Peter May Engineering

Peter May Engineering Peter May Engineering build and supply high quality road & race engines, gearboxes and components fo

The PME quarter elliptic rear springs are a perfect way to improve the handling of your quarter elliptic car whether be ...
14/05/2026

The PME quarter elliptic rear springs are a perfect way to improve the handling of your quarter elliptic car whether be it on the race track, up a Hillclimb course or on the road. Manufactured in the UK to our own specification these springs are designed to help with heavy cornering and to lower the car approximately 2" from original OE ride height, a great example of a car with these springs on being the breathtaking speedwell sprite!

Amazing to see such a large amount of midgets and sprites at Donington park for the opening meet of CSCC , with 2 of the...
28/03/2026

Amazing to see such a large amount of midgets and sprites at Donington park for the opening meet of CSCC , with 2 of the 3 podium spots being taken up by Peter May Engineering powered cars at the end of the first day !

A fresh batch of our hugely popular MG Midget and Austin Healey Sprite semi elliptic rear leaf springs have just arrived...
24/03/2026

A fresh batch of our hugely popular MG Midget and Austin Healey Sprite semi elliptic rear leaf springs have just arrived. Manufactured in the UK to our own specifications, these springs were originally developed for racing to help improve the handling under heavy cornering speeds.
Over the years we have seen more and more customers start to use these springs on their road cars as well, which has led us to now offer both a 1" lowered or 3" lowered version. While our 3" lowered version is designed more for track usage the 1" lowered version offers the same build quality, but only drops the car approximately 1" lower than the standard OE ride height be more suited to road conditions.

Looking to upgrade your rear hubs? Designed to better support the half shaft, the Peter May Engineering double bearing h...
23/02/2026

Looking to upgrade your rear hubs? Designed to better support the half shaft, the Peter May Engineering double bearing hub kit spreads the load to reduce the flexing that occurs with a standard hub under cornering.
Developed to be used on both fast road and competition A series axle cars including MG Midget and Austin Healey Sprite, Austin A35, A40 and Morris Minor) this kit can be used with either drum brakes or rear disc brake cars, It can also be used with steel wheel or wire wheel cars! The CNC machined hub kit comes complete with bearings, cir-clips and rear oil seal!

17/02/2026

Midland Classic Restorations is expanding — and we’re looking for [...]

They have arrived , after the long wait the first batch Peter May Engineering wheels have arrived !
09/01/2026

They have arrived , after the long wait the first batch Peter May Engineering wheels have arrived !

Are you looking to upgrade your 7.5" clutch cover and plate? Here at Peter May Engineering we stock covers and plates fo...
02/01/2026

Are you looking to upgrade your 7.5" clutch cover and plate? Here at Peter May Engineering we stock covers and plates for fast road and competition MG Midget and Austin Healey Sprites, designed to handle higher power engines without clutch slip these clutches are a perfect way to upgrade your Midget or Sprite.
Furthermore, when buying a competition cover or plate if you do not already have a roller release bearing one will need to be fitted, luckily Peter May Engineering stock a roller release bearing kit for a 7.5" clutch, if you already have one fitted this is also something we would always recommend you replace when your replacing your clutch.

It’s not just A Series we build here at Peter May Engineering with this Ford Cross Flow built and ready for the customer...
03/12/2025

It’s not just A Series we build here at Peter May Engineering with this Ford Cross Flow built and ready for the customer to fit !

We’re down to the last few pairs of our latest batch of Peter May Engineering competition steel wheel half shafts! 🔥Prec...
19/11/2025

We’re down to the last few pairs of our latest batch of Peter May Engineering competition steel wheel half shafts! 🔥

Precision-made from EN24 steel, they offer outstanding strength and reliability whether you’re out on track or pushing on the road. They’re also a direct fit for Austin A30 and A35 models. 💨

Grab yours before they’re gone 👇
https://www.petermayengineering.com/product/a40-competition-1-2-shafta-a-a-a-a-607mm/

Another full race straight cut Peter May Engineering Gearbox built and ready to shipped out to customer!
12/11/2025

Another full race straight cut Peter May Engineering Gearbox built and ready to shipped out to customer!

Address

Unit 4, Woodfield Business Units, Kidderminster Road
Droitwich
WR90JH

Opening Hours

Monday 9am - 6pm
Tuesday 9am - 6pm
Wednesday 9am - 6pm
Thursday 9am - 5:30pm
Friday 9am - 5:30pm

Telephone

+441905676111

Website

Alerts

Be the first to know and let us send you an email when Peter May Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Peter May Engineering:

Shortcuts

Share

Category