Pumabuild

Pumabuild Welcome to Pumabuild's fan page on Facebook. This page is for all customers and staff new and old. Were a main Ford performance specialist.

If your wondering who Pumabuild are and what the business is about here is a brief view

Pumabuild is a family run business based in the West Midlands. Who have built some high performance Ford's since 1998 when we open our doors. We deal in sporty coupe such as Puma's, FRP, Focus RS's, Focus ST's and Fiesta ST's. We also have done many project cars which have been featured in many Ford magazines.

It’s a good job I have this Bridgeport miller to get the snapped bolts out I would be seriously lost without it. I have ...
23/06/2026

It’s a good job I have this Bridgeport miller to get the snapped bolts out I would be seriously lost without it.
I have owned this miller for 26 years now 😎

Pumabuild 01213562638

23/06/2026

Had a Focus RS MK3 in today for a Front Wheel Bearing.
The car was very clean but the knuckles were a little rusty for a 10 year old car. Managed to snap the bolt that pinches the strut.
So I gave it a blast In The media blaster to remove the rust and start to remove the broken bolt

Pumabuild 01213562638

Another BMW for a disc skim Pumabuild 01213562638
23/06/2026

Another BMW for a disc skim

Pumabuild 01213562638

Volvo XC60 for a Hunter 4 Wheel Alignment. If your car is pulling or your steering wheel is not straight then book in fo...
20/06/2026

Volvo XC60 for a Hunter 4 Wheel Alignment.
If your car is pulling or your steering wheel is not straight then book in for a Hunter 4 Wheel Alignment. The Hunter system is by far the best in the market insuring your geometry is set correctly.

Sunken alignment ramp means we can take very low vehicles. We can also do long wheelbase vehicles

Pumabuild 01213562638

So this Focus has been around the houses and from what I can work out someone has dropped the ECU on to the starter moto...
20/06/2026

So this Focus has been around the houses and from what I can work out someone has dropped the ECU on to the starter motor and fried the ECU.
They then changed loads of parts and coded keys 🤯
They made a right mess of it.
So with a little Frankenstein wiring I managed to pull off the eeprom data and the external flash
Hopefully I can save this ST225
The metal ECU holders are a stupid idea and you are much better off with the plastic Airtec ones

Pumabuild 01213562638

Focus RS MK3 for a few stone chips and a front end repaint 😎Pumabuild 01213562638
20/06/2026

Focus RS MK3 for a few stone chips and a front end repaint 😎

Pumabuild 01213562638

Focus ST being cleaned ready for customer to collect on Monday. 😎This Focus had a new Rear Bumper. Pumabuild 01213562638
20/06/2026

Focus ST being cleaned ready for customer to collect on Monday. 😎
This Focus had a new Rear Bumper.

Pumabuild 01213562638

We had a BMW 316 in for a new rear bumper skin. Pumabuild 01213562638
20/06/2026

We had a BMW 316 in for a new rear bumper skin.

Pumabuild 01213562638

Focus ST was involved In a non fault accident in Wales. We recovered it and carried out an insurance repair to get him b...
19/06/2026

Focus ST was involved In a non fault accident in Wales.
We recovered it and carried out an insurance repair to get him back on the road

Pumabuild 01213562638

In the spray booth again and a quick coat of Frozen White on a rear bumper We also take on insurance work and non fault ...
19/06/2026

In the spray booth again and a quick coat of Frozen White on a rear bumper
We also take on insurance work and non fault accident claims

Pumabuild 01213562638

Address

Aldridge
WS98BG

Opening Hours

Monday 8:30am - 6pm
Tuesday 8:30am - 6pm
Wednesday 8:30am - 6pm
Thursday 8:30am - 6pm
Friday 8:30am - 6pm

Website

Alerts

Be the first to know and let us send you an email when Pumabuild posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category