on the chassis is most important!

We construct the sponge according to the height, weight and girth of the rider. Generally two or three layers of sponge involved before the final custom covers!!!

No we don't accept orders now as they take too much effort and time! Thanks for viewing!

75 YEARS BEHIND TIME:How many Magdynamo engines can you spot? No rocket science, no battling with the speed of light, no...
02/09/2026

75 YEARS BEHIND TIME:

How many Magdynamo engines can you spot?

No rocket science, no battling with the speed of light, no off-roading, no Armour 10, no breaking records!!! Pure Motorcycling at its impossible best!!!

Do you agree?

HAPPINESS IS:Having your own workspace to work on your motorcycles and other hobbies!We are indeed Blessed!
31/08/2026

HAPPINESS IS:

Having your own workspace to work on your motorcycles and other hobbies!

We are indeed Blessed!

Address

7, Vallalar Street, VGP Shanti Nagar, Pallikaranai
Chennai
600100

Opening Hours

Monday 9am - 7pm
Tuesday 9am - 7pm
Wednesday 9am - 7pm
Thursday 9am - 7pm
Friday 9am - 7pm
Saturday 9am - 7:30pm

Telephone

+918939972020

Website

Alerts

Be the first to know and let us send you an email when The Bullet Factory posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to The Bullet Factory:

Shortcuts

Share

Category