RMS Engine Building & Car Fabrication

RMS Engine Building & Car Fabrication Toyota JZ, 7M & Nissan Skyline RB engine specialist We build, repair and use Supras :)

Switch --->>>From a built R154 to Tremec T56 Magnum on a 2JZ MK3 Supra.
18/02/2026

Switch --->>>
From a built R154 to Tremec T56 Magnum on a 2JZ MK3 Supra.

Valentine’s Day, RMS style --->>>Some people fall in love with flowers.I fall in love with perfectly built engines.True ...
14/02/2026

Valentine’s Day, RMS style --->>>
Some people fall in love with flowers.
I fall in love with perfectly built engines.

True passion never leaks oil 😉🔧

Our newly introduced upgraded 10mm ARP head stud kit for BMW M52 and M54 aluminum engine blocks is now available in our ...
09/02/2026

Our newly introduced upgraded 10mm ARP head stud kit for BMW M52 and M54 aluminum engine blocks is now available in our webshop.
The key improvement is the extended block-side thread length: 34mm instead of the previous 24mm, allowing the stud to engage a significantly larger surface area inside the blind hole of the engine block.

This area has long been the main weak point of M52 and M54 engines.
With this longer threaded design, we have taken a clear step forward in overall reliability and durability.

Magnetic oil drain plug --->>>Is it a genius accessory or is it useless? Judge for yourself after checking these pics:- ...
08/02/2026

Magnetic oil drain plug --->>>
Is it a genius accessory or is it useless? Judge for yourself after checking these pics:
- 1st pic: A lot of metal contamination held by the magnetic oil drain plug
- 2nd pic: The paper element of the oil filter from the same engine, without any signs of contamination

06/02/2026

Nissan SR20DET RMS hand port

Tomorrow we’ll continue right where we left off today. The Nissan SR20DET drift race engine teardown/revision video goes...
02/02/2026

Tomorrow we’ll continue right where we left off today. The Nissan SR20DET drift race engine teardown/revision video goes on — next up is assembling the short block!

Normally, January and February are quieter, more relaxed months in company life — except for those serving the motorspor...
02/02/2026

Normally, January and February are quieter, more relaxed months in company life — except for those serving the motorsport community 😉
Once the last bite of bejgli is finally digested, the very first thought in a petrolhead’s mind is:
“What should I upgrade on the car this year?”

Alongside tuning, the start of the year is also maintenance season — because the most important thing is that the beast is in peak condition when it lines up at the start of the first race of 2026!

And this is where we come in — your best friends at RMS:
upgrade or maintenance?
You’ll find the parts you need with us!

#2026

How much can a 2JZ take??? →→When we recently started the SR20 engine rebuild with Zsolt from Junkbuilds, there was this...
31/01/2026

How much can a 2JZ take??? →→

When we recently started the SR20 engine rebuild with Zsolt from Junkbuilds, there was this sentence:
“I wouldn’t think you have something like this — tearing down an engine that’s been running for over 4 years…”
Well… here we go 😃 didn’t have to wait long — let’s add another layer on top.
After a heavily used SR20 drift engine, next in line is an even more abused one:
a 2JZ drift engine with even more mileage 😃
The ex Turbo Mafia Drift Taxi Lexus GS-300, now belongs to Adam Kerenyi European Drift champion - will get an engine rebuild after 6 years of "ab"use :D

Race gearbox getting healed at RMS 👉👉We received a GForce GSR gearbox for a little treatment. The gearbox had normal wea...
15/11/2025

Race gearbox getting healed at RMS 👉👉
We received a GForce GSR gearbox for a little treatment. The gearbox had normal wear, so it was time for a refresh.
This unit is a dogbox, straight-cut, H-pattern 4-speed race transmission coming from a turbo V8 drift car producing 1200+++ Nm.

We rebuilt the dog rings and the engagement teeth.
The Tilton release bearing also received a rebuild kit, and we installed an AN3 quick-disconnect fitting into the clutch line so the gearbox can be removed and reinstalled next time without any bleeding!

We also ordered spare parts for the gearbox, so the next revision — or even a mid-season repair — can be completed in just a few hours!

Just two kids playing with their toy ;)
11/11/2025

Just two kids playing with their toy ;)

"It was so long ago that it feels like it may have never even happened..."Toyota Supra MK4 1000+
09/11/2025

"It was so long ago that it feels like it may have never even happened..."
Toyota Supra MK4 1000+

Cím

Alsóörs

Telefonszám

+36309969379

Weboldal

Értesítések

Ha szeretnél elsőként tudomást szerezni RMS Engine Building & Car Fabrication új bejegyzéseiről és akcióiról, kérjük, engedélyezd, hogy e-mailen keresztül értesítsünk. E-mail címed máshol nem kerül felhasználásra, valamint bármikor leiratkozhatsz levelezési listánkról.

A Vállalkozás Elérése

Üzenet küldése RMS Engine Building & Car Fabrication számára:

Parancsikonok

Megosztás

Kategória