Min max motors

Call Directions Website Contact the business

Min max motors We do mobile classic and hotrod inspection, consultation and repair! Custom engine shop.

After 9 years at "another guy" Tom's 88 Camaro is moving under it's own power. A lot more power at that!
09/17/2026

After 9 years at "another guy" Tom's 88 Camaro is moving under it's own power. A lot more power at that!

I always tell guys who own corvettes: "it's gotta go in the way it came out." corvette bays are too tight for any mods.W...
08/08/2026

I always tell guys who own corvettes: "it's gotta go in the way it came out." corvette bays are too tight for any mods.

We had to swap water pump balancer and timing cover to make motor actually fit in the car.

Even the valve covers are gonna make it harder to mount the Alt.

Isn't it funny how much of hotrodding is clearanceing?These scorpion rockers where hitting our rocker stud nuts as is ty...
08/07/2026

Isn't it funny how much of hotrodding is clearanceing?

These scorpion rockers where hitting our rocker stud nuts as is typical on performance rockers. Thankfully aluminum is easy to work with and we have clearance once again.

08/06/2026

It's always great seeing (and hearing) one of our motors in a customer car. Thank you Benny Delray !

Build of seguine 302 for his 1982 f100.He started this build years ago and spent too long chasing issues with the engin...
08/05/2026

Build of seguine 302 for his 1982 f100.

He started this build years ago and spent too long chasing issues with the engine from damaged top end to the bottom end blowing after a poor mechanic job.

In the end we build him a newer roller block 302 with modern engineering and classic flair.

When you're not sure on how to keep your land yacht road worthy, give us a call! Whether it's giving you trouble now or ...
08/04/2026

When you're not sure on how to keep your land yacht road worthy, give us a call! Whether it's giving you trouble now or you just need a once over to find any future issues, we can do it all.

'61 Caddy was running a little rough until he called us. We also gave him some advice on how to keep his classic going. From lead additive to part numbers, all written down. Along with a detailed inspection of the car.

Here's an engine that doesn't get much recognition. Or respect for that matter. The AMC/Jeep 2.5 liter 4 cylinder. Basic...
08/03/2026

Here's an engine that doesn't get much recognition. Or respect for that matter. The AMC/Jeep 2.5 liter 4 cylinder. Basically the famous 4.0 jeep with 2 cylinders cut off.

With such a solid lineage you'd think it'd be a pretty good engine. Unfortunately not the case. It was made to replace the GM "iron duke" which remained legendary in terms of reliability while the AMC design was forgotten.

The 2.5 existed in the shadow of the 4.0 forever destined to be the CAFE engine and nothing else.

Don't need the whole engine? No problem, we can leave some of the fun stuff to you!
08/02/2026

Don't need the whole engine? No problem, we can leave some of the fun stuff to you!

Just an all iron corporate blue Chev 350. It's funny how rare a stock rebuild is. Stock or not, with us every rebuild is...
08/01/2026

Just an all iron corporate blue Chev 350. It's funny how rare a stock rebuild is. Stock or not, with us every rebuild is the last one you'll need.

GM must have taken a page out of Ford's book when making the c3 corvette. No parts swap!
07/30/2026

GM must have taken a page out of Ford's book when making the c3 corvette. No parts swap!

Address

Scarborough, ON

Telephone

+14379852287

Website

Alerts

Be the first to know and let us send you an email when Min max motors posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Min max motors:

Shortcuts

Share

Category