13/05/2026
We are DEEP in this 964 Project, and here's the update. We have an M97 Engine out of an 07' Cayman S 3.4L flat-6 paired with the original 964 G64 all-wheel drive transmission. We also had to buy a boxster transmission just so we could cut the bellhousing off the transmission to weld onto the G64 trans to bolt to the M97 engine. Now before there's an uproar 🛑🛑🛑🛑 the G64 transmission had previously been cut to bolt to a rando vw carbureted 4 cylinder, so this move was an absolute must. Also, the only thing good on this car is the shell, the ecu had water damage, and there was a ton of rust as seen in the pics. We had to sweep the rust out of the vehicle and we're not yet done. The goodies include a new AEM Infinity standalone ecu and a custom wiring harness. With all of this, we still have to map out the cooling system, drive-by-wire setup, and the integration of so many things, including the non-functioning brake system. Who peeped the 996 component we added? #964