DJM Race Preparation

22/07/2026

the front of the F1 Es**rt was always going to be tight , twin radiators to keep the F1 theme , Spal brushless fans, carbon duct work and room for some airbox inlet noise 😃😃,
the car will use carbon carbon brakes and the task to find an off the shelf wheel , proved impossible ,so the decision was made for us to design and make the centre lock 17" wheels in house , the front geometry can then be fully optimized with no constraints ,😎😎😀😀😀

14/07/2026

we always thought the MST MK1 EVO was going to be something special , we were wrong its absolutely spectacular from front to back , a total credit to the boundary pushing MST team 😍😍😍😎😎😎😎
https://www.facebook.com/share/r/14hjen5MhDa/

24/06/2026

scanning to reverse engineer, is a tool we frequently use , but always forget to highlight😎😎😎😜

04/06/2026

A very busy few months 👍👌😎

25/02/2026

Update on the F1 Es**rt , we've designed and manufactured the front subframe , dummy engine mounts/plates , strut tops to allow the rollcage to tie in and with this the front geometry of the car ,
We have finalised the suspension design which is to include carbon -carbon brakes front and rear , so we are now planning to manufacture the wheels to control brake clearance, more info on this to follow ,
This project is certainly using every facet of our 'imagineering ' buisiness 👌👌😎😎

08/12/2025

Well engine Royalty has entered the building , after a very frustrating few months , trying to source BMW motorsport P65 parts for the S65 v8 and getting nowhere , the decision was made to go all in and fit an F1 engine into the Es**rt project, that being a Judd CV 3.5 V8 originally fitted to the Leyton House March-Judd 881, we have even managed to borrow a dummy engine whilst the actual engine is being fully rebuilt, we have also sourced period ex F1 parts to keep the theme for the F1 Es**rt,😎😎
lots and lots of work to do but can you imagine the noise !!! 😁😎😁
https://www.lasterabrand.com/a/blog/adrian-neweys-1st-f1-car-the-leyton-house-march-judd-881

30/10/2025

A little bit later than usual , but our R53 is back on the street, sporting it's new livery 🤩🤩👌👌👍👍

23/09/2025

Just incase you've ever wondered what £6k worth of 2014, 7075 and 6082 T6 aluminium looks like before we turn it into race car , suspension, transmission and ancillaries 🤔👌😎

07/08/2025

here we have one of our fully imagineered creations , the classic Mini ' A series ' 5 speed sequential gearbox ,named the JTS-5,
it is a clean sheet of paper design , for all motorsport applications, race ,rally ,Hillclimb and even a land speed record mini ,
as with all of our gearboxes it uses aerospace materials and consumables throughout ,
whilst the gearboxes once tested will be made in house, they will only be available through the backer and innovator , the details of which will follow once the product is released for sale 😎😎😎😀

27/03/2025

following on from our January KA post ,this is a Vid from TEC on the second one built at the same time ....

This Ford KA with a YB Cosworth engine and full Sierra Cosworth 4x4 running gear is something you don’t see every day. Custom fabrication, AWD grip, and 300H...