KRP

KRP Performance Racing Parts designed and manufactured for passionate driving.

NEW | Mazda MX-5 NC Billet Water Pump Pulley 💗Engineered for increased water pump speed and reduced rotating mass.▪️ +9....
29/08/2026

NEW | Mazda MX-5 NC Billet Water Pump Pulley 💗
Engineered for increased water pump speed and reduced rotating mass.
▪️ +9.5% Water Pump Speed
▪️ OEM: 400g → KRP: 234g
▪️ 41.5% Weight Reduction
The reduced pulley ratio increases water pump RPM by 9.5% at any given engine speed, helping increase coolant circulation — especially important in demanding track and drift applications.
• Increased water pump speed
• 166g lighter than OEM
• CNC machined from billet 7075 aerospace aluminium
• Direct replacement
• Designed for track & drift applications

Developed in Motorsport. Manufactured in Greece. Tested on Track.

Kawasaki zx10 quick access clutch cover for Andreas Salvanos
07/08/2026

Kawasaki zx10 quick access clutch cover for Andreas Salvanos

BMW E46 Steering Angle Kit 🔥Developed in Motorsport. Tested on track.Designed to deliver over 60° of steering angle with...
05/04/2026

BMW E46 Steering Angle Kit 🔥
Developed in Motorsport. Tested on track.
Designed to deliver over 60° of steering angle with maximum control and precision.

✔ Over 60° steering angle
✔ Improved steering response & transition
✔ Eliminates play with tight-fit rod ends
✔ Full bolt-on installation
✔ CNC machined from 7075-T6 aerospace aluminum

Built for real drift use — not just numbers.

📍 Manufactured in Greece
🏁 Tested in real track conditions

drifting motorsport cnc 7075 e46drift performanceparts

BMW E30 stage 3 angle kit with control arms68°+ OF REAL STEERING ANGLE.If you own an E30, you already know…Stock lock is...
21/02/2026

BMW E30 stage 3 angle kit with control arms

68°+ OF REAL STEERING ANGLE.

If you own an E30, you already know…
Stock lock is never enough.

Our new lock plates & control arms deliver:
▪️68°+ steering angle
▪️True Plug & Play fitment
▪️Optimized geometry for stability at full lock
▪️Built to handle real drift abuse

No cutting.
No guessing.
Just bolt on and go sideways.
Developed in Motorsport.
Tested on Track.

Honda CBX1000 turbo plenum with adaptors
29/01/2026

Honda CBX1000 turbo plenum with adaptors

AN10 Bulkhead AdaptorDesigned for safe and proper line routing through the vehicle or boat.▪️ The adaptor mounts from th...
09/01/2026

AN10 Bulkhead Adaptor

Designed for safe and proper line routing through the vehicle or boat.

▪️ The adaptor mounts from the inside of the car / hull
▪️ On the outside, the bulkhead fl**ge is installed
▪️ Standard AN fittings are then mounted on both sides

✅ Perfect for fuel / oil / catch can / cooling lines
✅ Clean motorsport look
✅ CNC machined
✅ Built for performance

Developed in motorsport. Manufactured for performance.

Billet thermostat adaptors for AN20
02/01/2026

Billet thermostat adaptors for AN20

Bmw e30- e36 front control arms billet adjustable lollipops ▪️ Adjustable caster ▪️ Solid billet design for zero flex ▪️...
27/12/2025

Bmw e30- e36 front control arms billet adjustable lollipops

▪️ Adjustable caster
▪️ Solid billet design for zero flex
▪️ Motorsport rod end bearing for better performance
▪️ Perfect for drift , track and performance builts
▪️ Plug and play for E30/e36

BMW E36 Stage 3 Angle Kit + Control ArmsNew drop from KRP.Want real steering lock? We’re talking over 60° of angle, prec...
09/11/2025

BMW E36 Stage 3 Angle Kit + Control Arms
New drop from KRP.

Want real steering lock? We’re talking over 60° of angle, precision and stability that lets you push your drift setup to the limit.

✅ Adaptors are CNC-machined from 7075 aerospace aluminum
✅ Control arms with corrected geometry, +30 mm wider than OEM
✅ With OEM rear bushings, caster is set at 5.5°
✅ Built for aggressive drift setups with proper self-centering

The complete kit includes:
• Angle adapters
• Control arms
• Polyurethane bushings
• Ball joints for the arms
• Inner tie rods (akrobara)

Your E36 will rotate like it’s on a whole new level. 🔧🔥
DM for availability and technical support.

#7075

Do you want to drift your Miata?The solution is here from KRP — the Stage 3 Angle Kit!It bolts directly onto the OEM knu...
07/11/2025

Do you want to drift your Miata?

The solution is here from KRP — the Stage 3 Angle Kit!

It bolts directly onto the OEM knuckles, which require only minor machining to fit the adapter.

Manufactured from aerospace-grade 7075 aluminum.

Camber is set at approximately -5.5° (it can be reduced by changing the camber bolts).

The tie rod needs to be shortened slightly to allow the outer tie rod end to thread in further.

Compared to the OEM 38° of steering angle, this kit increases it to over 55°, providing significantly greater steering lock and control and performance on track.

https://www.kakumaparts.com/product/mazda-mx5-mb-angle-kit-stage-3/

Address

Ελευθερίου Βενιζέλου 28
Metamórfosis
14452

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Telephone

+306978905981

Website

Alerts

Be the first to know and let us send you an email when KRP posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category