Central Tools Workshop

Call Directions Website

Central Tools Workshop No nonsense. No guesswork. Just solid welding and fabrication done properly. Message us and show us what you’re working with.

We fix the rust others turn away and keep campers, cars and vans safe with BS4872 standard welding.

🏁 Built for the stages, not just to look good. 🏁Fresh out of the workshop is David Duncan's No.52 2005 Subaru WRX STI.Th...
03/10/2026

🏁 Built for the stages, not just to look good. 🏁

Fresh out of the workshop is David Duncan's No.52 2005 Subaru WRX STI.

This isn't a garage queen. It's a proper rally car that has spent years doing exactly what it was built to do, taking impacts, hard landings, vibration and plenty of abuse on the stages.

By the time it arrived with us, there was damage across multiple panels, the rear spoiler had suffered extensive cracking, and the front passenger side had taken a significant hit.

The goal wasn't to hide the damage.

The goal was to repair it properly.

Every damaged panel was pulled, aligned, repaired and refinished. The front passenger side required extensive jigging, pulling, welding and metalwork to return everything back where it should be. A new front wing was fitted and painted, the rear quarter and doors were repaired, and the spoiler was reinforced to improve durability over the original design.

While the car was apart, the front crash bar was modified with weight saving and performance in mind, and the front bumper was reworked to improve airflow and allow for a permanently fitted towing eye.

No shortcuts. No quick fixes. No filler over problems.

Just proper fabrication, welding, panel repair and preparation carried out with the intention of getting the car ready for its next race.

The photos show the story better than words ever can.

From battered rally car... To a rally car ready for the next battle. 💪

📍 Coalville, Leicestershire

If you've got a Subaru, performance car, classic, track car or project that needs welding, fabrication, accident repair or bodywork carried out properly, feel free to get in touch.

Cracking day out at Scooby Fest, Thirsk Racecourse.There’s something special about taking a car you’ve dragged back from...
28/06/2026

Cracking day out at Scooby Fest, Thirsk Racecourse.

There’s something special about taking a car you’ve dragged back from the brink and parking it up alongside some of the cleanest builds around. All those hours in the workshop, all the metalwork, all the fettling… then you see people stop, smile, and appreciate the effort. Makes it all worthwhile.

Met some great people, saw some proper weapons, and came away buzzing with ideas for the next stage. Massive shout to the team behind the event you nailed it.
https://scoobyfest.co.uk

Already counting down to the next one.

This one came in after a nasty hit to the rear quarter, the kind of damage that makes your stomach drop when you first s...
24/06/2026

This one came in after a nasty hit to the rear quarter, the kind of damage that makes your stomach drop when you first see it.

The owner loves this car, and if you’re into classics, JDM, or campervans, you know that feeling. Some vehicles aren’t just transport. They’re memories, projects, pride and joy.

So instead of letting it go, he brought it to us for proper accident repair.

We pushed the structure back out, reshaped the metal, welded it strong again, skimmed it clean, and laid down fresh paint.
No shortcuts. No filler‑and‑hope. Just real craftsmanship.

And the result?
A car that looked finished… now looks loved again.

If your classic, your import, or your camper takes a hit, don’t panic.
Bring it to people who actually care about saving it.

Central Tools Workshop
Accident repair done properly.
Saving the vehicles people care about.

https://www.centraltoolsworkshop.co.uk/

At Central Tools Workshop a small change that makes a big difference! On this Ford RS2000, the accelerator pedal has bee...
23/05/2026

At Central Tools Workshop a small change that makes a big difference!

On this Ford RS2000, the accelerator pedal has been repositioned 30mm to the right, increasing clearance from the brake pedal and creating a more natural foot position for the driver.

Millimetre engineering is absolutely key in the modification process. Every measurement matters when it comes to driver comfort, control and confidence. The goal is always to keep the driver perfectly in tune with the car, ensuring precise pedal input and a more connected driving experience behind the wheel.

Sometimes it’s the smallest adjustments that deliver the biggest improvements.

Another bespoke aluminium repair/fabrication completed.This job took a little longer than anticipated, mainly due to the...
17/05/2026

Another bespoke aluminium repair/fabrication completed.

This job took a little longer than anticipated, mainly due to the amount of heat control and fine tuning required to achieve the correct balance between A/C, amperage, frequency, and overall weld stability. Sometimes these custom jobs demand a bit more patience to get the result right rather than just rushing the process.

The component has also been drilled as requested and is now ready for the next stage.

There is some very minor pitting visible around the weld edges. Unfortunately, this can occur depending on the cast quality and composition of the aluminium being fused together. That said, it does not compromise the structural integrity of the repair in any way.

Once coated, the calliper paint will settle nicely and provide a clean finished appearance.

Quality work takes time.

There’s something satisfying about keeping an older Alfa on the road properly.A customer brought me his Alfa Romeo Twin ...
17/05/2026

There’s something satisfying about keeping an older Alfa on the road properly.

A customer brought me his Alfa Romeo Twin Spark this week with a concern about the exhaust flexi section. The original pipe had deteriorated badly and was beginning to leak , enough that it would almost certainly become an MOT emissions failure.

Now, with many modern repairs, the easy option is to replace sections with whatever universal part fits quickest. But that wasn’t what the owner wanted. He wanted the repair done properly, while still keeping the car looking period-correct underneath, something I can fully appreciate with a classic Alfa.

The old flexi section was carefully removed, preserving as much of the original system as possible. A replacement flexi of the correct size and profile was then fabricated and welded into place, keeping the appearance close to factory while ensuring the exhaust remained gas-tight and MOT compliant.

It’s always rewarding when a repair not only solves the problem, but also respects the character of the car. Older Alfas deserve that extra bit of care.

Another Twin Spark saved from unnecessary replacement parts and ready for many more miles.

This camper came in for what was meant to be a simple bit of rust work… and as you can see from the photos, it turned in...
08/05/2026

This camper came in for what was meant to be a simple bit of rust work… and as you can see from the photos, it turned into a full‑on adventure.

Once we got underneath it, the sills were shot. Properly gone. So out came the rotten steel, needle‑gunned everything back, and welded in fresh metal. No point pretending it’s fine when it isn’t.

You’ll spot the underseal going on in the later pics, that’s after all the corrosion treatment. Should keep the underside healthy for a long while yet.

Then we found the bonus round: vermin. Nesting, chewed insulation, wiring gnawed clean through. Lovely. Cleaned the whole lot out and chased every electrical fault until the speedo cluster and engine light were behaving again.

Took 1.3 weeks all in, but it left here solid, safe, and running properly. Customer was over the moon, always nice when the graft shows.

If your vehicle’s hiding rust, dodgy wiring, or something that’s been nibbling where it shouldn’t, bring it in. We’ll sort it.

Based in Coalville Leicestershire
https://www.centraltoolsworkshop.co.uk/

Fabrication in Progress at Central Tools WorkshopThere’s something special about seeing a build stripped back to bare me...
02/05/2026

Fabrication in Progress at Central Tools Workshop

There’s something special about seeing a build stripped back to bare metal every weld, every bracket, every decision shaping what the car will become. This week in the workshop we’ve been deep into a full roll cage installation, turning a humble hatch into a properly reinforced track ready machine.

From precision cut tubing to fully welded mounting points, every part of this cage is custom fitted for strength, safety, and performance. No off the shelf shortcuts. No compromises. Just proper fabrication, done right.

If you’re planning a race build, restoring a classic, or need bespoke metalwork for your project, we’re here for the jobs that demand skill, accuracy, and a bit of Leicestershire grit.

🔧 Fabrication
🔧 Roll cages
🔧 Custom brackets & mounts
🔧 Restoration welding
🔧 Performance upgrades

Take a look at the progress shots and if you’ve got a project in mind, drop us a message or visit: www.centraltoolsworkshop.co.uk

Built to last. Built with pride.

26/04/2026

Project update, our Ford Es**rt Mk5 (34 years old)

It’s been a long time coming, but here’s a bit of an update on the Es**rt. As most of you know, this project has had its fair share of setbacks. A whole mix of faults and ongoing issues really slowed progress down, and if I’m honest, it got to the point where it had to take a back seat.

On top of that, life and other priorities got in the way, so the car hasn’t actually been started for around a year now.

That said, it’s still here and still a project I want to see through. It’s just going to need some time, patience, and a proper run-through to get it back on track again.

Appreciate everyone who’s asked about it hoping to get stuck back into it when I can.

Chris CTW

Address

Unit 3, The Oaks Industrial Estate
Coalville
LE673NQ

Opening Hours

Monday 8:30am - 6pm
Tuesday 8:30am - 6pm
Wednesday 8:30am - 6pm
Thursday 8:30am - 6pm
Friday 8:30am - 6pm
Saturday 8:30am - 2pm

Telephone

+441530432814

Website

,

Alerts

Be the first to know and let us send you an email when Central Tools Workshop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category