Mac’s Dirty Deeds Custom And Classic Motorcycles

05/09/2026

After an extensive engine rebuild Kawasaki Eliminator trike ready to go back to the customer

01/09/2026

V8 rover trike armrests removed to make way for new, old armrests were rotten and the one tube was full of water, fuel tank is off to be cleaned out although it doesn’t look that bad, fuel lines are scrap and by the look of the kinks there was probably some fuel starvation

01/09/2026

More updates on the V8 trike wireing looks bad , chocky block connectors and no fuses is usually a bad combination, burn your house down quicker than your exmissis, all this will need to be completely replaced

06/08/2026

Another old project, bike trailer built out of an old boat trailer i was given, it literally only cost me the price of the paint and a couple of new tyres

06/08/2026

Heads and valve gear all fitted to the Rover V8, locating pins have been changed for solid studs to prevent breakage and movement of the heads and the hydraulic lifters have been very recently replaced probably when the street cam was fitted

03/08/2026

650 pre unit triumph engine, re ground crank, 2 thou over big ends, new bores to replace the damaged ones, oversized pistons, uprated cams, new small ends, we’ll be building a few of these in between the main projects we’re doing over the next few months

20/07/2026

V8 heads rebuilt and valves reground and fitted ready to fit on block

26/06/2026

26/06/2026

Triumph 650 crank sludge trap

08/06/2026

Another one of our old projects, GSX600 modified with a multi direction adjustable alloy billit footrest bracket and fork stanchion mounted solenoid shifter buttons for an amputee, the side stand bracket was also removed re fabricated and mounted on the opposite side of the bike