Qingdao Dookyu Crown Marine Co., Ltd

Call Directions Website Contact the business

Qingdao Dookyu Crown Marine Co., Ltd Qingdao Dookyu Crown Marine Co., Ltd is located in Qingdao, Shandong Province. It is a new type of yacht company providing personal customized services.

Full Load Displacement on an 11m Aluminum Patrol BoatFull load displacement is the weight of a vessel at its design load...
2026/10/24

Full Load Displacement on an 11m Aluminum Patrol Boat

Full load displacement is the weight of a vessel at its design loaded condition, including hull, machinery, fuel, water, crew and gear. On the Dookyu Crown 11m Aluminum Alloy Cruiser Boat (DK-WR), the published full load displacement is 5.60t and the full load draught is 0.47m. Read the two numbers as one load case: 5.60t frames the load budget and trim condition, while 0.47m shows the water depth the design expects at that weight. For patrol or workboat duty with shallow approaches, the draught is the figure to check—but keep a margin. Actual clearance changes with loading, trim, speed and sea state. When comparing 11m aluminum patrol boats, ask for displacement and draught at the same load condition.

Pump Output Before Paint: Specifying the DK-FR Fire BoatA hull that floats is not a fire boat.Offshore fire and rescue t...
2026/10/21

Pump Output Before Paint: Specifying the DK-FR Fire Boat

A hull that floats is not a fire boat.

Offshore fire and rescue teams bring a blunt test to procurement: can this aluminum boat put water where it matters, and can it reach the scene on time? Pump output and propulsion reliability decide that, not hull finish.

The DK-FR 13m aluminum rescue fire boat is specified around that gap. Its fire pump flow rate is 1500 GPM, supported by twin 200HP Mercury outboard motors, inside a 13.25 m aluminum alloy hull with a 3.6 m beam and 500 L fuel tank — built for offshore firefighting and rescue missions.

Mission fit still varies. Functional layout and equipment configuration follow the operating profile, so the specification should start with the duty, not the catalogue.

Dookyu Crown's customization and export support FAQ covers what buyers ask first: mission fit, purchasing terms and acceptance criteria. Worth reading before you write the spec.

2026/10/20

Built for the working day, not the marina. This red utility workboat from D.STAR runs an open cargo deck, a green canopy over the helm, twin outboards aft and a fire monitor point on deck — a straightforward platform for personnel and cargo along the coast. Specifying a workboat for inshore duty? Tell us your route and we will tell you what fits. Send us a message.

Sailboat Stability: How Twin-Hull Layout Enhances Safety for FamiliesFamily sailing rarely fails on speed. It fails on c...
2026/10/18

Sailboat Stability: How Twin-Hull Layout Enhances Safety for Families

Family sailing rarely fails on speed. It fails on comfort — and on the water, comfort starts with stability.

The Dookyu Crown DK-CA is a 38-foot catamaran aluminum sailboat built around a twin-hull layout. Because buoyancy is spread across two hulls rather than one, the boat heels far less and keeps a steadier motion in a swell. For families, that is the practical difference: children can move around the deck, and someone working in the galley below is not bracing against every wave.

The hull is marine-grade aluminum, naturally corrosion-resistant and easier to maintain over a long ownership cycle than a hull that needs regular refinishing. Cabins, galley, navigation station, and sail plan can all be customized to how the boat will actually be used — weekend getaways, coastal cruising, or charter work.

For a family boat, the question is not how fast it sails. It is how it behaves when the water is not flat.

Aluminum Boat Comparison: DK-FS 6.25m vs DK-WR 11m — Three Key DifferencesSame alloy discipline, two very different hull...
2026/10/15

Aluminum Boat Comparison: DK-FS 6.25m vs DK-WR 11m — Three Key Differences

Same alloy discipline, two very different hulls — the DK-FS and the DK-WR are sized for different work.

Size. The DK-FS measures 6.25m overall, 2.25m beam, with a designed draft of 0.35m. The DK-WR runs 11.00m long and 3.25m wide, with a 0.47m full-load draught and 5.60t full-load displacement. That beam and displacement gap decides how much deck, structure and load each hull can carry.

Propulsion and speed. The DK-FS runs a single 150HP YAMAHA outboard and reaches a maximum speed of 30 knots. The DK-WR uses twin 150HP outboards, 300HP total, with a design speed of 26 knots. More installed power, lower design speed, the trade for a heavier hull.

Intended mission. The DK-FS covers coastal, lake and river fishing with a 6-person complement. The DK-WR, built in 5083-H116 aluminum, is configured for coastal rescue, offshore patrol, passenger transport and professional workboat operations.

Fire Boat in Action: Offshore Firefighting and Rescue MissionsOffshore firefighting rarely happens in calm water. By the...
2026/10/12

Fire Boat in Action: Offshore Firefighting and Rescue Missions

Offshore firefighting rarely happens in calm water. By the time a rescue fire boat reaches the scene, distance and sea state are already working against the crew.

The Dookyu Crown DK-FR is a 13m aluminum rescue fire boat specified around two numbers: twin 200HP Mercury motors for the run out, and a 1500 gpm fire pump for the fight itself. Hull length is 13.25m, beam 3.6m, fuel capacity 500L.

Why aluminum for this duty rather than steel or fiberglass? Compared with steel hulls, marine-grade aluminum differs mainly in weight, fuel efficiency and corrosion resistance. The material costs more upfront, but full-life-cycle maintenance is lower — and unlike fiberglass, an aluminum hull is easier to repair in the field.

For commercial rescue and high-impact maritime environments, that trade-off is often the deciding factor.

Is a 13m Aluminum Rescue Fire Boat Enough for Offshore Duty?Short answer: for offshore firefighting and rescue duty, 13 ...
2026/10/09

Is a 13m Aluminum Rescue Fire Boat Enough for Offshore Duty?

Short answer: for offshore firefighting and rescue duty, 13 metres can be enough — when the boat's real numbers match the job.

The DK-FR, part of the Dookyu Crown 13m Rescue Fire Boat Series, measures 13.25m long by 3.6m wide, with an aluminum alloy hull, twin 200HP Mercury motors and a 1500 GPM fire pump flow rate. Those are the figures worth checking against your own response profile: pump flow for fire suppression, twin outboards for a fast run out and back, and an aluminum hull for corrosion resistance at lower weight.

Length alone never decides offshore duty. Response distance, required flow and crew size do.

One 13.25m aluminum fire rescue boat has been used by an international customer for offshore firefighting and rescue missions, and the case is located in Ecuador.

Dookyu Crown's FAQ answers the questions buyers ask next: vessel customization, export support, purchasing terms and acceptance criteria.

Model Spotlight: DK-PS 19m Catamaran for Island RoutesSome island routes don't need a bigger boat. They need a different...
2026/10/06

Model Spotlight: DK-PS 19m Catamaran for Island Routes

Some island routes don't need a bigger boat. They need a different kind of boat.

If you move passengers between islands — town pier to resort cay, mainland to a harbour with no bridge — you know the drill. Two small boats, two crews, two fuel bills, and a boarding scramble every time the scheduled run comes in.

That's the gap the DK-PS was designed around. It's a 19m passenger catamaran, and we build it at Qingdao Dookyu Crown Marine Co., Ltd., a yard in Qingdao, Shandong, that turns out aluminum boats, steel vessels and fiberglass hulls for commercial and government operators.

The number that matters most: 50 passengers. Not 50 squeezed in standing — 50 with a deck you can actually load and unload. Under the deck, propulsion is twin diesel engines with fixed-pitch propellers, and the running gear is doubled up: double engines, double paddles, double rudders. In plain terms, trouble on one side doesn't leave you drifting with a full deck of people on board.

Why twin hulls? On a short crossing, boarding time usually costs you more than top speed does. A catamaran gives you a wider platform, steadier footing at the pier, and more usable deck for seating, luggage and a proper boarding gate. Passengers with bags, kids or a bad knee feel that difference in the first thirty seconds.

One honest limit. This is a calm-water design: sheltered channels, bays, lagoon runs, harbour-to-harbour hops. If your route regularly punches through open swell, the DK-PS isn't the right hull, and we'd rather say so now than after the contract is signed.

On the paperwork side, the 19m Passenger Catamaran series is covered by an ECM-issued attestation, certificate no. 0P250716.QDCTN80, valid to 15 July 2030.

Because it's a semi-custom build, seating configuration, deck layout, wheelhouse position, paint and interior style can all be worked out with our team. Minimum order is one vessel, typical lead time runs 30–60 days, and OEM or ODM production is available if you already have drawings or a brand to fit.

So here's a question for the operators out there: on your route, what actually eats the schedule — the boarding, the headcount, or the weather window? That answer usually decides the layout long before we cut the first plate of steel.

What 26 Knots Buys You on an 11m Aluminum Work BoatA 26-knot work boat isn't really about speed. It's about how fast "we...
2026/10/03

What 26 Knots Buys You on an 11m Aluminum Work Boat

A 26-knot work boat isn't really about speed. It's about how fast "we're on our way" turns into "we're on scene."

Ask anyone running coastal patrols or rescue cover and you get the same answer: the hull that gets picked for the call isn't the prettiest one at the dock. It's the one that holds plane in a chop, turns tight near a jetty, and still has fuel in the tank at the end of the shift.

That's the brief behind the DK-WR, our 11m aluminum work boat. We build it at Dookyu Crown, an aluminum boat builder in Qingdao, China, working across workboats, rescue craft, fishing boats and yachts.

Power and range come first, because those two decide the mission window. Twin 150HP outboards give 300HP combined against a 26-knot design speed, and the fuel tank carries 400L. On a patrol line or a medevac leg, that combo means fewer fuel stops and a boat that keeps its pace when the water turns messy.

Hull numbers matter just as much: 11.00m overall length, 8.81m waterline length, 3.25m beam, 0.885m depth, 0.47m full-load draught and 5.60t full-load displacement — hull and superstructure both in 5083-H116 aluminum alloy.

That 0.47m draught is the quiet one. Shallow river mouths, small ramps, thin water over a sandbar — a hull drawing more either waits for tide or simply doesn't go.

Standard kit on the DK-WR includes GPS, magnetic compass, VHF and AIS, plus dual fuel quick-close valves, an automatic bilge pump, a CO₂ + dry powder extinguisher, 6 life jackets and 2 life buoys. Working surfaces are covered in non-slip EVA imitation teak, the cabin has a soft seat sofa, and the helm carries a remote control searchlight, tachometer and oil level gauge. DC distribution board, battery charger and shore power socket handle the power side.

Paperwork check, since that's where a lot of quotes quietly fall apart: the DK-WR sits under the Voluntary Attestation for Recreational Craft, certificate 0P250716.QDCTN80 issued by ECM, against EN ISO 12217-1:2017, EN ISO 12217-3:2017 and Regulation (EU) 2013/53/EU. Whichever builder you talk to, get the certificate scope and number in writing before you sign.

If your week mixes patrol hours, rescue standby and moving crew or gear, the DK-WR is worth a look. Happy to send the full spec sheet and layout options.

What do you check first on a work boat — the sea trial, or the certificate file? 🚤

Why 5083-H116 Aluminum Skips the Yearly Repaint CycleA Saturday at the dock with a scraper in your hand. That's the part...
2026/09/30

Why 5083-H116 Aluminum Skips the Yearly Repaint Cycle

A Saturday at the dock with a scraper in your hand. That's the part of boat ownership that never makes it into the brochure.

Steel hulls rust. Fiberglass blisters and then needs gelcoat work. Wood rots from the inside out. And none of it is a one-time fix — it's a bill that comes back every season, plus the weeks your boat sits out of the water while you deal with it.

This is where 5083-H116 comes in. It's a marine-grade aluminum alloy, and unlike steel, it doesn't rust in saltwater. Aluminum forms its own thin protective oxide layer, so the hull isn't depending on a coating that has to be renewed just to survive. That's a big part of why boatbuilders working in saltwater keep coming back to it.

The DK-WR is an 11-meter aluminum alloy cruiser from Qingdao Dookyu Crown Marine Co., Ltd., a Qingdao-based builder specializing in the design, R&D, production and after-sales service of aluminum alloy vessels. Both the main hull and the superstructure are built from the same 5083-H116 alloy, so you're not leaning on a mixed-material joint that can turn into a problem later.

The numbers, briefly: 11.00m overall length, 8.81m waterline, 3.25m beam, 0.885m depth moulded, 5.60t full load displacement, 26 knots design speed on twin 150HP (110kW) outboards, 400L fuel capacity.

The lightweight part matters as much as the corrosion part. Less hull to push means the engines aren't working as hard, and that tends to show up over a full season of fuel and servicing. The DK-WR is set up for coastal rescue, offshore patrol, passenger transport, fishing and general workboat duty — the kind of work where a boat sitting in the yard for repainting is a boat that isn't earning.

If you're comparing hull materials right now, what's the maintenance job on your current boat that eats the most time? Paint, welds, or something else entirely?

Address

266400
Qingdao
珠山路与北五路交汇处

Alerts

Be the first to know and let us send you an email when Qingdao Dookyu Crown Marine Co., Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Qingdao Dookyu Crown Marine Co., Ltd:

Shortcuts

Share

Category