Boosted JZ Racing & Performance

10/09/2023

If anybody had any items they need to order please message us! We are switching up website providers as shopify was taking massive fees! I'm looking forward to hearing from you! Thanks

05/14/2023

**2JZ-GE Boosted JZ Racing & Performance Stainless Steel Exhaust Manifolds (5 left) IN STOCK**

ALL ORDERS COME WITH A FREE BOOSTEDJZ NEODYMIUM MAGNETIC OIL DRAIN PLUG & 50% OFF ANY TITANIUM STUD KIT! & also earn JZBUCKS for every $1 you spend!

USE THE DISCOUNT CODE TAKEFIVE FOR 5% OFF YOUR ORDER

Checkout BoostedJZ.com for all prices and to place your orders!

DESIGN-INFO:

- Rated for 1200+ HP with 45mm wastegate

-Open Collector, with a T4 Turbo fl**ge.

-Constructed from 321 stainless steel

-Open waste-gate design so you choose the v-band size. (I can weld on whatever size VBand you need for the Wastegate **(SEE OPTIONS ON WEBSITE)**

-Backpurged and built RIGHT!

The first runner has a bend in it so you are NOT limited to the size of turbo you can use because of contact !

I've included the measurements for fitment in other chassis then a supra. Picture is in a my MK4 supra.

(9-1/2 inches) exactly to the back of the WG runner. So if you have more then 9-1/2 inches from the deck surface to the strut tower it will clear just fine(SEE PICTURES) Backpurged and built RIGHT!

OPTIONAL:

- Black TurboSmart Hypergate 45 Wastegate (wg fl**ge welded on)

- 45mm, 50mm, WasteGate V-Band Welded on

- Titanium Exhaust Manifold Stud Kit

05/02/2023

Boosted JZ Racing & Performance has two sets of 2JZ Pistons & Rod combos in stock ready to ship

I-Beam Rods & Piston combo (- 9:0:1 - 86.5mm (Piston rings and wrist pins are included). $1800

H-Beam Rods & Piston combo (- 9:0:1 - 86.5mm (Piston rings and wrist pins are included). $1550

*WHILE SUPPLIES LAST*

Please message me if you have any questions.

04/12/2023

**2JZ-GE Boosted JZ Racing & Performance Stainless Steel Exhaust Manifolds (7 left) IN STOCK**

ALL ORDERS COME WITH A FREE BOOSTEDJZ NEODYMIUM MAGNETIC OIL DRAIN PLUG & 50% OFF ANY TITANIUM STUD KIT! & also earn JZBUCKS for every $1 you spend!

USE THE DISCOUNT CODE TAKEFIVE FOR 5% OFF YOUR ORDER

Checkout BoostedJZ.com for all prices and to place your orders!

DESIGN-INFO:

-Open Collector, with a T4 Turbo fl**ge.

-Constructed from 321 stainless steel

-Open waste-gate design so you choose the v-band size. (I can weld on whatever size VBand you need for the Wastegate **(SEE OPTIONS ON WEBSITE)**

-Backpurged and built RIGHT!

The first runner has a bend in it so you are NOT limited to the size of turbo you can use because of contact !

I've included the measurements for fitment in other chassis then a supra. Picture is in a my MK4 supra.

(9-1/2 inches) exactly to the back of the WG runner. So if you have more then 9-1/2 inches from the deck surface to the strut tower it will clear just fine(SEE PICTURES) Backpurged and built RIGHT!

OPTIONAL:

- Black TurboSmart Hypergate 45 Wastegate (wg fl**ge welded on)

- 45mm, 50mm, WasteGate V-Band Welded on

- Titanium Exhaust Manifold Stud Kit

03/23/2023

**2JZ-GE Boosted JZ Racing & Performance Stainless Steel Exhaust Manifolds IN STOCK**

ALL ORDERS COME WITH A FREE BOOSTEDJZ NEODYMIUM MAGNETIC OIL DRAIN PLUG & 50% OFF ANY TITANIUM STUD KIT! & also earn JZBUCKS for every $1 you spend!

USE THE DISCOUNT CODE TAKEFIVE FOR 5% OFF YOUR ORDER

Checkout BoostedJZ.com for all prices and to place your orders!

DESIGN-INFO:

-Open Collector, with a T4 Turbo fl**ge.

-Constructed from 321 stainless steel

-Open waste-gate design so you choose the v-band size. (I can weld on whatever size VBand you need for the Wastegate **(SEE OPTIONS ON WEBSITE)**

-Backpurged and built RIGHT!

The first runner has a bend in it so you are NOT limited to the size of turbo you can use because of contact !

I've included the measurements for fitment in other chassis then a supra. Picture is in a my MK4 supra.

(9-1/2 inches) exactly to the back of the WG runner. So if you have more then 9-1/2 inches from the deck surface to the strut tower it will clear just fine(SEE PICTURES) Backpurged and built RIGHT!

OPTIONAL:

- Black TurboSmart Hypergate 45 Wastegate (wg fl**ge welded on)

- 45mm, 50mm, WasteGate V-Band Welded on

- Titanium Exhaust Manifold Stud Kit

03/22/2023

We are happy to announce our new Loyalty & Reward Program!

- For every $1 spent you will earn 7 JZBucks!

- Customers earn $1.00 off entire order for every 150 points redeemed

- Applies to orders of any amount!!

Checkout our website boostedJZ.com for all your 2JZ Needs! If you have any questions feel free to give us a message!

BoostedJZ Racing & Performance

03/21/2023

Boosted JZ Racing & Performance is happy to announce a new product to the lineup!

1JZ/2JZ Ignition Coil Pack Brackets! We also sell coils aswell! Orders can be placed on www.BoostedJZ.com

Use discount code TAKEFIVE for 5% off your entire order and also receive a free Magnetic Oil Drain Plug!

We have tons of products in stock!!

-Titanium Dress up bolts!
- Billet Aluminum Valve Covers
- 2JZ-GTE Fuel Rails
- Ignition Coil Brackets
- Ignition Coils
- Intake Manifolds
- Exhauts Manifolds
- Injectors (750cc-2200cc)
- H-Beam Connecting Rods
- I-Beam Connecting Rods
- 1045 Billet Main Caps

If you have any questions feel free to message us!

03/16/2023

Our Boosted JZ Racing & Performance Billet main caps are finally complete! Limited sets available! Place your order on BoostedJZ.com + recieve a free neodymium magnetic oil drain plug!

Our billet main caps are made from 1045 billet steel that is heatreated and then milled to the highest tolerances!

03/11/2023

**INTAKE & EXHAUST STUD KITS IN STOCK**
www.BoostedJZ.com

These Boosted JZ Racing & Performance Titanium studs are shorter then the factory steel studs that are famous for hitting the lower runner on aftermarket exhaust manifolds!!

The use of factory exhaust manifold bolts and studs, especially with an aftermarket header or turbo system, can result in stripped or broken bolts and inadequate clamping force, resulting in exhaust leaks. This stud kit looks great and will allow you to properly clamp the exhaust manifold to the cylinder head without experiencing sealing problems, stud/nut failure, or ugly and troublesome rust.

Our Titanium Studs made of Ti 6Al-4V (Grade 5) and incorporate a 4mm hex key tip that allows them to be easily installed using an Allen wrench. Titanium 14mm 12-point nuts and washers are included. (I HAVE 2 SETS OF 6PT NUTS ALSO)

Shipping in Canada = FREE
Shipping to the USA = $20 US & FREE DUTY
Shipping anywhere eles worldwide = $20 US & FREE DUTY

Prices are posted on BoostedJZ.com & SAVE 10% WITH OUR DISCOUNT CODE ( Studkit10 )

The Exhaust Stud kit contains (12PCE - GTE / 8PCE - GE) M10 x 1.25mm x 45mm titanium studs, nuts, and washers. (Washers may not be needed or used for install)

The Intake Stud kit contains (8PCE - GTE / 10PCE - GE) M8 x 1.25 x 45mm titanium studs, nuts, and washers. (Washers may not be needed or used for install)

The Intake and Exhaust combo kit contains (20PCE - GTE / 18PCE - GE) M10 x 1,25 x 45mm, M8 x 1.25 x 45mm titanium studs, nuts, and washers. (Washers may not be needed or used during install)

The Turbo Stud Kit contains (4PCE - M10x1.50x45mm) Titanium Stud, Nut, and Washer (Washer may not be needed or used during installation. It will vary depending on your setup)

- Titanium is ~45% lighter, stronger, and will not corrode like your stock steel bolts or studs.

- Each stud/washer/nut assembly weighs only 14g

03/07/2023

**2JZ-GE Boosted JZ Racing & Performance oosted JZ Racing & Performance Stainless Steel Exhaust Manifolds IN STOCK**

ALL ORDERS COME WITH A FREE BOOSTEDJZ NEODYMIUM MAGNETIC OIL DRAIN PLUG & 50% OFF ANY TITANIUM STUD KIT!

USE THE DISCOUNT CODE TAKEFIVE FOR 5% OFF YOUR ORDER

ONLY 12 LEFT!

Checkout BoostedJZ.com for all prices and to place your orders!

DESIGN-INFO:

-Open Collector, with a T4 Turbo fl**ge.

-Constructed from 321 stainless steel

-Open waste-gate design so you choose the v-band size. (I can weld on whatever size VBand you need for the Wastegate **(SEE OPTIONS ON WEBSITE)**

-Backpurged and built RIGHT!

The first runner has a bend in it so you are NOT limited to the size of turbo you can use because of contact !

I've included the measurements for fitment in other chassis then a supra. Picture is in a my MK4 supra.

(9-1/2 inches) exactly to the back of the WG runner. So if you have more then 9-1/2 inches from the deck surface to the strut tower it will clear just fine(SEE PICTURES) Backpurged and built RIGHT!

OPTIONAL:

- Black TurboSmart Hypergate 45 Wastegate (wg fl**ge welded on)

- 45mm, 50mm, WasteGate V-Band Welded on

- Titanium Exhaust Manifold Stud Kit

03/02/2023

**2JZ-GE Boosted JZ Racing & Performance Stainless Steel Exhaust Manifolds IN STOCK**

Only 20 Manifolds in stock and 5 already have been sold within 12 hours!

These will not last long, if your interested please send me a message or place your order!

Checkout BoostedJZ.com for all prices and to place your orders!

DESIGN-INFO:

-Open Collector, with a T4 Turbo fl**ge.

-Constructed from 321 stainless steel

-Open waste-gate design so you choose the v-band size.

**(SEE OPTIONS)**

-Backpurged and built RIGHT!

The first runner has a bend in it so you are NOT limited to the size of turbo you can use because of contact !

I've included the measurements for fitment in other chassis then a supra. Picture is in a my MK4 supra.

(9-1/2 inches) exactly to the back of the WG runner. So if you have more then 9-1/2 inches from the deck surface to the strut tower it will clear just fine(SEE PICTURES) Backpurged and built RIGHT!

OPTIONAL:

- Black TurboSmart Hypergate 45 Wastegate (wg fl**ge welded on)

- 45mm, 50mm, WasteGate V-Band Welded on

- Titanium Exhaust Manifold Stud Kit

02/26/2023

These Boosted JZ Racing & Performance Titanium studs are shorter then the factory steel studs that are famous for hitting the lower runner on aftermarket exhaust manifolds!!

The use of factory exhaust manifold bolts and studs, especially with an aftermarket header or turbo system, can result in stripped or broken bolts and inadequate clamping force, resulting in exhaust leaks. This stud kit looks great and will allow you to properly clamp the exhaust manifold to the cylinder head without experiencing sealing problems, stud/nut failure, or ugly and troublesome rust.

Our Titanium Studs made of Ti 6Al-4V (Grade 5) and incorporate a 4mm hex key tip that allows them to be easily installed using an Allen wrench. Titanium 14mm 12-point nuts and washers are included. (I HAVE 2 SETS OF 6PT NUTS ALSO)

Shipping in Canada = FREE
Shipping to the USA = $20 US & FREE DUTY
Shipping anywhere eles worldwide = $20 US & FREE DUTY

Prices are posted on BoostedJZ.com & SAVE 10% WITH OUR DISCOUNT CODE ( Studkit10 )

The Exhaust Stud kit contains (12PCE - GTE / 8PCE - GE) M10 x 1.25mm x 45mm titanium studs, nuts, and washers. (Washers may not be needed or used for install)

The Intake Stud kit contains (8PCE - GTE / 10PCE - GE) M8 x 1.25 x 45mm titanium studs, nuts, and washers. (Washers may not be needed or used for install)

The Intake and Exhaust combo kit contains (20PCE - GTE / 18PCE - GE) M10 x 1,25 x 45mm, M8 x 1.25 x 45mm titanium studs, nuts, and washers. (Washers may not be needed or used during install)

The Turbo Stud Kit contains (4PCE - M10x1.50x45mm) Titanium Stud, Nut, and Washer (Washer may not be needed or used during installation. It will vary depending on your setup)

- Titanium is ~45% lighter, stronger, and will not corrode like your stock steel bolts or studs.

- Each stud/washer/nut assembly weighs only 14g