TAU tech Global. LED Angel Eyes & Custom DRL

18/09/2026

Bright orange beams from our TAU Tech halo rings are lighting up your feed today!

Featured here is a client's Toyota Harrier equipped with our BMW G-Style halos.

This kit is our orange dual-mode version, functioning as both DRLs and parking lights in a single housing. If you want to get creative with relays and capacitors, you can even wire them up as turn signals.

The Harrier headlights are sealed with butyl rubber glue (easy to disassemble), making this a smooth DIY project you can handle in your garage over the weekend.

Got questions? We're always here to help via Facebook Messenger or WhatsApp at +381611802826. Don't forget to follow our page for more custom builds!

17/09/2026

How about a photo set from our client and his Toyota Carina ED?

These aren't your ordinary headlights—they feature clear glass lenses and aftermarket projector retrofits, so this setup with our halo rings isn't meant for a stock build. Originally, our partners came up with this exact halo arrangement, and this project is a complete recreation of that setup, built entirely by our client.

To pull this off, you'll need clear headlight lenses, the exact same projectors shown in the photos, and some trimming of the headlight reflectors. On the upside, the lenses are sealed with butyl rubber glue, making them easy to disassemble.

By the way, this kit is our RGB-BT version. It features bright, full-color DRLs that you can control via the included IR remote or directly from a phone app. The halos themselves are mounted using the epoxy glue included in the kit.

As always, we’re ready to assist you via Facebook Messenger or WhatsApp at +381611802826. Don't forget to follow our page for more custom builds!

16/09/2026

Bright yellow or orange?

Why choose when you can combine both?

Check out our client’s bright yellow Honda Accord 6 featuring our orange dual-mode TAU Tech halo ring kit.

The two colors pair together absolutely brilliantly. What do you think?

By the way, Accord 6 headlights are non-permaseal (easy to disassemble), and the shrouds don't require any cutting during installation. This means you can easily do the install yourself over the weekend in your garage.

The halo shape shown here is Option 4. You can check out our other available shapes under our hashtag .

As always, we’re ready to help with any questions via Facebook Messenger or WhatsApp at +381611802826. Don't forget to follow our page for more custom builds!

25/08/2026

25/08/2026

We’ve got photos for two different halo ring styles for the Toyota Wish 20 today—and they look fantastic.

We’re highlighting both Option 1 (full continuous rings) and Option 2 (top-open rings).

Both feature our RGB-BT setup, giving you full color-changing control via an IR remote or a smartphone app. Don't worry—they also feature street-legal solid white and amber modes for daily driving.

The Wish headlights use soft, pliable sealant, making this a great DIY weekend project with minimal tools required. Even better, no shroud trimming is needed, which simplifies the install.

Pro tip: just be sure to remove the small inner lens over the turn signal, as it gets in the way during installation.

As always, we are ready to assist you via Facebook Messenger or WhatsApp at +381611802826. Don't forget to follow our community page: https://www.facebook.com/share/1BsCXwXke3/

24/08/2026

I couldn't resist sharing these stunning photos sent over by one of our customers!

It’s not every day we get photos this good—and we even got a bonus video.

A showcase like this definitely deserves your full attention.

Featured here is our client’s Toyota Altezza retrofitted with our TAU tech halo rings.

This build uses our RGB-BT kit—a multi-color setup controlled directly via an IR remote or a smartphone app.

For street-legal driving, you can easily switch them to solid white or amber modes.

The facelift headlights use soft, pliable sealant, and the halos require no trimming of the internal bezels. That makes this a seamless DIY project you can comfortably tackle over a weekend in your garage.

As always, we are ready to assist you via Facebook Messenger or WhatsApp at +381611802826. Don't forget to follow our community page: https://www.facebook.com/share/1BsCXwXke3/

21/08/2026

You know we offer modern halo styles for the BMW X6 E71, right? Not just standard round replacements.

Today, I’m showing off the F-Style on a customer’s car.

Pure, clean F-Style with zero fluff.

A crisp, sleek look powered by our ultra-bright single-mode white kit that retains factory dimming behavior when the main headlights turn on.

That’s a native feature on pre-facelift E71s and select pre-facelift E70s, meaning a single-mode kit is all you need—your car’s body control module handles the rest automatically.

The catch? These headlights use hard, non-pliable butyl sealant.

The quick workaround: cut the old lenses off and snap fresh ones into place.

No pressure, but we happen to stock new lenses, high-grade sealant, and projector retrofits as well.

As always, we are ready to assist you via Facebook Messenger or WhatsApp at +381611802826. Don't forget to follow our page for more updates https://www.facebook.com/share/1BsCXwXke3/

20/08/2026

Fitting Lexus style into a Toyota?

Sounds easy enough on paper—until you remember it’s like trying to cross closely related breeds (after all, Lexus is Toyota, just tailored for a premium audience).

In our experience, Lexus-style checkmarks stubbornly refuse to fit into Toyotas, or even into earlier Lexus models. Almost every installation used to be a tale of sheer pain and suffering—though the final result was always worth it.

However, by integrating 3D modeling into our development process, we’ve found a way to overcome these hurdles. By accurately predicting the position of the DRLs inside the headlight housing, we can now avoid cutting the bezels altogether, even if it leaves minimal clearances.

We are actively working on bringing curved halo designs into full production, but we’re taking the time to ensure the final product is fully perfected before release.

In the meantime, we have this setup: Lexus-style checkmarks designed specifically for pre-facelift Toyota Caldina 241 headlights—no mask trimming required.

Since these headlights use soft, pliable sealant, they are relatively easy to open, making this a great DIY weekend project for your garage.

Featured here is a customer's Caldina retrofitted with our ultra-bright dual-mode white kit. Safe to say, the results speak for themselves.

As always, we are ready to assist you via Facebook Messenger or WhatsApp at +381611802826. Don't forget to follow our page for more updates!

19/08/2026

While everyone’s off doing their own thing, I’m back with another showdown: Ultra-Bright White vs. RGB-BT kits!

And today, our showcase features two client Nissan X-Trail T31 facelift models.

The first one is running our ultra-bright dual-mode white kit, which functions as daily DRLs or parking lights.

The second one features the RGB-BT kit, offering standard parking light brightness along with dynamic color-changing controlled via an IR remote or a smartphone app.

In both cases, these headlights use soft, pliable sealant and require no trimming of the internal bezels/shrouds. That means it's a smooth DIY project you can comfortably tackle over a weekend in your garage.

So, which team are you on? Crisp White DRLs or Multi-Color Accent Lights?

As always, we are ready to assist you via Facebook Messenger or WhatsApp at +381611802826. Don't forget to follow our page for more updates!

15/08/2026

Summer is in full swing, and there are plenty of reasons to get out into nature!

And the best ride for a getaway like that is, of course, a crossover or an SUV.
If it’s equipped with halo rings, though? Absolute perfection.
As you probably guessed, that was our intro for another showcase post featuring TAU tech halo rings installed on a client’s vehicle!

And today’s feature is the Mitsubishi Pajero IV.

This kit is our ultra-bright dual-mode white setup—functioning as DRLLs (daytime running lights) that dim down to 30% brightness when the main headlights are turned on.

The headlights use a soft, pliable butyl sealant, and no trimming of the internal bezels/shrouds is required. That means it's a smooth DIY project you can easily tackle over a weekend in your garage!

As always, we are ready to assist you via Facebook Messenger or WhatsApp at +381611802826. Don't forget to follow our page for more updates!