Garagereg

VISITS STRICTLY BY APPOINTMENT ONLY

Rotary Race Engines, parts and services

30/08/2026

Packing some corner seal pin orders 🫡

21/08/2026

You asked so……..
Finally, after putting these through the wringer and some real world testing in various conditions we are proud to release these for general sale

billet steel rear 13b and 12a counterweights.

For those that need to know…..
☑️ These are 200+ g heavier than stock and also come un drilled like the random aftermarket and Mazda rear counterweights, you builders who know about balancing will know why…. Mallory just went up to nearly £500 for a foot 👀
☑️ taper will not stretch like other aftermarket weights resulting in loss of endplay and reduced keyway sheer for the drag bois.
☑️ comes with 10.9 or optional arp hardware
☑️ tool steel “snug” keyways also available

PLEASE NOTE: you will need your assembly rebalanced to fit these, like you should fitting any counterweight to a manual assembly

The first 10 are already sold and have very limited number left, next batch will be bigger quantities.
Big love, Reg
🫡

09/08/2026

And here’s the exact reason we made these all those years ago. Not wire cut rx8 inserts like others are selling. made from scratch and heat treated right here in the uk, tired of losing your rubber inserts, dont want to run solids, use these

Edit, picture of corner seal travel found off the internet and seems it belongs to the biggest cry baby in the world with anger management issues so its been deleted

06/08/2026

Another large run of 1/2” studding on today (thanks for your patience). We interpolate to any tolerance of clearance you may require for different builders and different combinations on our centreless ground studs using our oversize 1pc dowells for a tight location all the way through.

Proven worldwide in 800hp street cars, 50psi on cast iron Mazda plates and 75+psi on billet motors. 🫡
🇬🇧

05/08/2026

🥵 😮‍💨

Big news coming soon but for now, enjoy our rx8 corner seal to rx7 depth apex seal inserts in their new packaging. 100’s of sets in stock and with our vendors around the world 🫡

Price remains the same

30/07/2026

462 at the wheels for Ricky’s pump fuel run in tune at 14psi
Garagereg semi pp motor
S**t ton of issues with new bolt on part failures took the boys time away from tuning to rectify and ended the session early

Thanks for the tune and the and Phil for the wiring

intakes and oil pan

Can’t wait to get the e85 in and wind her up and get it to the track. 🏌️‍♂️

29/07/2026

For all you high rpm lovers. Keep your wet sump pressure stable up where it matters.

Mfr, new fd and henshaw regs, shim kits and Oringed oil pump housings 😮‍💨 in stock

24/07/2026

Mazda rare parts boyos worldwide

I’m looking for a racing beat front aluminium side plate p/no: RB 11051

Any leads?

21/07/2026

Oringed fd3s oil pump housings in stock, available as exchange for a new housing or for purchase of a complete new oil pump p/no NF01-14-100

Or send in your housing for us to ruin for you

Will come with correct size oring

Address

Unit 10, Wildmoor Mill, Mill Lane
Bromsgrove
B610BX

Website

http://www.garagereg.co.uk/

Alerts

Be the first to know and let us send you an email when Garagereg posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Garagereg:

Want your business to be the top-listed Cars & Car Service in Bromsgrove?