J-Star Marine Services

01/09/2024

Price increase on products and labour, have kept increases to a minimum, however with raw material and labour cost we have had to increase them.

Boat repairs specialist in traditional clinker and carvel craft and many other traditional types of construction of motorboats and yachts.

17/08/2024

https://jstarboat.blogspot.com/2024/08/the-morgan-giles-30-at-next-boatyard-to.html

The Morgan Giles 30 at another boatyard near to my yard which has the equipment to install the engine and erect the mast and get it rigged ...

14/08/2024

https://jstarboat.blogspot.com/2024/08/the-morgan-giles-30-as-left-boatyard-to.html

Cleared the yard so that the transport could pick her up and load on their flat bed trailer The transport arrived on time and were soon read...

29/07/2024

https://restorationoftheclassicyachtmaistarii.blogspot.com/2024/07/mai-star-ii-inside-as-got-all-paint-off.html

Now that the most of the hull forward of the cockpit sole it can be coated with a mixture of boiled linseed oil and Cuprinol. This was a mi...

27/07/2024

https://jstarboat.blogspot.com/2024/07/the-morgan-giles-30-is-now-out-of.html

Setting the block and tackle to start the move out of the workshop into the yard. The headroom between the cabin sliding hatch was just 12mm...

25/07/2024

https://jstarboat.blogspot.com/2024/07/final-stages-of-making-cockpit.html

Some ofr the dfinal jobs to be done to the Morgan Giles 30 before it goes out into the yard to get put on to transport. Fitting the new wash...

21/07/2024

https://jstarboat.blogspot.com/2024/07/the-8-ft-dinghy-build-is-coming-along.html

The hull is now cured and removed from the mould ready for the next stage. Mould the two seats which are the buoyancy tanks for the boat On...

16/07/2024

https://jstarboat.blogspot.com/2024/07/the-morgan-giles-30-time-is-workshop-is.html

The Morgan Giles 30 is now having the final deck fittings fitted before it goes outside into the yard. The only job we have to do before she...

30/06/2024

https://jstarboat.blogspot.com/2024/06/new-build-dinghy-getting-laid-up-and.html

The new dinghy getting hand laid up with the second of four layers of 450g CSM and then it will released from the mould and the seats will...

25/06/2024

At last got a couple of young men to help with some of the jobs around the yard, they are on a trail basis to see how they work out

08/06/2024

The hull to deck edge doubly sealed and now just the ind=side edge to do.

The hull to deck joint on the Morgan Giles 30 now doubly sealed along the outside edge and now just got to seal the toe rail to deck joint a...