JTI Motorsport

JTI Motorsport JZ engine specialist
Engine building, fabrication, servicing, mechanical restoration

16/06/2026

Max Williams Enjoying his 8HP gearbox swap 😅

05/06/2026

Up next on our spree of dyno sessions 😈

Solid day today doing power runs with the 1JZ 8HP E36 build, 32degrees in the dyno cell but still made a solid 553bhp to...
27/05/2026

Solid day today doing power runs with the 1JZ 8HP E36 build, 32degrees in the dyno cell but still made a solid 553bhp to the wheels 👌

2JZ S13 that we built a few years ago. Originally with a R154, now fitted with a BMW 8HP70 setup. Stock bottom end, 272...
21/05/2026

2JZ S13 that we built a few years ago. Originally with a R154, now fitted with a BMW 8HP70 setup. Stock bottom end, 272 cams. 573bhp and 507lbft to the wheels. 325bhp and 475lbft at 3500rpm 👌

Insitu valve stem seal replacement. Abit of a surgical job to be certain all of the old valve stem seals pieces are out,...
07/05/2026

Insitu valve stem seal replacement. Abit of a surgical job to be certain all of the old valve stem seals pieces are out, especially when the rear cylinder is buried under the fire wall of 1JZ Chevy pickup truck

Three 2JZ engine builds back from machining and ready to build. Busy few weeks ahead in the engine room!
21/04/2026

Three 2JZ engine builds back from machining and ready to build. Busy few weeks ahead in the engine room!

We've made a start on this year's first full build. This Aristo is having the engine swapped over into a much cleaner ch...
24/02/2026

We've made a start on this year's first full build. This Aristo is having the engine swapped over into a much cleaner chassis and having the engine fully built, G35 900 turbo and 8HP gearbox conversion. Engine is going for machining this week, stay tuned!

4" round downpipe to 4" oval, back to 4" round and to a silencer with custom 4.5" tip. Including the downpipe, 49 pie c...
03/02/2026

4" round downpipe to 4" oval, back to 4" round and to a silencer with custom 4.5" tip. Including the downpipe, 49 pie cuts/welds all backpurged 😅

In situ valve stem seal replacement. Also fitting BC valve springs and cams for this JZX100
29/01/2026

In situ valve stem seal replacement. Also fitting BC valve springs and cams for this JZX100

Solid progress this month in our new workshop getting the new engine room up, still some tidying and progress to be made...
22/12/2025

Solid progress this month in our new workshop getting the new engine room up, still some tidying and progress to be made but we'll see you all in the new year with some very exciting builds and projects ✌️

Address

Unit A, Hartleywood Farm
Bordon
GU359JR

Website

Alerts

Be the first to know and let us send you an email when JTI Motorsport posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category