20/06/2026
LS3 Bumfluffery!!🤪🤪
Just some stuff I’ve been playing with on my own LS3 project. Chamber mods , some port work, nothing crazy, as this is a street deal, also a stick car with 8 stack!
Will be on terminator x max. Strictly running on 99RON.
Also these groove mods are little known, and definitely not of my own founding. These mods were invented by a guy named singh and are patented. They are a mod that dose a couple of things , they help keep detonation @ bay especially on high compression ratio engines, they also create a lot of swirl and turbulence in the chamber which mixes the fuel more, which in turn makes more power as the fuel burned is of an equal mix. Also when the flame front travels out from the spark plug into the hard to reach quench area the fuel is mixed and an even burn 🔥 is achieved. Also a more uniform idle and more torque was noted. Take from it what you will, I’m always of the opinion that if the theory seems plausible I’m always willing to give it a try. There are a few guys in the states that run top championship winning cars using this mod. Both N/A and Turbo,So the sun is shinning an I say let’s suck it and see. Eh !!!
I’ll post. Up some vids of doing the grooves on the Bridgeport.
Hope you Enjoy people. 💪 have a great weekend,its HOT HOT HOT.
