LDS Engineering

  • Home
  • LDS Engineering
Directions Website Contact the business

LDS Engineering Small machine shop. Independent supplier of classic & modern Ford engine components. Oval race formula engine components. Custom gasket manufacture.

Independent trade supplier of:

Gaskets sets
Head gaskets
Inlet/exhaust gaskets
Sump gaskets
Rocker gaskets
Cylinder head bolts
Valves
Valves guides
Piston rings
Cambelt kits - Cambelts - Tensioners
Timing chain kits
Waterpumps
Aux belts
Bosch - Denso - NGK spark plugs
Beru - Ultraglow glow plugs

Custom gasket manufacture

Cylinder head refacing / skimming

Vehicle servicing
MOT`s arranged
Welding
Car Collection
Trade vehicle disposal / Sales

Large delivery of gaskets turned up today, so lots are back in stock along with the Ford 2.9 12v + 24v V6 water pumps. B...
10/11/2026

Large delivery of gaskets turned up today, so lots are back in stock along with the Ford 2.9 12v + 24v V6 water pumps.

Been having a big sort out in the workshop the last 10 days, purchased a load of new work benches to mount the machinery on so getting the place tidy and more organised. I was lucky to be given a set of heavy duty cylinder head pressure test plates, so in the process of designing and building a fixed pressure test rig. I`m also in the process of wiring the smaller swing arm grinder up so I have a dedicated machine for refacing flywheels. Until the new crankshaft/flywheel/pulley dynamic balancing machine arrives it will be refacing only, no lightening.

Brake disc grinder is now at the docks ready to load on to the cargo ship so barring any issues with customs it should arrive end of December.

I`m getting quite booked up with jobs already with the run up to December so if you require a cylinder head refreshing this side of Christmas drop me a DM or ring up and get it booked in sooner rather than later to avoid disappointment.

I have a terms and conditions listed on EVERY single webstore, Ebay shop and Ebay listing showing full estimated process...
04/11/2026

I have a terms and conditions listed on EVERY single webstore, Ebay shop and Ebay listing showing full estimated processing and delivery times.

There is zero excuses to be messaging me moaning about your order not turning up when it was placed 3.10pm on a Friday afternoon expecting it to be there Saturday. I work my bo****ks of rushing about to try and get orders out same day if they are placed BEFORE the midday Royal Mail business collection.

This order was placed via the main ECP store, I do not have a phone number listed for the core plug side of things and made it purely email only, mainly because I had every man and his dog calling me wanting to know the sizes of specific core plug sets and then buying elsewhere. So I refused to be a free information service.

Anyone that know me knows I go the extra mile for customers. But c*nts like this really get my fu***ng goat. Do your research everything is listed on the stores in black n white and if you need guaranteed next day delivery..........do both of us a favour and go buy elsewhere!

I`ve seen and setup some cylinder heads over the years, but never have I had one come in like this......... Fairly moder...
28/10/2026

I`ve seen and setup some cylinder heads over the years, but never have I had one come in like this.........

Fairly modern Nissan Qashqai 1.3 16v HR13DDT direct injection, took longer to set the bloody thing up than skim it! Luckily I have a rollover fixture for a BMC A series that I managed to modify.

Hope I don`t get anymore of these in the door too soon 😂😂😂

The new manifold refacing machine arrived on a pallet this morning. I managed to assemble most of it but due to time con...
27/10/2026

The new manifold refacing machine arrived on a pallet this morning. I managed to assemble most of it but due to time constraints trying to get orders out and also had a skim to do on this Vauxhall 1.4 16v Z14XEP that come in from a local customer, it should be finished and working tomorrow.

But I can now reface manifolds up to 800mm in length and 120mm width 👍

26/10/2026
Anyone interested in this before I stick it on Ebay?No idea on price, but would be nice to see it saved and used rather ...
22/10/2026

Anyone interested in this before I stick it on Ebay?

No idea on price, but would be nice to see it saved and used rather than export.

Was my old truck which I gave to the oldman when we were working together. Been sat in the yard since his stroke. Put a fresh battery on and fired straight up.

Used to be #295 old truck, so its been all over the country racing back in the day.

L reg 1994 mk4 with smiley lights/bonnet
170k - Always serviced regular and had cambelt/waterpump/head gasket before being parked up. You might want to at least stick a new belt on it.
Pump has been turned up
EGR blocked
Leak off mod
Mitsubishi L200 rear springs and uprated bump stops.
14 foot bed with steel ramp
Comes as pictured with A bar, light bar, spotlights, boxes.
Had new arches, steps and sills while we had it.
Got a bits and pieces engine and spare rear axle/diff to go with it.

Bad bits
Husky winch needs looking at but remote and solenoid are there.
Obviously needs a valet and good hose down.
Will need at least N/S sills patched, O/S inner battery tray, O/S inner arch
Paint is peeling in places so its gonna need a respray.

Based in Farnham, Surrey if you want to view it........you wont be driving it away, you'll need a big trailer or a lorry to collect it.

Drop me a DM on here work phone isnt on this week.

Purchased another new machine to bring back a service that I`ve not been able to do for the last year..........Skimming ...
21/10/2026

Purchased another new machine to bring back a service that I`ve not been able to do for the last year..........Skimming / refacing inlet and exhaust manifolds.

Have refaced various O.E, aftermarket and custom made ones over the years, but the old machine would only do a maximum of 100mm wide x 450mm long which only covered up to Land Rover TD5 or VW 2.4/2.5 5 cylinder manifolds . The new machine I`ve just ordered can do 150mm wide x 950mm long! So covers most straight six applications and everything in between.

Machine should be here early next week, customers are more than welcome to courier the manifolds to me and arrange re-collection or I can send back with DPD.

Just placed a order for a brand new 2026 model liquid cooled grinding machine for refacing brake discs. The machine is b...
19/10/2026

Just placed a order for a brand new 2026 model liquid cooled grinding machine for refacing brake discs. The machine is being made to order so I will be taking delivery just after Christmas.

It will mean I can achieve a O.E crosshatch finish on automotive discs with a increased diameter of 400mm and 40mm vented width. Ideal for refacing warped discs, bedding in new pads or just refreshing discs that have been sat and pitted. The older machine I will keep in service for main classic/vintage discs and drums.

Mk7 Fiesta rear light gaskets were a complete success! So I will be trying to stock the full range of classic Ford rear ...
07/10/2026

Mk7 Fiesta rear light gaskets were a complete success! So I will be trying to stock the full range of classic Ford rear light foam seals / gaskets in the coming weeks.

I have sourced many original foam gaskets for a lot of models, but I may be some short. Once I know what I`m missing I`ll put a list up of what rear light units I`m looking to purchase 👍

I`ve just been through some more deliveries this morning and found another two large boxes of composite exhaust gasket m...
06/10/2026

I`ve just been through some more deliveries this morning and found another two large boxes of composite exhaust gasket material 🤦‍♂️

For a limited time so I can free up some storage space - x6 piece Ecotec gasket set for £16.50 delivered.

Can be used with 1.4 16v or 1.6 16v ECOTEC`s (X14XE/Z14XE/X16XE) so 1400 stockcars or 1600 bangers

x2 Inlet gaskets of your choice (Bubble / Triangle / Oval shape – leave message at checkout and let us know which type you require)

x2 Exhaust gaskets (composite material type - fibre/steel/fibre)

x2 downpipe gaskets (composite material type - fibre/steel/fibre)

This offer is only available via the main store ⬇⬇⬇⬇⬇⬇⬇⬇⬇

https://ldsengineering.co.uk/product/vauxhall-1-4-16v-1300-stockcar-1600-banger-inlet-exhaust-downpipe-gaskets-bundle-x6-special-offer/

Address


Opening Hours

Tuesday 09:00 - 17:00
Wednesday 10:00 - 17:00
Thursday 10:00 - 17:00

Alerts

Be the first to know and let us send you an email when LDS Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to LDS Engineering:

Shortcuts

  • Want your business to be the top-listed autos & automotive service?

Share