26/05/2020
HYGIENE PLASTIC SHIELD FOR TAXIS
Size L suitable for vehicles with inner cabin pillars spacing of 125 to 140. cm and inner cabin height of 115 to 135 cm. A transparent shield separating the driver (front seats) and passenger (rear seats) compartments, with a slit on the driverβs side that can be opened to accept payments. Through the shield, without having to open it, contactless payments by card can be accepted. When properly installed, the shield creates a highly tight protection barrier in the car. Can be disinfected and cleaned with generally available disinfectant liquids and cleaning agents. Easy installation without tools with an industrial strength Velcro tape and a strong Velcro tape.
Installation:
The shield is installed behind the front seats on the central pillars and the inner part of the car roof. Clean, degrease and dry the central pillars of the car and the inside part of the roof between the pillars.
To ensure the desired adhesion strength, it is particularly important to thoroughly clean the inner surface of the roof (headlining), to which industrial strength Velcro tape will be stuck. Typical textile cleaners are well suited for this purpose however after the cleaning it is necessary to wash off the surface with clean water and dry the cleaned surface.
The packaging contains: hygiene shield, adhesive Velcro tape, Industrial Velcro tape, set of mounting hooks.
Material: PVC foil
NOTE! The adhesive bonding may be so strong that removing the industrial strength Velcro tape without damaging the surface to which it has been stuck may not be possible.
For more information
please contact +353894318997 or [email protected]