Vincent Motorcycle Spares and Parts

Vincent Motorcycle Spares and Parts Specialising in the supply of Top Quality new Spares and Parts for Vincent Motorcycles.

Vincent Petrol Tank. For sale on behalf of a customer. Has not seen the road since having a new expensive paint job a wh...
27/09/2023

Vincent Petrol Tank. For sale on behalf of a customer. Has not seen the road since having a new expensive paint job a while back. £1250.00 ONO. Call me on 07770 788005 to discuss.

Vincent Wheels. For sale on behalf of a customer. Both rebuilt with new Rims, Spokes & Tyres. £900.00 each ono. Call me ...
27/09/2023

Vincent Wheels. For sale on behalf of a customer. Both rebuilt with new Rims, Spokes & Tyres. £900.00 each ono. Call me on 07770 788005 to discuss.

My new bench set up is starting to earn it's keep a bit now with the first few jobs rolling off it. Not literally rollin...
13/12/2021

My new bench set up is starting to earn it's keep a bit now with the first few jobs rolling off it. Not literally rolling off it though. A Twin Crankshaft assembled and trued up, a pair of Cylinder M**fs fitted with new plus 30 O/D Liners, a new G2 plate fitted with new Bearings and G38 bush, a Cylinder M**f and Liner separated to check the interference fit and a front Cylinder Head ready to be stripped out for assessment. Not touched the Magneto parts yet. They are all Lucas K2F from BSA A10's and they all need the outer bearing races removing before they go off for vapour blasting along with about a dozen other K2F bodies that have already had the Bearing Races removed.

I've been looking for a bit more bench space for a while now. This wall in the workshop was fully racked out floor to ce...
30/11/2021

I've been looking for a bit more bench space for a while now. This wall in the workshop was fully racked out floor to ceiling so I outed all the racking and I've just finished setting it up like this. My press went in first followed by the bench on the left which I made many years ago and which has occupied space in the middle of the workshop floor for several years. I put my oven in the middle and built the extra bench space I had been looking for over the top of it including the narrow rack to the right of the oven. It was all done using bits of Steel Angle, Plate for the bench top and 3/4" plywood that has been kicking about for years so all it cost me was a few welding rods. I also knocked up the wall rack on the left and the wooded battens on the wall will support two more racks when I get round to making them. I'm hoping to find time to do this between Christmas and the new year when I'm supposed to be enjoying myself. Oh wait a minute I will be enjoying myself doing this. I guess I should also be thinking about filling in the cracks in the floor while I'm at it.

A Vincent Twin which was in for repairs under the kickstart cover.
24/11/2021

A Vincent Twin which was in for repairs under the kickstart cover.

A replica Egli Vincent frame and swinging arm from a small batch that I commissioned some years back. I'm considering ge...
23/11/2021

A replica Egli Vincent frame and swinging arm from a small batch that I commissioned some years back. I'm considering getting some more made next year, possibly even doing them in house. It probably won't be until mid year though as I have another big project starting to come together and I'm hoping to be able to start posting about that in the new year.
I try to keep over a thousand different parts in stock for Vincent Motorcycles, all top quality and mostly made in England. If there is anything that you need please get in touch by email, phone or text.

A pair of new Vincent heads fully fitted out and ready to be returned to their owner. All Cylinder Head parts are on sto...
22/11/2021

A pair of new Vincent heads fully fitted out and ready to be returned to their owner. All Cylinder Head parts are on stock including Vincent and HRD embossed inspection caps. If there is anything you need please email, Call or text me.

Some photo's of a Vincent Black Shadow rebuild I did quite a few years ago. They were taken on the day the bike went bac...
21/11/2021

Some photo's of a Vincent Black Shadow rebuild I did quite a few years ago. They were taken on the day the bike went back to its owner, fellow local VOC member and good friend of mine Paul. The bike came to me following an accident Paul had whilst riding to our annual October VOC club intersection meeting at Bawtry. It was a low speed accident when a car pulled out on Paul as he was entering the Bawtry 30MPH limit and knocked him off his bike. No really serious damage done but quite a lot of scratches, scrapes and dents etc. Paul has since passed away (RIP my friend) and the bike is now owned by a fellow local VOC member Ben. I think It's really good that the bike stayed local as Paul had owned it for many years and had originally purchased it from VOC member George Petch of Grimsby in the days when George was dabbling in Vincent's before he got seriously involved with modern bikes as George Petch Wheels of Grimsby. (Main Honda and Suzuki dealer). George has also passed away now. Sadly another friend lost. RIP George.

A pair of new Vincent Twin Crankcases which have been fitted out with Spindles, Oil Pump, Main Bearings and Gearbox Bear...
20/11/2021

A pair of new Vincent Twin Crankcases which have been fitted out with Spindles, Oil Pump, Main Bearings and Gearbox Bearings. The crank has previously been fitted and centred up. Now it's time for final assembly and the cases closed. If you need any Crankcase or Crankshaft reclaim work doing please get in touch.

Two pieces of kit that I use when truing up Vincent Cranks.
19/11/2021

Two pieces of kit that I use when truing up Vincent Cranks.

This is my new, and very expensive, Sunnen Honing Mandrel for Vincent Big end Eyes. Over £700.00 and a four month wait f...
18/11/2021

This is my new, and very expensive, Sunnen Honing Mandrel for Vincent Big end Eyes. Over £700.00 and a four month wait for it to arrive from the States due to material supply problems over there. Still its here now and will be put to good use on a small backlog of Conrods. If you need any Crankshaft rebuild work doing please get in touch.

A pair of new Vincent heads just in for fitting out. As you can see by the photo's a lot of parts go into Vincent heads....
19/09/2021

A pair of new Vincent heads just in for fitting out. As you can see by the photo's a lot of parts go into Vincent heads. If your needing any Cylinder Head parts or any other engine parts please email me or call/text me on 07770 788005. I try to keep around a thousand different top quality Vincent parts in stock mostly Made in England.

Address

Scunthorpe

Telephone

+447770788005

Website

Alerts

Be the first to know and let us send you an email when Vincent Motorcycle Spares and Parts posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Vincent Motorcycle Spares and Parts:

Shortcuts

Share

Category