What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

Dynotune Racing

Home
Canada
Pickering, ON
Dynotune Racing

Providing Dyno & Tuning Services, Race Engines and transmission builds, performance upgrades for all imports.

06/20/2026

JDM RHD Mitsubishi Lancer Evolution VIII on the dyno this afternoon getting dialed into a nice 626 AWHP and 448 FT LBS on pump gas!!

This car was just bought by the customer with a lot of loose ends and brought straight to us for a complete inspection and service.

Fixed all vacuum leaks
Fixed all oil leaks, resealed pan, front case, all new timing seals, re did timing
Fixed leaking smoking 6466 turbo by setting it up with proper drain, feed and restrictor
Cleaned up fuel system issues
New belt, plugs, and fluids all around
Removed the tune and re dialed in with a fresh Haltech base map

2.4 built stroker
Full ETS 6466 turbo kit
FIC 1200cc injectors
Haltech 2500 ECU
DBW

Onto the dyno to make a nice 626AWHP and 448 FT LBS at only 27psi of boost, fixed all driveability and startup issues and activated the launch control 🔥🔥💪
Another happy customer 🧑‍🔧

06/14/2026

jxedon.evo 2011 Mitsubishi Lancer Evolution X on the dyno this afternoon getting dialed in:
501AWHP and 410FT LBS 💪

Completely stock long block
GTX3576r
31.5 psi
Pump 94 octane
Upgraded fuel system and basic supporting mods

Just another 500+AWHP stock long block pump gas X!!

05/31/2026

2008 Evo X MR SST with completely stock long block, upgraded turbo and supporting mods getting dialed in on the dyno this afternoon!!

We completed an AGT 64mm bolt on turbo install to replace the old Garrett 3076, complete fluids maintenance on the vehicle, fresh spark plugs and a new fuel pump relay.

Completely stock long block, 1000cc injectors, drop in DW fuel pump, intake, full exhaust, upgraded ETS FMIC and piping, 10 plate clutch upgrade, pump 94 octane and a Tephra V3 flash to do dual maps:

441 AWHP 317 FT/LBS at 28 psi Map 1
524 AWHP 377 FT/LBS at 32 psi Map 2

Another AGT 64mm effortlessly doing what it's supposed to do 💯🔥👏

sh1m

05/23/2026

Couple of Evo X's keeping the rollers hot in the last 24 hours!! 🔥🔥

First up completely stock long block GTX3576r powered Evo X with bolt ons owned by .jayden dialed into a nice 512AWHP and 419 FT LBS on pump gas and 32 psi.

Second up, SST stock turbo X with full bolt ons dialed into a nice 370AWHP and 380FT LBS on pump 94 octane after we did an FMIC and piping upgrade.

Lastly we upgraded the turbo on 2014 Evo X to a stock frame 11 blade wheel, new ACT clutch and Flywheel, full fluids maintenance, fresh OEM plugs and fuel pump relay, full 3" exhaust, added Tephra V3 ROM and set the car up with dual maps, low boost and high boost:
268AWHP 286 FT LBS at 22 psi
386AWHP 390 FT LBS at 32 psi

Evo X guys. We can take care of all of your needs 💯🧑‍🔧

05/12/2026

Super clean 1993 Dodge Stealth RT TT all buttoned up and ready to go!!
We fixed a bunch of quirks on this car and got it to perfection 👌

Transmission removed and overhauled to fix leaky input bearing and output seals.
Replaced all spark plugs.
Changed all belts and idlers.
New starter
New CV axle
All fresh fluids
Fixed fuel pressure issue
Added missing dowels to engine/trans and transmission case bell housing.
Fixed a pesky o2 sensor issue which was fouling out the plugs.

Runs like a charm now 💯🧑‍🔧

05/02/2026

Evo 8 MR on the dyno this afternoon after we fixed a bunch of vacuum leaks, installed a 4 bar map sensor and converted over to tephra V7 full speed density.

Got this idling rock steady, driveability perfectly smooth and dialed into 313 AWHP 334 FT LBS with some very minor bolt ons 💯

04/26/2026

2018 Subaru WRX with stock FA20 DIT engine getting dialed in this afternoon via open source tunin/ Subaru Edit.

We installed a full 3" turbo back exhaust, Grimspeed 3 port, and Tomei headers. Car also has Cobb intake, EGR and TGV deletes.

We got everything loaded up and sorted out via Subaru Edit open source software, turned off all necessary DTCs, dialed in on 93 octane, 23 psi of boost:
253 AWHP 324 FT LBS

FA20 owners, give me a call 647 202 6701 or DM to get booked in for your open source tune!! 💯🧑‍🔧

fa20

04/25/2026

Fully built super spicy 2017 Subaru STI on the dyno this afternoon getting dialed in!!

Full speed density tune
Stock ECU using Dimemod ROM/ open source
GTX3576r T3 setup
Fully built engine
ID1050x
Pump 94 octane
Snow Performance m**h kit
All fab work done by
100% m**hanol
Other basic supporting mods

603AWHP and 559FT LBS at 31 psi then we started running out of fuel 💯💯

subiegang

04/16/2026

Mitsubishi Lancer Evolution VIII 5 speed transmission rebuild completed in house 💯

New 4.09 Final Drive
New input shaft
New OEM 5th input gear
New carbon syncros 1-5 and R
New OEM 1-2 sleeve
New OEM 3-4 sleeve
New OEM 5-R sleeve
New OEM bearings
New OEM seals
New OEM syncro springs
Cases hot tanked, cleaned and painted
All preloads reset

Shoot me a DM or call 647-202-6701 for any transmission repairs or rebuilds 🧑‍🔧

04/11/2026

Final Edition Mitsubishi Lancer Evolution X on the dyno with very minimal mods getting a tephra v3 tune this evening!!

This car only has an ETS intake, full 3" exhaust with hi flow cat, stock IC and stock piping, and stock crushed blow off valve.

Dialed into a nice 325AWHP 357 FT LBS, pump 94 octane, open source, Ecuflash and Tephra V3👌

Address

1031 Toy Avenue, Unit D
Pickering, ON
L1W3N9

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm

Telephone

+16472026701

Website

http://dynotuneracing.com/

Alerts

Be the first to know and let us send you an email when Dynotune Racing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Autos & Automotive Service in Pickering?