SRI Vishnu SAYEE

18/12/2014

Automatic trans fluid & filter:

In cars with conventional automatic or clutchless gearboxes, fluid is to the transmission what oil is to the engine in terms of function and importance. It fights friction and keeps things within safe operating temps. Ignoring it pretty much leads to the same issues: expensive repair bills at the mechanic. Fortunately, prevention is similarly easy. Check the fluid periodically, top off with the specific kind recommended in your owner’s manual and change it occasionally along with the filter.

When to replace: Every 2 years or 24,000 miles.

17/12/2014

Air filter:

Most often out of sight and out of mind, the air filter deserves better, and a place on your car part replacement calendar is a start. Try running with your hand over your mouth, and you’ll get an idea how much your engine depends on air. That air for the engine and airflow sensor still has to be free of contaminates, though, and that’s your air filter’s job. Be aware of manufacturer recommendations for replacing related airflow components like the PCV valve and oxygen sensor, if your car has them.

When to replace: 12 months, 12,000 miles or as needed.

17/12/2014

Power-steering fluid:

On your car-part replacement calendar, it doesn’t get much easier than where your power steering fluid is concerned. Still, give it proper consideration, since it lubricates the system and keeps the steering feel consistent. Periodic checks of the fluid are done with a glance at the reservoir or the dipstick inside it. Make sure you add only the manufacturer’s suggested fluid type and talk to a technician if the level drops considerably or you feel surges of resistance as you turn the wheel.

When to replace: Inspect level with every engine-oil change, top off as needed.

16/12/2014

Motor specialist:

Adjust Your Mirrors to Avoid Blind Spots:

16/12/2014

Rules of the Road:

• Don't assume a driver sees you. In fact, imagine that a driver can't.

• Run against traffic so as to view (and react to) any mistake an advancing motorist may make.

• At a stop sign or light, wait for the driver to wave you through—then acknowledge the driver with your own wave.

• Allow at least three feet between you and a passing vehicle.

• Be prepared to jump onto the sidewalk or shoulder of the road.

• During group runs, go single file when cars need to pass.

• Use hand signals to show which way you plan to turn.

• Respect a driver's right to the road.

• Run with proper ID, and carry a cell phone with emergency contacts taped to its back.

• Check with the police for local traffic rules.

• Make sure to look out for people pulling out of a driveway. They may not see you.

• At an intersection always wait and look for vehicles coming from multiple directions and lanes before attempting to cross.

• If you run with headphones, make sure you can still hear what is going on around you. Run with just one ear bud in at a time.

• In commercial areas, look out for high-traffic areas, such as the parking lots of grocery stores, restaurants, and bars.

• Watch for early-morning drivers who do not clear frost or morning dew off their windshields; they may not be able to see you.

• Wear bright and/or reflective clothing.

• Run only on roads with wide shoulders.

• Never cross against traffic lights.

15/12/2014

This page is all about sri vishnu sayee workshop

15/12/2014

15/12/2014

Lights:
One indicator or blinker is flashing faster than the other:

When you indicate one way and the blinker flashes quicker than when you indicate the other way, it means one of the bulbs has blown. An auto parts store will be able to tell you what sort of bulb you need to replace it with and your manual should show you how to get at the indicator bulbs - they're different on every car.

Don't touch the glass when changing headlight bulbs:

Most headlight bulbs now are filled with halogen and have special coatings on the outside of the glass. If you pick the bulb up by the glass with your fingers, you will leave trace amounts of oil and grease on the glass. When the bulb is used, that area of the glass will get hotter than the rest and it will eventually cause the bulb to crack. When changing headlight bulbs, only hold the metal bulb holder at the base, or make sure you're wearing rubber surgical / mechanic's gloves (clean ones) if you're touching the glass.

05/12/2014

Tire Safety and Maintenance:

The four tires on your vehicle are the only things separating you from the road. Are you giving them as much attention as they warrant? Proper tire inflation, tread depth, alignment and rotation can add up to a safer, more cost-efficient ride.

Tire Pressure

When it comes to tire pressure, you want to strike a happy medium. Over-inflated tires ride roughly and wear prematurely at the center of their tread. Under-inflated tires decrease fuel economy, cause imprecise handling, wear prematurely at the
edges of their treads, and can overheat and fail at highway
speeds.

What you can do

Check your vehicle’s tire pressures (including the spare) at least once a month, because tires typically lose about one pound of pressure per month through normal seepage.
For the most accurate reading, check tire pressures when the tires are cold.
Always follow the inflation pressure recommendations in your vehicle owner’s manual or on the tire information label located in the glove box or on the driver’s door jamb.
Do not use the inflation pressure molded into the tire sidewall; this is the pressure needed to achieve the tire’s maximum rated load capacity, and it may or may not be the correct pressure for your particular car.
Tires lose (in cold weather) or gain (in warm weather) about a pound of pressure with every 10-degree change in temperature.
The Bottom Line

Under-inflated tires contribute to more than 600 fatalities and 33,000 injuries annually, according to National Highway Traffic Safety Administration estimates, and they waste more than 1 billion gallons of gasoline each year, based on U.S. Department of Energy estimates.

Correct tire pressure ensures optimum vehicle handling for comfort and safety. And it will make tires last longer and help maximize a vehicle’s fuel economy.



Tire Tread Depth

Having good tires with sufficient tread depth is crucial for driving safety, particularly in wet or snowy road conditions.

What you can do

Check the tread depth of your car’s tires by inserting a quarter upside down into a tire groove. If you can see above Washington’s head at any point, start shopping for new tires.
Uneven or excessive wear of tire tread may indicate the need for suspension repair or wheel alignment, both of which will extend the life of your tires.
Worn tires with little tread are much more likely to hydroplane on wet pavement or lose traction in the snow, resulting in a loss of braking power and steering control.
The Bottom Line

Driving a vehicle with low tread depth puts you at increased risk for a crash. To slow the wear on your tires, keep them properly inflated and perform any needed suspension repairs or wheel alignments in a timely manner.



Tire Balance/Rotation and Wheel Alignment

Proper tire balance and regular rotation help maximize tire life and provide a safer driving experience by preventing uneven wear. Have the tire balance checked if you feel unusual vibrations through the steering or chassis, and rotate the tires at the mileage interval specified in your vehicle owner’s manual. If your tires wear unevenly, or the vehicle “pulls” to the left or right, it is time to have the suspension inspected and the wheels aligned.

03/12/2014

Oil Change Tips & Tricks:

There is no better way to prolong engine life and extend its efficiency than with regular oil changes. If you show your car the love firsthand, these oil change tips and tricks make it less of a chore.

Where to begin. Your owners manual will list the exact oil capacity for your engine, as well as specific weights of oil allowed or required. Remember that if differentiated, you will always want to choose the quantity denoted “with oil filter,” since filter and oil are being changed at the same time.

What you need. Wrench or socket with extension, a torque wrench, an oil filter and enough oil for the fresh fill and for topping off later. A drain pan, preferably a closed one, to collect the used engine oil. Car ramps or jack stands to work under. And of all things, a vinyl shower curtain liner.

Warm the engine. Warm oil flows easier, and you want as much of it as possible. A several mile drive, possibly to get the oil and supplies, will achieve this.

Keep it clean. Spilled oil can soak into and stain your garage or driveway. This is where the vinyl shower curtain liner comes in. They're cheap, cover a large surface area and keep your back clean. If you do spill some oil, the garage floor or driveway are safe. Just wipe the liner.

Use a torque wrench. Even if removing the oil filter drain plug was a sheer feat of strength, you will not want to retighten to oblivion. Use a torque wrench with the manufacturer’s recommended setting to confirm the drain plug will not leak, yet can still be loosened by mere mortals.

Seal the deal. A light coat of fresh oil around the new oil filter’s gasket will create a better seal and lessen the chance of leaks.

Keep spares. Having a extra quart or two of oil in the trunk will be crucial if you suddenly find the level low but don’t have access to the exact brand and weight when it is needed.

Get rid of it. If your city doesn’t have a program for accepting used motor oil, talk to a fleet manager. Many commercial garage buildings use waste-oil heating systems, so with some reassurance you haven’t added another fluid to the mix, they should be willing to relieve you of your oil.

01/12/2014

Want to know? Car Parking???

Angle parking
To practice parking at an angle, have your teen:

Signal and slow or stop the vehicle 6 - 8 feet from the parking space.
Check your blind spot on the side of the parking space for traffic and pedestrians.
Begin your turn when you can see the center of the parking space without your line of sight cutting across the parking line.
Move very slowly and turn the wheel sharply toward the center of the space. Once you enter the space, straighten the wheels and center the vehicle in the space.
Stop even with the curb or parking line.
Perpendicular parking
Help your teen practice the following approach to perpendicular parking:

Signal and get 6 - 8 feet from the parked cars or as far to the left of the lane as possible.
Check traffic behind you. Drive slowly and turn the wheel sharply to the right.
Check your right rear fender for clearance and straighten the wheel when you are centered in the space.
If necessary, shift to reverse and move back slightly turning the wheel to the left. Use a forward reference point to avoid hitting a curb.
Parallel parking
Help your teen practice the following approach to parallel parking:

Check the rearview mirror and signal. Stop 2 - 3 feet from the front vehicle and line up rear bumpers.
Shift to reverse. Look behind you while slowly backing into the space. Turn wheel fully toward the curb. When the vehicle is angled 45 degrees to the curb, and your front wheels align with the back wheels of the other car, straighten the tires and slowly back up in a straight line.
Check the front of your car to make sure it clears. When your left rear bumper is even with the rear vehicle left front bumper, turn wheels sharply left and continue to inch back.
When parallel to the curb, straighten the wheels and center your vehicle in the space.
To leave a parallel parking space, have your teen follow these steps:

Shift your car to reverse and inch back until you can see the front car’s rear tires.
Check your blind spot for pedestrians and traffic. Signal and yield to other traffic.
Turn your wheel sharply to the left and slowly pull out of the space.
Search your intended path of travel, turn off your signal and check your rearview mirror.
Parking on hills
To practice parking on a hill, ask your teen to:

Choose a legal space and signal. Check your review mirror and blind spots.
Apply the brake and approach parallel to and 12 inches from the curb. Make a smooth stop and shift into neutral.
Turn the wheels in the proper direction. If facing up hill with curb, turn wheels left, toward the roadway. If facing down hill with curb, turn wheel right, toward the curb.
Secure vehicle by shifting to park and setting your parking brake.