MotoFabrication

MotoFabrication Motorcycle restoration and rebuilds in North Devon. European bikes a speciality.

Full resto of this 916SP3 coming to an end
18/05/2025

Full resto of this 916SP3 coming to an end

Rare opportunity to work on motorcycling royalty! '74 MV sport for valve clearances and leaky gear selector seals.  Most...
07/01/2025

Rare opportunity to work on motorcycling royalty! '74 MV sport for valve clearances and leaky gear selector seals. Most clearances required attention and the motor raised in the frame to get to the gear selector. Can't generally get MV parts from Halfords so gaskets and tools made from scratch

1974 Ducati GT750 completed. There's few bikes of this vintage that ride as well as this!
11/09/2024

1974 Ducati GT750 completed. There's few bikes of this vintage that ride as well as this!

Coming to the end of a particularly challenging engine build. Compounded by the rarity of some '70's Ducati spares
21/08/2024

Coming to the end of a particularly challenging engine build. Compounded by the rarity of some '70's Ducati spares

Another poorly bevel Ducati, In for new pistons, rebore  & full top end refresh. All new bearings and re-shim.
14/07/2024

Another poorly bevel Ducati, In for new pistons, rebore & full top end refresh. All new bearings and re-shim.

50 year old motorcycles always have a few hidden joys to rectify. Seals only seal for so long before they harden and fai...
27/01/2024

50 year old motorcycles always have a few hidden joys to rectify. Seals only seal for so long before they harden and fail. Old Ducati's recces their kickstart seals well within the case so key hole surgery is needed to get the bu**er out

This 1974 Ducati GT was brought to me following a previous repair to fix a broken alternator cover. Unfortunately the jo...
27/01/2024

This 1974 Ducati GT was brought to me following a previous repair to fix a broken alternator cover. Unfortunately the job put the kickstart shaft bush wildly out of line. By making an undersized bush there was enough material to bore a non concentric hole. Just now need to tidy up that rough weld!

Couple of steps closer to completing a long term build of an MV750 sport.
03/12/2023

Couple of steps closer to completing a long term build of an MV750 sport.

Much quieter with new pistons, barrels, cam followers and sprung cam chain.
18/11/2023

Much quieter with new pistons, barrels, cam followers and sprung cam chain.

Guzzi engine back together, Just wheelbarrow the rest around the motor!
06/11/2023

Guzzi engine back together, Just wheelbarrow the rest around the motor!

Blast from the past with a Guzzi LM1 motor for new pistons, cam followers, sprung cam chain tensioner and new seals
30/10/2023

Blast from the past with a Guzzi LM1 motor for new pistons, cam followers, sprung cam chain tensioner and new seals

Address

Bideford

Alerts

Be the first to know and let us send you an email when MotoFabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MotoFabrication:

Share