Turn 12 Fabrication

10/10/2026

Molton’s 316 3.5” Evo system built and re fitted before its off to Norris Designs for dry-sump plumbing and final commissioning. This is a serious build. Billet block.Twin charged. Sequential. Ohlins the lot you name it.

10/10/2026

Molton’s 316 3.5” Evo system built and re fitted before its off to for dry-sump plumbing and final commissioning. This is a serious build. Billet block.Twin charged. Sequential. Ohlins the lot you name it.

21/09/2026

We recently had the pleasure of extending some bmw e30 lower arms for Harjun Singh new 190e 2jz build, tasked with jigging up the e30 evo lower arms as a datum picking up the caster center line and holding this reference whilst cutting and extending the new stock e30 arm and then to task us further we extended these by Harrys magic number to add some camber ( we won’t disclose this as it’s his own workings out and setup) safe to say these are far safer than what’s currently out there with no doublers or multiple passes, we look forward to seeing the finished build, if you haven’t already go follow his pages the builds are very special. Been a pleasure being a part of both builds so far ! 🏁

29/06/2026

Something a little different we had in recently. Tasked by kester cook a long serving customer who set us the idea of a toe adjustment fiesta st rear beam. With us both being pleased and happy with the adjustment outcomes now available to setup the car we are happy to share this post and further offer this as a service should anyone be interested.

Fully Tig welded and CDS tube used througout

Turn 12 fabrication.

25/12/2025

Merry Christmas to all of our customers we appreciate every single order / drop in small weld repair / large scale project and on going product developments we wish you all the success,health and a happy new year !

12/12/2025

A little step by step process into our crack check and repair services. This can be for a peace of mind for yourself whilst you maintain your pride and joy or for something more obvious like the component below. This is available for any Hot side or Cold side engine component.

Watch the crack indicator develop during the recommended dwell time… this cracked primary is rather large which did in-fact develop out to be a full circumferential break.

We later checked the manifold over in full after the repair was completed resulting in no further indications.

-Charge pipes ✅

- Inlets ✅

-Downpipes✅

-Waste-gate discharge pipes ✅

- NA manifolds ✅

- Turbomanifolds ✅

- Fuel cells ✅ the list goes on …

Drop us a message for this service and any other through either of our social platforms.

23/10/2025

The ever popular ep3 evap location an6 swirl pot going out today for the high power return fuel rail setups 👌😎

Fully tig welded hand built by T12 in the UK 🇬🇧

06/09/2025

19/05/2025

Sorry for the lack of posts recently ! However the website has been worked on to be made a bit more user friendly and include a half dozen new parts, go check it out and even buy something

There will be a pre fab category soon for silencers / end caps / flanges / fixings etc

Many thanks - turn 12 fabrication

12/09/2024

Adams Porsche GT4 first visit to us for a typical Adam service of knocking down some Db’s for black flag free track days / events

After a pre inspection we decided the current exhaust needed a repack, even by ear sounded empty, loose and baked. This is exactly what we found when we cut them open.

We also found a pair of flanges to have no gasgets fitted and appeared to be leaking heavily. So they were sorted with new hardware and fresh gasgets and flanges locking nuts for the extra reliability

Another add on you could call it is the 8” twin down turn adjustable silencers for even lower DB track days, look forward to hearing how these perform when they need to

Adam also wanted a new 3” GT3 style inward rolled slip on tips so the DB killers can be swapped in and out nicely at events

Thanks for returning and trusting us to do the work, what a pleasure to work on.

If this is a service you think you require drop us a message 🏁🏁🏁