PBS Engineering Ltd

Call Directions Website

PBS Engineering Ltd PBS Automotive Engineering is focused on performance engines, motorsport preparation and restoration.

We carry out specialist engineering work on all types of high performance engines and are able to undertake all forms of motorsport preparation on any make of car, we specialise in Ford and the more unusual kitcars. Services include engine building, specialising in Ford zvh engine and zetec turbo engine building as well as the Ford crossflow 'kent' engine. At PBS Engineering each engine is hand assembled in our engine build workshops with the utmost care and attention to detail. Every engine build uses the highest quality components ensuring the highest reliability and performance of an engine. In house facilities allow us to fabricate parts from simple brackets to full chassis preparation including shell seam welding and race car preparation, also full restoration work is undertaken. All forms of motorsport preparation including fabrication, chassis modifications, suspension enhancement and brake upgrades. At our kilmarnock workshop we can provide a wide range of specialist engineering services including welding of mild steel, stainless steel, and aluminium in MIG and TIG. All types of fabrication work undertaken for projects of any nature.

Big Autumn Sale time! Having a massive clear out of the storage unit - everything going - so feel free to pop along and ...
15/09/2026

Big Autumn Sale time! Having a massive clear out of the storage unit - everything going - so feel free to pop along and fill your baskets 😁

We’re open 7am - 4pm every day, if there’s anything that you see and are to far away to visit we can arrange postage, after next week it all goes on eBay and after that it will be going out..

Ford Es**rt Mk4 RS Turbo parts, panels, interior, Mk1 Mondeo , Orion Rear Light Fittings and gaskets, Focus Mk1, Ford Xflow parts, Nitrous Kit, Alloy wheels (ST170, ST170 space savers, Peugeot 17”, RST 15” and a white 15”x7” et0 Revolution) plus some Transit parts.
Hope you’re all having a great week folks 😁👍🏻

if you need assistance with any vehicle servicing, fabrication, repair work or building a project we can help...
please feel free to get in touch to see what we can do for you:

📞 - 07716200222
🖥️ -
📧 - [email protected]
📍 - PBS Engineering Unit 1A, Lugtonridge, Lochlibo Road, Burnhouse, Beith, KA15 1LE

**rt **rtmk4 **rtrsturbo

on the series2 - modifying the es**rt base to hold the focus ST225 wiper motor, this just involved moving the hole pit...
09/09/2026

on the series2 - modifying the es**rt base to hold the focus ST225 wiper motor, this just involved moving the hole pitch for the three mounting bolts and making a shim for one of the bolts… it will be trial test once it’s wired in to set the park position but it’s all part of the challenge of the transplant 😄.

Hope you’re all having a great week folks 😁👍🏻

if you need assistance with any vehicle servicing, fabrication, repair work or building a project we can help...
please feel free to get in touch to see what we can do for you:

📞 - 07716200222
🖥️ -
📧 - [email protected]
📍 - PBS Engineering Unit 1A, Lugtonridge, Lochlibo Road, Burnhouse, Beith, KA15 1LE

**rt **rtmk4 **rtrsturbo

making up some custom strut braces, the triangulated brace is for a rear mount that will go for powder coating before ...
05/09/2026

making up some custom strut braces, the triangulated brace is for a rear mount that will go for powder coating before it goes in, and while I had the board setup I thought I would fettle the cross-brace that toms_garage_82 supplied me many moons ago for the back of the series2 😎👌🏻, it fits perfectly between the rear shock towers and should strengthen the rear of the shell….
…. just need to clear the car out so I can get it welded in 😂 .

Hope you’re all having a great weekend folks 😁👍🏻

if you need assistance with any vehicle servicing, fabrication, repair work or building a project we can help...
please feel free to get in touch to see what we can do for you:

📞 - 07716200222
🖥️ -
📧 - [email protected]
📍 - PBS Engineering Unit 1A, Lugtonridge, Lochlibo Road, Burnhouse, Beith, KA15 1LE

**rt **rtmk4 **rtrsturbo

… just made some reinforcement bars for the front of the series2 so it can go in the roll-over-jig for when it’s turn...
29/07/2026

… just made some reinforcement bars for the front of the series2 so it can go in the roll-over-jig for when it’s turn for restoration comes around, having had to cut out quite a substantial portion of the inner wings to get the focus ST225 5-pot shoehorned into the bay, I wanted to get some strength back in before it’s hung on the rotisserie 😁 might sheet metal the gearbox side in eventually but the crank pulley end will be left open to aid maintenance - hopefully the arch lines can be modified to fit back in once it is finished 🤔🙂

Hope you’re all having a great week folks 😁👍🏻

if this is something you would be interested in having done for your project … or if you need assistance with any vehicle servicing or repair work we can help...
please feel free to get in touch to see what we can do for you:

📞 - 07716200222
🖥️ -
📧 - [email protected]
📍 - PBS Engineering Unit 1A, Lugtonridge, Lochlibo Road, Burnhouse, Beith, KA15 1LE

**rt **rtmk4 **rtrsturbo

with the series 2 getting some rare Scottish sunshine ☀️😂a bit of a . . . moving the workshop around for a new ramp ...
17/07/2026

with the series 2 getting some rare Scottish sunshine ☀️😂

a bit of a . . . moving the workshop around for a new ramp I had to punt the es**rt outside while we sorted everything out.

Hope you’re all having a great week folks 😁👍🏻

if you need assistance with any vehicle servicing, fabrication, repair work or building a project we can help...
please feel free to get in touch to see what we can do for you:

📞 - 07716200222
🖥️ -
📧 - [email protected]
📍 - PBS Engineering Unit 1A, Lugtonridge, Lochlibo Road, Burnhouse, Beith, KA15 1LE

**rt **rtmk4 **rtrsturbo

… todays welding job - DPF flexi renewal on a BMW 1series what a glorious day to be welding ☀️ 🥵 😂Hope you’re all havi...
10/07/2026

… todays welding job - DPF flexi renewal on a BMW 1series

what a glorious day to be welding ☀️ 🥵 😂

Hope you’re all having a great week folks 😁👍🏻

if this is something you would be interested in having done for your project … or if you need assistance with any vehicle servicing or repair work we can help...
please feel free to get in touch to see what we can do for you:

📞 - 07716200222
🖥️ -
📧 - [email protected]
📍 - PBS Engineering Unit 1A, Lugtonridge, Lochlibo Road, Burnhouse, Beith, KA15 1LE

Good day everyone, we are selling our projects to fund a house deposit, we will be making detailed listings later but if...
30/03/2026

Good day everyone, we are selling our projects to fund a house deposit, we will be making detailed listings later but if anyone that has been following the builds, has any interest in these please feel free to message or call us.

1989 Ford Es**rt series2 RST Turbo (unfinished project).

1994 Ford Mondeo 4x4 (unfinished project).

Kitcar “7” type (going for MoT on the 15th April).

Hope you’re all having a great Monday folks 😊👍🏻

As always if there is any engine work, fabrication, machining or welding work you would be interested in having done for your project … or if you need assistance with any vehicle servicing or repair work we can help...
please feel free to get in touch to see what we can do for you:

📞 - 07716200222
🖥️ -
📧 - [email protected]
📍 - PBS Engineering Unit 1A, Lugtonridge, Lochlibo Road, Burnhouse, Beith, KA15 1LE

**rtrsturbo **rtmk4 **rt

a bit of a . . . finally standing back and seeing the focus st225 engine sitting on its own mounts in the series 2’s e...
06/03/2026

a bit of a . . . finally standing back and seeing the focus st225 engine sitting on its own mounts in the series 2’s engine bay is a major milestone 😊.

A custom made o/s engine mount, a flipped and reversed st170 gearbox mount welded to the n/s inner wing and a GGR / vibrotecnics torque bar mounted to the underside of the passenger footwell.

It’s been great to blow the dust off the ol’ red express but it’ll be getting stuck back in the corner of the workshop for the foreseeable future ☺️

Hope you’re all having a great week folks 😁👍🏻

if this is something you would be interested in having done for your project … or if you need assistance with any vehicle servicing or repair work we can help...
please feel free to get in touch to see what we can do for you:

📞 - 07716200222
🖥️ -
📧 - [email protected]
📍 - PBS Engineering Unit 1A, Lugtonridge, Lochlibo Road, Burnhouse, Beith, KA15 1LE

**rt **rtmk4 **rtrsturbo

- fabricated engine mount for the focus st225 5-pot engine in the es**rt RS Turbo . . . we needed something compact an...
02/03/2026

- fabricated engine mount for the focus st225 5-pot engine in the es**rt RS Turbo . . . we needed something compact and strong to replace the bulky oem mount . . lathe’d up some steel pillars from 32mm round bar and custom made the mount from 3mm plate so it should be plenty strong 😉.

Hope you’re all having a great Monday folks 😊👍🏻

if this is something you would be interested in having done for your project … or if you need assistance with any vehicle servicing or repair work we can help...
please feel free to get in touch to see what we can do for you:

📞 - 07716200222
🖥️ -
📧 - [email protected]
📍 - PBS Engineering Unit 1A, Lugtonridge, Lochlibo Road, Burnhouse, Beith, KA15 1LE

**rtrsturbo **rtmk4 **rt

on the project … a custom made billet aluminium adapter with a mk3 mondeo v6 thermostat housing TiG’d on … for the j...
26/02/2026

on the project … a custom made billet aluminium adapter with a mk3 mondeo v6 thermostat housing TiG’d on … for the jaguar coolant outlet that will avoid the mondeo mk1 gearbox mount.

Hope you’re all having a great week folks 😊👍🏻

if this is something you would be interested in having done for your project … or if you need assistance with any vehicle servicing or repair work we can help...
please feel free to get in touch to see what we can do for you:

📞 - 07716200222
🖥️ -
📧 - [email protected]
📍 - PBS Engineering Unit 1A, Lugtonridge, Lochlibo Road, Burnhouse, Beith, KA15 1LE

Address

PBS Engineering Ltd, Unit 1A Lugtonridge Farm Lochlibo Road Burnhouse
Stewarton
KA151LE

Opening Hours

Monday 8am - 4pm
Tuesday 8am - 4pm
Wednesday 8am - 2pm
Thursday 8am - 4pm
Friday 8am - 2pm

Telephone

+447716200222

Website

Alerts

Be the first to know and let us send you an email when PBS Engineering Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category