Graham Race Cars

Graham Race Cars race car fabrication

BB Chev Corvette tri-power intake that had suffered a very bad fire. Welded all the melted areas and have to finish mach...
08/12/2026

BB Chev Corvette tri-power intake that had suffered a very bad fire. Welded all the melted areas and have to finish machining the bolt holes and surfaces. Lucky it didn't completely melt as the carbs suffered a very bad fate as the baesplates were the only things left

Custom made cooling system components.Chev water neck blockoff with b**g for a gauge or sensor hookup.Custom water manif...
08/12/2026

Custom made cooling system components.
Chev water neck blockoff with b**g for a gauge or sensor hookup.
Custom water manifold. This one has a #16 AN inlet with 4 #8 AN outlets and a fill cap.

While waiting for material-tubing-to arrive to finish the side windows,it is assembly time. This can be time consuming a...
08/03/2026

While waiting for material-tubing-to arrive to finish the side windows,it is assembly time. This can be time consuming as every little piece needs to be finished off like adding the internal return tubes in the fuel tank,throttle linkage and weight tabs. In the process of making collector to header tube tabs as this is being posted

Wheelie Bar WednesdayThese bars are 72" long. We can make you wheelie bars in any configuration and length for your need...
07/08/2026

Wheelie Bar Wednesday
These bars are 72" long. We can make you wheelie bars in any configuration and length for your needs

Mustang 8.8 housing on the bench. Lower adjustable control arm/coil-over brackets and steel/aluminum upper bushings. Sta...
07/07/2026

Mustang 8.8 housing on the bench. Lower adjustable control arm/coil-over brackets and steel/aluminum upper bushings. Start of upper control arms.
We do offer a killer adjustable upper bracketry for customers looking for finer tuning.
Please contact us for all your rearend housing needs

For saleMopar 8 3/4 housing,axles and spool40" housing w/std pinion offsetHousing has back brace/internal cage at pumpki...
06/11/2026

For sale
Mopar 8 3/4 housing,axles and spool
40" housing w/std pinion offset
Housing has back brace/internal cage at pumpkin area/rear upper fill b**g and cap
Brand new Strange housing ends-not installed
Brand new Strange 35 spline axles w/bearings and 5/8" studs installed-includes spacers and nuts
Brand new Strange 35 spline spool
Can be finished with what you need for bracketry to your dimensions for an extra charge
Total width of rearend is 45"
Started doing this for a customer but deal went sour when he wanted to go in a different direction.
Anyone building a car this is a good start for a rearend
$1700

06/05/2026

We will have an open spot as of the end of June/beginning of July for a build,whether it be a complete,chassis or anything in between
Let us know what you need

Wing Wednesday3rd gen Camaro now has a wing and the parachute mount done
04/22/2026

Wing Wednesday
3rd gen Camaro now has a wing and the parachute mount done

Address

Whitby, ON
L1P1K4

Opening Hours

Monday 11am - 7pm
Tuesday 11am - 7pm
Thursday 11am - 7pm
Friday 11am - 5pm
Saturday 11am - 4pm

Website

Alerts

Be the first to know and let us send you an email when Graham Race Cars posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category