3Shulmotors_Official

28/05/2026

New display update is live. Please update it to the 1.1.2 over ota. Also new datalogger feature is added.

Headover to the hub.3shulmotors.com and generate api key and put it in the display under datalogger section. Then whenever you will connect with wifi the logs will sync to the dashboard.

Next week we are adding the multican support.
The bms support is a bit delayed as we are still testing all the options added. Will update soon on that.

We have also added display recovery tool in our hub so incase the display fails the ota you can recover it with the provided usb cable.

Let us know what else you would like to see next.

07/04/2026

🚀 3SHUL Display v1.2 — The Biggest Update Yet!

We've been heads-down building, and this one's packed. Here's everything coming in the next firmware update:

⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻

🔋 BMS Monitoring over Bluetooth
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Your display now talks directly to your BMS — no phone needed.

✅ Pack voltage, current, SOC — big numbers, always visible
✅ Individual cell voltages — grid view or bar chart, color-coded
✅ Supports up to 100 cells (36V builds to 400V+ high-voltage packs)
✅ 4 temperature sensors with overheat alerts
✅ Protection status, cycle count, capacity tracking
✅ Auto-detect your BMS brand — just scan and connect

📡 Supported BMS brands:
• JBD / Xiaoxiang / Overkill Solar / EG4
• ANT BMS
• Daly BMS (K/H/M/S series)
• More coming: JK-BMS, Seplos, and others

Pairing is saved on the display. Enable auto-connect and it reconnects every boot — zero setup after the first time.

⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻

🛞 TPMS — Tire Pressure Monitoring
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Real-time tire pressure and temperature from aftermarket BLE TPMS sensors.

✅ 2 tires (motorcycle/scooter) or 4 tires (car/ATV)
✅ Low pressure & high temperature alerts
✅ Guided calibration — install sensor, display finds it automatically
✅ Supports ZEEPIN, BR/TPMSII, DJTPMS sensors
✅ Dashboard widget shows all tires at a glance

Motorcycle riders get big, clean ring gauges for Front & Rear. Car/ATV users get a full vehicle diagram with 4 tire readouts and a pressure comparison bar chart.

⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻

📊 Data Logger — Record Every Ride
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
Built-in 10Hz data logger writes to the onboard SD NAND storage.

✅ Logs speed, voltage, current, power, throttle, temperatures
✅ Motor data: Id, Iq, Vd, Vq — perfect for tuning
✅ Toggle logging on/off from the touchscreen
✅ Auto-start option — begins recording as soon as you ride
✅ Configurable sample rate
✅ Storage usage bar and format option right in the UI

Every ride becomes a CSV file with timestamped data — import into Excel, MATLAB, or our cloud dashboard for analysis.

⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻⸻

☁️ Cloud Dashboard — Your Rides, Anywhere
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
When connected to WiFi, the display automatically syncs your ride logs to the 3SHUL Cloud.

✅ Auto-delete synced files to free up storage
✅ Sync status visible on the display (synced / pending / uploading)
✅ View ride history, speed graphs, power curves, battery discharge
✅ Access your data from any browser — phone, tablet, or PC

No manual file transfers. No pulling SD cards. Ride → Park → Data appears in the cloud.

Let us know what you want to see next. This update will be live by last week April. Stay tuned.

21/03/2026

Hello everyone. We have been working on a higher current controller for a long time, and we have finally tested our active parallel system, which enables us to design any controller from 1000 phase amps to 10,000 phase amps capable power electronics. We successfully tested our 3000 phase amps controller last week with great results. We will unveil the design after completing full design validation and post the results soon in the upcoming weeks.

We are looking for five interested beta testers for this product. The testers will receive the products at a discounted price and full end-to-end support to get this up and running, and they need to keep us updated on the parameters requested by us.

For the starting point, we will put the 3000 phase amps version into beta production. Priority will be given to people with the setup that can harness the most power from the setup.

20/02/2026

SUB 80MX is live ⚡💪 The ultra killer for Ultra Bee
Check it out on our website.

19/02/2026

Unleash the Power of your Light Bee ⚡💪⚡
65KW / 96nm Torque / 72-108v support
Meet the SLB 65MX - Built for speed and performance.

07/01/2026

The Hyper Kits for Light Bee Are Now Available for Order.

Experience unparalleled power output of 65kW on your Light Bee at an unexpectedly competitive price. Our motors feature all-CNC construction utilizing premium materials, including POSCO ultra-thin laminations for the stator and rotor. With less than 2mohm phase-to-phase resistance, conductive losses are minimized. A high-precision 4096-count encoder tracks even the slightest rotor movement, enabling optimized control algorithm adjustments for exceptional torque response. Enhanced thermal management is achieved through additional cooling fins. High-quality SKF rubber-sealed bearings rated for 20,000rpm ensure durability. Maximum working RPM reaches up to 14,000rpm (30s + field weakening). The motor casing features full CNC machining from 6063-T6 aluminum alloy.

Order now at: https://3shulmotors.com/product/hyper-light-bee-kit/

06/01/2026

Hyper light bee kit info is now live on website. We will start the orders soon.

If you have any questions or query regarding anything feel free to DM us we will try to respond ASAP.

Kits for surron Hyper Kits are engineered as adaptable power systems — tuned per vehicle platform. upgrade YOUR Light Bee SurRon Light Bee KIT Know More upgrade YOUR uLTRA Bee SurRon Ultra Bee KIT Coming Soon WHY HYPER KITS Hyper upgrades are not individual parts. Each combo is engineered as a com...

22/12/2025

Surron high performance upgrade motors.

22/12/2025

22/12/2025

Hyper for diy builds with onboard gearbox and 2.35 gear ratio.

22/12/2025

Hyper for light bee