Budweg Caliper A/S - English

Budweg Caliper A/S - English Budweg is a leading supplier of remanufactured brake calipers for the European automotive aftermarket We do everything better than what is strictly necessary.

We never cut corners in regards to safety or quality. Both in terms of the overall safety of the car you’re working on as well as our ability to deliver and assist you with everything from good advice to guidance and monitoring. BUDWEG has the lowest complaint rate in the Independent Aftermarket – in regards to faulty deliveries as well as product defects. This means you’ll not be at risk for comp

laints or loss of credibility. After all, brake calipers are all about safety. And we do not compromise on safety. Better be safe!

Step 9: End of Line Testing100% Testing. Every Caliper. No Exceptions.Every remanufactured BUDWEG caliper undergoes a fu...
27/04/2026

Step 9: End of Line Testing

100% Testing. Every Caliper. No Exceptions.

Every remanufactured BUDWEG caliper undergoes a full end of line test performed by trained technicians:

Functional & dimensional testing

• Compressed air test at 23 ±2 bar
• Test block tolerance verification (±0.3 mm)
• Piston rollback validation
• Handbrake lever movement checks (3–5 mm)

Visual & identification checks

• Casting code
• Left/right configuration
• Correct assembly
• Lubrication and sealing surfaces

Product validation

This is the final step before the caliper is prepared for delivery - ensuring BUDWEG quality in every brake caliper.

Step 8: Incoming Quality CheckBefore proceeding to the final test stage:• Incoming inspection according to ISO standards...
20/04/2026

Step 8: Incoming Quality Check

Before proceeding to the final test stage:

• Incoming inspection according to ISO standards.
• Critical dimensions are verified
• Results are registered in internal systems for long-term traceability

This ensures only approved components make it to final assembly and testing.

Step 7: AssemblyPrecise Work by Skilled TechniciansAssembly follows detailed work instructions, bill of materials, and d...
17/04/2026

Step 7: Assembly

Precise Work by Skilled Technicians

Assembly follows detailed work instructions, bill of materials, and documented torque and lubrication specifications:

• Greasing of axles, pistons, guide bushings, and rubber components
• Dimensional checks of every batch of spare parts

This ensures every caliper is built with consistency and precision.

Step 6: TraceabilityTraceability is built into every BUDWEG caliper:• Laser, needle, or label-based marking, providing a...
13/04/2026

Step 6: Traceability

Traceability is built into every BUDWEG caliper:

• Laser, needle, or label-based marking, providing all essential identification details
• Every batch of spare parts is inspected and marked with item number, bar code, date code, supplier initials, and quantity

This guarantees complete tracking from production to installation.

Step 5: RemanufacturingRestoring OE PerformanceIn this stage, critical mechanical areas are remanufactured:• All threads...
10/04/2026

Step 5: Remanufacturing

Restoring OE Performance

In this stage, critical mechanical areas are remanufactured:
• All threads are recut
• Brass bushings are replaced
• Worn bushing areas are machined and fitted with new Teflon bushings
• Aluminum housings may need grinding of the piston bores and claws to restore OE dimensions

Each caliper receives the mechanical attention required to meet BUDWEG’s specifications for quality, functionality and durability.

Step 4: ElectroplatingEvery BUDWEG caliper housing goes through a documented electroplating process:• Base layer: acid z...
07/04/2026

Step 4: Electroplating

Every BUDWEG caliper housing goes through a documented electroplating process:

• Base layer: acid zinc
• Passivation: Cr3 (trivalent chrome)
• Minimum coating thickness: 8 µm
• Fully automated closed-loop plating line
• Regular salt spray testing performed on sample units

This ensures consistent surface protection and a high-quality finish.

🔍 Improving Traceability in Remanufactured Brake CalipersAs part of our continued focus on quality, transparency, and fu...
01/04/2026

🔍 Improving Traceability in Remanufactured Brake Calipers

As part of our continued focus on quality, transparency, and full product traceability, we are initiating a test phase for an improved marking solution on our brake calipers.

Purpose of the Change
✅ Enhance readability and durability of product information
✅ Support more efficient tracking throughout the value chain
✅ Ensure consistent product identification independent of surface structure

The test applies to brake calipers remanufactured in Denmark and does not affect specifications, performance, or logistics.

We value dialogue and feedback – feel free to reach out if you have any questions or would like additional details.

Would you like to stay updated?
Click here https://www.terrepower.com/europe-newsletter

Happy Easter from all of us at BUDWEG.🌷Thank you for driving quality and sustainability forward together with us. ...
31/03/2026

Happy Easter from all of us at BUDWEG.🌷

Thank you for driving quality and sustainability forward together with us.

Step 3: CleaningCleaning the brake caliper is a critical step. Each dismantled core is cleaned using either dry or wet s...
30/03/2026

Step 3: Cleaning

Cleaning the brake caliper is a critical step. Each dismantled core is cleaned using either dry or wet shot blasting methods.

After cleaning, every housing is visually inspected again, ensuring it is free from contamination before moving to the next stage.

Step 2: DismantlingPreparing the Caliper for RemanufacturingOnce accepted, each caliper is completely dismantled:• Pisto...
27/03/2026

Step 2: Dismantling

Preparing the Caliper for Remanufacturing

Once accepted, each caliper is completely dismantled:
• Pistons are pressed out using a 300 bar water/oil solution
• All rubber components, bushings, bleeder screws, and guide elements are removed and discarded

Adresse

Industrivej 10
Odense
5260

Telefon

+4563143308

Internet side

Underretninger

Vær den første til at vide, og lad os sende dig en email, når Budweg Caliper A/S - English sender nyheder og tilbud. Din e-mail-adresse vil ikke blive brugt til andre formål, og du kan til enhver tid afmelde dig.

Kontakt Virksomheden

Send en besked til Budweg Caliper A/S - English:

Genveje

Del

Type